Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
Tin perovskite solar cells (TPSCs) were developed by adding the co-cations acetamidinium (AC) and rubidium (Rb) in varied proportions based on the FASnI structure (E1). We found that adding 10% AC and 3% Rb can optimize the device (E1AC10Rb3) to attain an efficiency of power conversion of 14.5% with great shelf- and light-soaking stability. The films at varied AC and Rb proportions were characterized using XPS, SEM, AFM, GIWAXS, XRD, TOPAS, TOF-SIMS, UV-vis, PL, TCSPC, and femtosecond TAS techniques to show the excellent optoelectronic properties of the E1AC10Rb3 film in comparison to those of the other films. AC was found to have the effect of passivating the vacancy defects on the surface and near the bottom of the film, while Rb plays a pivotal role in passivating the bottom interface between perovskite and PEDOT:PSS. Therefore, the E1AC10Rb3 device with a band gap of 1.43 eV becomes a promising candidate as a narrow band gap device for tandem lead-free perovskite solar cell development.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11299185 | PMC |
| http://dx.doi.org/10.1021/acs.jpclett.4c01695 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Differentiating the 2D Passivation from Amorphous Passivation in Perovskite Solar Cells.
Nanomicro Lett
September 2025
College of New Materials and New Energies, Shenzhen Technology University, Lantian Road 3002, Pingshan, 518118, Shenzhen, People's Republic of China.
The introduction of two-dimensional (2D) perovskite layers on top of three-dimensional (3D) perovskite films enhances the performance and stability of perovskite solar cells (PSCs). However, the electronic effect of the spacer cation and the quality of the 2D capping layer are critical factors in achieving the required results. In this study, we compared two fluorinated salts: 4-(trifluoromethyl) benzamidine hydrochloride (4TF-BA·HCl) and 4-fluorobenzamidine hydrochloride (4F-BA·HCl) to engineer the 3D/2D perovskite films.
View Article and Find Full Text PDFTheoretical study of Lewis base passivation of p-type surface defects in I-Br mixed-halide tin perovskites.
J Chem Phys
September 2025
Quantum Chemistry Division, Yokohama City University, Seto 22-2, Kanazawa-Ku, Yokohama 236-0027, Kanagawa, Japan.
Perovskite-silicon tandem solar cells have attracted considerable attention owing to their high power conversion efficiency (PCE), which exceeds the limits of single-junction devices. This study focused on lead-free tin-based perovskites with iodine-bromine mixed anions. Bromide perovskites have a wide bandgap; therefore, they are promising light absorbers for perovskite-silicon tandem solar cells.
View Article and Find Full Text PDFDiverse Perovskite Solar Cells: Progress, Challenges, and Perspectives.
Adv Mater
September 2025
School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China.
Perovskite materials have revolutionized optoelectronics by virtue of their tunable bandgaps, exceptional optoelectronic properties, and structural flexibility. Notably, the state-of-the-art performance of perovskite solar cells has reached 27%, making perovskite materials a promising candidate for next-generation photovoltaic technology. Although numerous reviews regarding perovskite materials have been published, the existing reviews generally focus on individual material systems (e.
View Article and Find Full Text PDFInterface Engineering Based on Naphthyl Isomerization for High-Efficiency and Stable Perovskite Solar Cells: Theoretical Simulation and Experimental Research.
Small
September 2025
Key Laboratory of Luminescence Analysis and Molecular Sensing, Ministry of Education, School of Chemistry and Chemical Engineering, Southwest University, Chongqing, 400715, P. R. China.
Perovskites have a large number of intrinsic defects and interface defects, which often lead to non-radiative recombination, and thus affect the efficiency of perovskite solar cells (PSCs). Introducing appropriate passivators between the perovskite layer and the transport layer for defect modification is crucial for improving the performance of PSCs. Herein, two positional isomers, 1-naphthylmethylammonium iodide (NMAI) and 2-naphthylmethylammonium iodide (NYAI) are designed.
View Article and Find Full Text PDFMolecular Extrusion Drives Polymer Dynamic Soft Encapsulation to Inhibit Lead Leakage for Efficient Inverted Perovskite Solar Cells and Modules.
Adv Mater
September 2025
School of Physical Science and Technology, College of Energy, School of Optoelectronic Science and Engineering, Soochow University, Suzhou, 215000, P. R. China.
Polymer additives exhibit unique advantages in suppressing lead leaching from perovskite solar cells (PSCs). However, polymers tend to excessively aggregate in the perovskite film, which hinders comprehensive encapsulation and disrupts charge transport efficiency, degrading lead leakage inhibition and device performance. Herein, a polymer dynamic soft encapsulation strategy driven by molecular extrusion is introduced to mitigate lead leakage in PSCs, achieved through the incorporation of poly(propylene adipate) (PPA) as a multifunctional additive in the perovskite formulation.
View Article and Find Full Text PDF