Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
The growth of epitaxial thin films from the Ruddlesden-Popper series of strontium iridates by magnetron sputtering is analyzed. It was found that, even using a non-stoichiometric target, the films formed under various conditions were consistently of the perovskite-like n = ∞ SrIrO phase, with no evidence of other RP series phases. A detailed inspection of the temperature-oxygen phase diagram underscored that kinetics mechanisms prevail over thermodynamics considerations. The analysis of the angular distribution of sputtered iridium and strontium species indicated clearly different spatial distribution patterns. Additionally, significant backsputtering was detected at elevated temperatures. Thus, it is assumed that the interplay between these two kinetic phenomena is at the origin of the preferential nucleation of the SrIrO phase. In addition, strategies for controlling cation stoichiometry off-axis have also been explored. Finally, the long-term stability of the films has been demonstrated.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10856326 | PMC |
| http://dx.doi.org/10.3390/nano14030242 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Variation of Morphology and Optical Properties of PVD Coated Titanium Dioxide Layers at Different Oxygen Flows.
Microsc Res Tech
September 2025
Department of Physics, West Tehran Branch, Islamic Azad University, Tehran, Iran.
Titanium dioxide (TiO) thin films were deposited on glass substrates under HV conditions at room temperature by the physical vapor deposition method. Produced titanium thin films were post-annealed at 573 K at different oxygen flows (0, 9 and 23 cm/s). The influence of different oxygen flows on nano-structure, crystallography, and optical parameters of TiO films was investigated by XRD, AFM, and spectrophotometer in the UV-VIS wavelength range.
View Article and Find Full Text PDFAdvanced Architectures and Emerging Materials for High-Operating-Temperature Infrared Photodiodes.
Adv Mater
September 2025
College of Integrated Circuits & Micro-Nano Electronics, Fudan University, Shanghai, 200433, China.
High-operating-temperature (HOT) mid-wavelength and long-wavelength infrared photodetectors have emerged as critical enablers for eliminating bulky cryogenic cooling systems, offering transfromative potential in developing compact, energy-efficient infrared technologies with reduced size, weight, power, and cost. Focusing on infrared photodiodes, this review first discusses the fundamental mechanisms limiting performance at elevated operating temperatures. Subsequently, the progress in conventional epitaxial semiconductors, such as HgCdTe, InAsSb, and III-V type-II superlattice is reviewed, highlighting the evolution of device architectures designed to effectively suppress dark currents and approach background-limited performance.
View Article and Find Full Text PDFInfluence of the Metal Support─Catalyst Contact on the Performance of NiO-Based O Evolution Electrocatalysts.
ACS Appl Mater Interfaces
September 2025
Surface Science Laboratory, Department of Materials and Geosciences, Technical University of Darmstadt, Peter-Grünberg-Straße 4, 64287 Darmstadt, Germany.
The performance of NiO-based electrocatalysts for the oxygen evolution reaction (OER) is strongly influenced by the interface between the metal support (current collector) and the catalyst layer, which modulates electronic properties and electrochemical activity. This study systematically investigates the solid-solid interface behavior of NiO thin films prepared by reactive magnetron sputtering on Pt, Au, and Ni, followed by electrochemical characterization. Stepwise NiO deposition and X-ray photoelectron spectroscopy reveal distinct band alignment and electronic structure differences at the metal-catalyst interface.
View Article and Find Full Text PDFUnderstanding efficiency losses from radiative and nonradiative recombination in CuZnSn(S,Se) solar cells.
Nat Commun
September 2025
School of Materials Science and Engineering, Nanyang Technological University, Singapore, Singapore.
The photovoltaic performance of CuZnSn(S,Se) is limited by open-circuit voltage losses (ΔV) in the radiative (ΔV) and non-radiative (ΔV) limits, due to sub-bandgap absorption and deep defects, respectively. Recently, several devices with power conversion efficiencies approaching 15% have been reported, prompting renewed interest in the possibility that the key performance-limiting factors have been addressed. In this work, we analyze the sources of ΔV in these devices and offer directions for future research.
View Article and Find Full Text PDFEvaluation of crosslinked cellulose-based solid and gel polymer electrolytes in lithium-ion batteries.
Int J Biol Macromol
September 2025
Faculty of Polymer Engineering, Sahand University of Technology, P.O. Box 51335-1996, Tabriz, Iran; Institute of Polymeric Materials, Sahand University of Technology, P.O. Box 51335-1996, Tabriz, Iran. Electronic address:
In order to develop an alternate material for energy storage devices like batteries, this research is being done to create polymer electrolytes based on cellulose as natural polymer. Natural polymers as battery components have a number of advantages, including availability, biodegradability, unleakage, stable form, superior process, electrochemical stability, and low cost. In this study, polymer electrolytes based on cellulose have been synthesized by solution casting to prepare a thin polymer films.
View Article and Find Full Text PDF