Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
Dimethylammonium lead iodide (DMAPbI) has the potential to address the phase stability issue of inorganic perovskite solar cells (PSCs). In this study, the crystallinity, phase structure, defect states, and crystal growth habits of DMAPbI are controlled by adjusting the x value during synthesis, where N,N-dimethylacetamide (DMAC) is used as the solvent to regulate perovskite film growth. Furthermore, large-area CsPbIBr perovskite films with preferred oriented growth are achieved using the optimized x value in DMAPbI through the slot-die coating method. The inorganic PSCs, with a n-i-p structure and the active area of 0.04 cm, achieve a champion power conversion efficiency (PCE) of 19.82%, with an open-circuit voltage (V) of 1.16 V based on perovskite films formed by slot-die coating. This work provides important insights into the DMAPbI-based method for fabricating high-quality inorganic perovskite films, and paves the way for large-area inorganic PSCs fabrication for practical applications.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/smll.202503825 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Differentiating the 2D Passivation from Amorphous Passivation in Perovskite Solar Cells.
Nanomicro Lett
September 2025
College of New Materials and New Energies, Shenzhen Technology University, Lantian Road 3002, Pingshan, 518118, Shenzhen, People's Republic of China.
The introduction of two-dimensional (2D) perovskite layers on top of three-dimensional (3D) perovskite films enhances the performance and stability of perovskite solar cells (PSCs). However, the electronic effect of the spacer cation and the quality of the 2D capping layer are critical factors in achieving the required results. In this study, we compared two fluorinated salts: 4-(trifluoromethyl) benzamidine hydrochloride (4TF-BA·HCl) and 4-fluorobenzamidine hydrochloride (4F-BA·HCl) to engineer the 3D/2D perovskite films.
View Article and Find Full Text PDFInterface Engineering Based on Naphthyl Isomerization for High-Efficiency and Stable Perovskite Solar Cells: Theoretical Simulation and Experimental Research.
Small
September 2025
Key Laboratory of Luminescence Analysis and Molecular Sensing, Ministry of Education, School of Chemistry and Chemical Engineering, Southwest University, Chongqing, 400715, P. R. China.
Perovskites have a large number of intrinsic defects and interface defects, which often lead to non-radiative recombination, and thus affect the efficiency of perovskite solar cells (PSCs). Introducing appropriate passivators between the perovskite layer and the transport layer for defect modification is crucial for improving the performance of PSCs. Herein, two positional isomers, 1-naphthylmethylammonium iodide (NMAI) and 2-naphthylmethylammonium iodide (NYAI) are designed.
View Article and Find Full Text PDFHydrogen-Bond-Directed Chirality Transfer in Helical Polyacetylene-Perovskite-PDMS Elastomeric Films for Stretching-Tunable Multicolor Circularly Polarized Luminescence.
ACS Appl Mater Interfaces
September 2025
State Key Laboratory of Chemical Resource Engineering, Beijing 100029, China.
Circularly polarized luminescence (CPL) has emerged as a critical technology for anticounterfeiting and optical display applications due to its unique chiroptical properties. We report a multicolor CPL-emitting elastomeric film (P37/PSK@SiO-PDMS) that synergistically combines chiral helical polyacetylene (P37) and a surface-engineered perovskite (PSK@SiO) through hydrogen-bond-directed assembly. Confinement within the PDMS matrix drives P37 to self-assemble into a chiral supramolecular structure through hydrogen bonding, inducing a chiroptical inversion.
View Article and Find Full Text PDFLevetiracetam-Assisted Perovskite Crystallization and Tripartite Lead Iodide Reduction in Perovskite Solar Cells.
Adv Mater
September 2025
Key Lab of Artificial Micro- and Nano-Structures of Ministry of Education of China, School of Physics and Technology, Wuhan University, Wuhan, 430072, China.
Sequential deposition technique is widely used to fabricate perovskite films with large grain size in perovskite solar cells (PSCs). Residual lead halide (PbI) in the perovskite film tends to be decomposed into metallic lead (Pb) under long-term heating or light soaking. Here, a chiral levetiracetam (LEV) dopant containing α-amide and pyrrolidone groups is introduced into the PbI precursor solution.
View Article and Find Full Text PDFDensification-Related Optical and Photodetection Properties of Green-Synthesized MAPbI and MAPbI@Graphite Powders.
ACS Omega
September 2025
Institut de Chimie et Procédés pour l'Energie, l'Environnement et la Santé (ICPEES), UMR-7515 CNRS-Université de Strasbourg, 25 rue Becquerel, 67087 Strasbourg, France.
For photodetection applications using 3D hybrid perovskites (HPs), dense and thick films or compacted powders in wafer form are needed and generally require large amounts of HPs. HPs are also often combined with a graphene/carbon layer to improve their conductivity. Among HP synthesis methods, mechanosynthesis, a green synthesis method, provides a large amount of powders, which are furthermore easily densified in compact wafers due to their mechanical activation.
View Article and Find Full Text PDF