Kluyveromyces marxianus as a microbial cell factory for lignocellulosic biomass valorisation.

Biotechnol Adv

CEB-Centre of Biological Engineering, University of Minho, 4710-057 Braga, Portugal; LABBELS -Associate Laboratory, Braga/Guimarães, Portugal. Electronic address:

Published: November 2022


Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

The non-conventional yeast Kluyveromyces marxianus is widely used for several biotechnological applications, mainly due to its thermotolerance, high growth rate, and ability to metabolise a wide range of sugars. These cell traits are strategic for lignocellulosic biomass valorisation and strain diversity prompts the development of robust chassis, either with improved tolerance to lignocellulosic inhibitors or ethanol. This review summarises bioethanol and value-added chemicals production by K. marxianus from different lignocellulosic biomasses. Moreover, metabolic engineering and process optimization strategies developed to expand K. marxianus potential are also compiled, as well as studies reporting cell mechanisms to cope with lignocellulosic-derived inhibitors. The main lignocellulosic-based products are bioethanol, representing 71% of the reports, and xylitol, representing 17% of the reports. K. marxianus also proved to be a good chassis for lactic acid and volatile compounds production from lignocellulosic biomass, although the literature on this matter is still scarce. The increasing advances in genome editing tools and process optimization strategies will widen the K. marxianus-based portfolio products.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.biotechadv.2022.108027DOI Listing

Publication Analysis

Top Keywords

lignocellulosic biomass
12
kluyveromyces marxianus
8
biomass valorisation
8
process optimization
8
optimization strategies
8
lignocellulosic
5
marxianus microbial
4
microbial cell
4
cell factory
4
factory lignocellulosic
4

Similar Publications

The concept of the circular bioeconomy is a carbon neutral, sustainable system with zero waste. One vision for such an economy is based upon lignocellulosic biomass. This lignocellulosic circular bioeconomy requires CO absorption from biomass growth and the efficient deconstruction of recalcitrant biomass into solubilized and fractionated biopolymers which are then used as precursors for the sustainable production of high-quality liquid fuels, chemical bioproducts and bio-based materials.

View Article and Find Full Text PDF

Cotton stalk (CTS) and corn stover (CRS) were pretreated using solid alkali (NaOH or Ca(OH)) assisted ball milling (BM). The physicochemical properties of the pretreated materials and their high-solid enzymatic hydrolysis performance were systematically investigated. The interaction between alkali and straw was synergistically enhanced by mechanical force generated during BM, achieving effective lignin removal.

View Article and Find Full Text PDF

Environmental pollution from toxic metals and waste generation have become major global concerns, driven by industrial and agricultural growth. To produce the adsorbent, the fungus Aspergillus niger ATCC 1004 was inoculated into cocoa pod husk bran. The samples were labeled as fermented solid (FS) and non-fermented solid (NFS) and characterized using X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, point of zero charge, and surface area analysis via N₂adsorption using the Brunauer-Emmett-Teller method.

View Article and Find Full Text PDF

Lignocellulosic materials derived from by-products such as cellulose typically provide enhanced interfacial properties when functionalized with coupling agents, such as maleic anhydride (MA), and incorporated into polylactic acid (PLA) polymers. This research aims to identify the optimal conditions for either improving or maintaining PLA properties evaluating interactions by incorporating varying amounts of cellulose (5-28 wt%) extracted from sawdust biomass and PLA-g-MA (3-20 wt%) composites into pure PLA. This is accomplished through an extreme vertices mixture design (EVMD).

View Article and Find Full Text PDF

Establishment of an antimetabolite-based transformation system for the wood-decaying basidiomycete .

Appl Environ Microbiol

September 2025

Course in Molecular Biology, Division of Biosphere Science, Graduate School of Environmental Science, Hokkaido University, Sapporo, Japan.

The model wood-decaying basidiomycete has been extensively studied to elucidate the molecular mechanisms of wood decomposition. However, genetic studies have been limited by the lack of adequate genetic tools. Here, we established an antimetabolite-based transformation system, originally developed for ascomycetes, for use in .

View Article and Find Full Text PDF