Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
In this paper, TiCT MXene prepared by LiF/HCl etching method was spin-coated on glass substrate and sapphire substrate as the saturable absorber (SA), and the MXene SA is combined with Yb: LuAG single crystal fiber (SCF) for the first time to achieve a 1.05 µm passively Q-switched pulsed laser output with the average power, pulse width, and repetition frequency of 1.989 W, 149.6 ns, and 365.44 kHz, respectively, which is the highest average power ever reported for passively Q-switched SCF pulsed lasers. This work enriches the research on SCF pulsed lasers and provides a feasible approach for achieving high-power all-solid-state pulsed lasers.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OE.477118 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
The temperature-dependent second threshold criteria for the Nd:YVO/Cr:YAG passively Q-switched (PQS) laser is explored. The emission cross section of the Nd:YVO crystal is found to decrease as temperature elevates, which is feasible to reach the PQS second threshold with a flexible cavity design. We derive theoretical analysis and experimentally verify it by demonstrating the cavity mode size ratio variation between those on the gain medium and the saturable absorber.
View Article and Find Full Text PDFIn this study, detailed experimental investigations of the passively -switched (PQS) erbium-doped fiber laser (EDFL) were reported based on nickel ferrite (-) thin-film saturable absorber (SA). The - nanoparticles (NPs) were synthesized using a sol-gel autocombustion mechanism, and its thin film was prepared in polyvinyl alcohol (PVA) via the solution casting method. The crystallographic structure, surface morphology, and particle size of - NPs were characterized using the X-ray diffraction (XRD) technique, high-resolution transmission electron microscopy (HR-TEM), and scanning electron microscopy (SEM).
View Article and Find Full Text PDFPdX (X = S, Se) saturable absorbers for passively Q-switched Er:YAP laser at 3 μm.
Opt Express
July 2025
In this work, two-dimensional (2D) PdX (X = S, Se) nanosheets were successfully fabricated via the ultrasound-assisted liquid-phase exfoliation (LPE) method and characterized comprehensively. Employing open-aperture (OA) Z/I-scan techniques, the nonlinear absorption (NLA) properties of the samples in the mid-infrared (MIR) region were systematically investigated, which revealed that PdX (X = S, Se) nanosheets exhibited excellent saturable absorption characteristics at 3 μm. The large effective NLA coefficient, high modulation depth, and low saturation intensity highlight their potential as high-performance saturable absorbers (SAs).
View Article and Find Full Text PDFA coaxially end-pumped passively Q-switched orthogonally-polarized dual-wavelength laser at 2 µm with dual Tm,Ho:LuLiF (LLF) laser crystals as the gain media and a Cr:ZnS crystal as the saturable absorber is reported for the first time, as far as we know. The maximum average output powers of 63.4 mW at 2050nm in P-polarization direction and 43.
View Article and Find Full Text PDFHalogen-Tuned BiOX (X = Cl, Br, I) Layered Crystals with Superior Broadband Nonlinear Saturable Absorption for Pulsed Laser Modulation.
ACS Appl Mater Interfaces
July 2025
State Key Lab of Crystal Materials, Shandong University, Jinan 250100, China.
Nonlinear optical (NLO) materials play indispensable roles in various fields, such as information, energy, and biology. However, the ideal NLO materials necessitate a balance between the band gap and the nonlinear coefficient, which severely restricts the further development of nonlinear optics. BiOX (X═Cl, Br, and I) crystals, with their layered structure, combine the advantages of nontoxicity, a tunable band gap, and remarkable optoelectronic properties, rendering them highly promising NLO materials.
View Article and Find Full Text PDF