98%
921
2 minutes
20
Superhydrophobic coatings possess distinct wettability characteristics and hold significant potential in metal corrosion protection and underwater drag reduction. However, their practical application is often hindered by poor durability arising from the fragility of their micro/nanostructured surface roughness. In this study, a durable superhydrophobic coating featuring a hierarchical, hydrangea-like micro/nanostructure was successfully fabricated on an aluminum alloy substrate via a simple one-step cold-spraying technique. The coating consisted of hydrangea-shaped SiO nanoparticles modified with 1H,1H,2H,2H-perfluorodecyltrimethoxysilane (PFDT) to produce multiscale roughness, while epoxy resin (EP) served as the binding matrix to enhance mechanical integrity. The hydrangea-like SiO nanostructures were characterized by solid cores and wrinkled, petal-like outgrowths. This unique morphology not only increased the surface roughness but also provided more active sites for air entrapment, thereby enhancing the coating's overall performance. The h-SiO@PFDT-EP composite coating exhibited excellent superhydrophobicity, with a WCA of 170.1° ± 0.8° and a SA of 2.7° ± 0.5°. Durability was evaluated through sandpaper abrasion, tape peeling, acid and alkali immersion, artificial weathering, and salt spray tests. The results demonstrated that the coating retained stable superhydrophobic performance under various environmental stresses. Compared with bare 6061 aluminum and EP coatings, its corrosion current density was reduced by four and three orders of magnitude, respectively. Furthermore, the coating achieved a maximum drag-reduction rate of 31.01% within a velocity range of 1.31-7.86 m/s. The coating also displayed excellent self-cleaning properties. Owing to its outstanding durability, corrosion resistance, and drag-reducing capability, this one-step fabricated superhydrophobic coating showed great promise for applications in marine engineering and defense.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC12347627 | PMC |
http://dx.doi.org/10.3390/ma18153443 | DOI Listing |
Nanoscale
September 2025
School of Mechanical Engineering, Shandong University of Technology, Zibo 255000, China.
Metal matrix composites are widely employed in aerospace and marine engineering due to their excellent mechanical properties and chemical stability. However, their surfaces remain vulnerable to corrosion, icing, and mechanical wear, severely compromising long-term reliability in harsh environments. Inspired by natural superhydrophobic surfaces such as lotus leaves, functional interfaces with high water repellency and interfacial stability can be engineered through the synergistic design of hierarchical micro/nanostructures and low-surface-energy chemical modifications.
View Article and Find Full Text PDFLangmuir
September 2025
Institute of Technology for Carbon Neutralization, Yangzhou University, Yangzhou 225127, Jiangsu, China.
To expand the application scope of carbon steel, imparting superhydrophobicity to its surface offers an effective strategy to overcome its inherently poor corrosion resistance. However, in marine environments, conventional superhydrophobic coatings often suffer from limited mechanical durability and inadequate long-term corrosion protection. In this study, a durable superhydrophobic bilayer coating composed of PDMS-MWCNTs (top layer) and PDMS (bottom layer) was developed to address these challenges.
View Article and Find Full Text PDFSmall
September 2025
Institute of Interfaces and Particle Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg, Cauerstrasse 4, 91058, Erlangen, Germany.
Repellent surfaces provide resistance to biofouling, ice formation, bacteria adhesion, or corrosion. Inspired by the hierarchical structure of the lotus leaf, such surfaces minimize water adhesion through micro- and nanostructuring. Conventional fabrication methods to mimic the lotus leaf often involve problematic fluorinated compounds, sophisticated preparation conditions, or lack mechanical robustness.
View Article and Find Full Text PDFAdv Sci (Weinh)
September 2025
Department of Architecture and Civil Engineering, City University of Hong Kong, Kowloon, Hong Kong, 999077, China.
Colored radiative cooling (CRC) materials provide a sustainable solution to thermal management, mitigating global warming while maintaining aesthetic appeal. Nevertheless, conventional CRC materials exhibit reduced cooling efficiency due to their significant sunlight absorption and degraded optical performance in dusty outdoor environments. Developing self-cleaning CRC materials with high cooling performance and vibrant color remains challenging.
View Article and Find Full Text PDFACS Omega
August 2025
Renewable Energy Laboratory, National Laboratory Astana (NLA), Nazarbayev University, Kabanbay Batyr 53, Astana 010000, Kazakhstan.
Ice formation on asphalt roads poses severe safety hazards and maintenance issues, especially in cold climates. Traditional deicing methods are typically energy intensive, environmentally adversive, and economically inadvisable. Alternative superhydrophobic coatings (SHCs) have emerged as promising passive anti-icing solutions.
View Article and Find Full Text PDF