98%
921
2 minutes
20
The application of shape memory smart materials in the field of electromagnetic interference (EMI) shielding can compensate for their poor adaptability and promote the development of electromagnetic shielding composite materials towards multi-functionality and intelligence. Herein, an intelligent poly(ethylene--vinyl acetate)/polydopamine/MXene (EVA/PDA/MXene) composite membrane with tunable electromagnetic shielding capability over a wide range was prepared using electrospinning and dip-coating techniques. Firstly, electrospinning technology was used to prepare highly cross-linked EVA fiber membranes. Secondly, the surface of these membranes was modified with dopamine. And finally, dip-deposition technology was employed to tightly attach MXene nanosheets to the surface of the modified membranes. The electromagnetic shielding effectiveness of the EVA/PDA/MXene-30-6 composite membrane in the X-band (8.2-12.4 GHz) is up to 74.7 dB, and both the shape fixation rate () and shape recovery rate () are above 90%. Most importantly, it achieves a reversible tuning of shielding effectiveness from 26.2 dB to 74.7 dB under a tensile strain of 0-30%. Furthermore, the electromagnetic shielding effectiveness of the composite membrane remains virtually unchanged after undergoing continuous bending and folding, and its surface temperature can reach 93.2 °C when subjected to a voltage of 2.5 V, thereby demonstrating exceptional electro-thermal conversion capability. This multifunctional composite membrane, characterized by its adaptability, provides a direction for the development of electromagnetic shielding composites.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1039/d5nr01228g | DOI Listing |
MAGMA
September 2025
Medical Physics in Radiology, German Cancer Research Center (DKFZ), Heidelberg, Germany.
Introduction: This study explores high-impedance surface (HIS) metamaterial shields for enhancing the transmit field in whole-body MRI at 7 T. We studied the possibility of placing a metamaterial layer between the gradient coil and bore liner using electromagnetic simulations to evaluate B and SAR efficiency across different impedances.
Materials And Methods: Simulations were performed in three stages, first metamaterial design and characterization, then single-element dipole simulations with a homogenous phantom, and finally, simulations including a four-element arrays with a virtual body model, including the whole scanner geometry.
Nanoscale
September 2025
Department of Materials Science and Engineering, National University of Singapore, 9 Engineering Drive 1, 117575, Singapore.
Electromagnetic pollution poses significant risks to electronic devices and human health, highlighting the need for mechanically robust, lightweight, and cost-effective electromagnetic interference (EMI) shielding materials. 3D-printed structures with nanomaterial-engineered surfaces offer a promising method for tailoring mechanical and electrical properties through multiscale design. Herein, we present a facile strategy for fabricating lightweight and flexible EMI shielding structures by chemical deposition of nanostructured metal coatings onto 3D-printed polymeric substrates.
View Article and Find Full Text PDFAerosp Med Hum Perform
September 2025
Introduction: Pilots have an increased incidence of cutaneous melanoma compared to the general population; occupational exposure to ultraviolet (UV) radiation is one of several potential risk factors. Cockpit windshields effectively block UVB (280-315 nm) but further analysis is needed for UVA (315-400 nm). The objective of this observational study was to assess transmission of UVA through cockpit windshields and to measure doses of UVA at pilots' skin under daytime flying conditions.
View Article and Find Full Text PDFInt J Biol Macromol
September 2025
Plant Fiber Material Science Research Center, State Key Laboratory of Advanced Papermaking and Paper-based Materials, South China University of Technology, Guangzhou, 510640, China.
The development of cellulose-based electromagnetic shielding materials is critical for the advancement of sustainable, lightweight, and flexible electronic devices. Most high-performance composites rely on nanocellulose, which is expensive and energy-intensive to produce. In this work, we employ chemically modified conventional eucalyptus pulp fibers (non-nano) to fabricate Janus-structured cellulose/MXene composite papers.
View Article and Find Full Text PDFACS Appl Mater Interfaces
September 2025
Department of Mechanical & Industrial Engineering, Louisiana State University, Baton Rouge, Louisiana 70803, United States.
With the rapid advancement in autonomous vehicles, 5G and future 6G communications, medical imaging, spacecraft, and stealth fighter jets, the frequency range of electromagnetic waves continues to expand, making electromagnetic interference (EMI) shielding a critical challenge for ensuring the safe operation of equipment. Although some existing EMI shielding materials offer lightweight construction, high strength, and effective shielding, they struggle to efficiently absorb broadband electromagnetic waves and mitigate dimensional instability and thermal stress caused by temperature fluctuations. These limitations significantly reduce their service life and restrict their practical applications.
View Article and Find Full Text PDF