Efficient Fluoride Wastewater Treatment Using Eco-Friendly Synthesized AlOOH.

Nanomaterials (Basel)

Materials Architecturing Research Center, Korea Institute of Science and Technology, Seoul 02792, Republic of Korea.

Published: October 2023


Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Fluoride ion is essential for health in small amounts, but excessive intake can be toxic. Meeting safety regulations for managing fluoride ion emissions from industrial facilities with both cost-effective and eco-friendly approaches is challenging. This study presents a solution through a chemical-free process, producing a boehmite (AlOOH) adsorbent on aluminum sheets. Utilizing cost-effective Al foil and DI water, rather than typical precursors, yields a substantial cost advantage. The optimized AlOOH adsorbent demonstrated a high fluoride ion removal rate of 91.0% in simulated wastewater with fluoride ion concentrations below 20 ppm and displayed a similar performance in industrial wastewater. Furthermore, the AlOOH adsorbent exhibited excellent reusability through a simple regeneration process and maintained stable performance across a wide pH range of 4 to 11, demonstrating its capability to adsorb fluoride ions under diverse conditions. The efficiency of the AlOOH adsorbent was validated by a high fluoride ion removal efficiency of 90.9% in a semi-batch mode flow cell, highlighting its potential applicability in engineered water treatment systems. Overall, the AlOOH adsorbent developed in this study offers a cost-effective, eco-friendly, and sustainable solution for effectively removing fluoride ion from surface waters and industrial wastewaters.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10648790PMC
http://dx.doi.org/10.3390/nano13212838DOI Listing

Publication Analysis

Top Keywords

fluoride ion
24
alooh adsorbent
20
cost-effective eco-friendly
8
high fluoride
8
ion removal
8
fluoride
7
alooh
6
ion
6
adsorbent
5
efficient fluoride
4

Similar Publications

Valorizing spent lithium iron phosphate battery in biomass pyrolysis for production of valuable chemicals and mitigating pollutant emissions.

Bioresour Technol

September 2025

Department of Earth Resources and Environmental Engineering, Hanyang University, Seoul 04763, Republic of Korea. Electronic address:

The rapid increase of electronic waste, particularly battery waste, presents significant environmental challenges such as pollutant emissions and resource depletion, emphasizing the need for effective valorization and reuse strategies. This study introduces a novel approach for repurposing end-of-life lithium iron phosphate (LFP) batteries as catalysts in the pyrolysis of walnut shells (WS). Characterization analyses revealed that LFP provides both Lewis and Brønsted acid sites, which alter the thermal decomposition pathway of WS.

View Article and Find Full Text PDF

Antipyretic analgesics are typical pharmaceutical and personal care products (PPCPs) that are widely used in our daily life because they relieve fever and pain, and have anti-inflammatory and anti-rheumatic properties. These drugs inhibit the synthesis and release of prostaglandins (PGs) in the neurons of the anterior hypothalamus and exert therapeutic effects as a consequence. However, these drugs are relatively commonly misused and abused, often owing to a lack of proper medication guidance.

View Article and Find Full Text PDF

Bisphenol A (BPA) and its analogs are collectively termed bisphenol compounds (BPs), which are predominantly utilized in the manufacturing of polycarbonate plastics and epoxy resins. BPs are ubiquitous in diverse environmental matrices, human tissues, and metabolic products. Extensive research has demonstrated that BPs exert adverse effects on the nervous, reproductive, immune, and metabolic systems.

View Article and Find Full Text PDF

This report presents the findings of a secondary analysis of the data from an RCT designed to compare salivary fluoride levels during 3 weeks of using 5000 or 1450-ppm fluoride toothpaste (n = 24/group). Following this trial phase, salivary fluoride monitoring continued for 2 weeks during which all 48 participants used 1450-ppm fluoride toothpaste in a wash-out phase. We investigated the temporal variability and longitudinal growth-based trajectories of salivary fluoride levels across study arms.

View Article and Find Full Text PDF

Gel polymer electrolytes (GPEs) with solvent-in-polymer structure typically encounter a trade-off between ionic conductivity and mechanical properties. This challenge has not been adequately addressed by conventional single-material, miscible polymers, or polymer/ceramic composite electrolytes. Herein, the phase consistency of composite GPE matrix, which contains polymer blends of "soft" poly(vinylidene fluoride-co-hexafluoropropylene) (PVHF) and "hard" polyether-ether-ketone (PEEK), is enhanced by ion-mediated compatibilization through the incorporation of lithium sulfonate groups.

View Article and Find Full Text PDF