Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
Compared with the polycrystal (PC) Ni-rich cathode materials, the single-crystal (SC) counterpart displayed excellent structural stability, high reversible capacity and limited voltage decay during cycling, which received great attention from academics and industry. However, the origin of fascinating high-voltage stability within SC is poorly understood yet. Herein, we tracked the evolution of phase transitions, in which the destructive volume change and H3 phase formation presented in PC, are effectively suppressed in SC when cycling at a high cut-off voltage of 4.6 V, further clarifying the origin of high-voltage stability in SC cathode. Moreover, SC electrode displayed crack-free morphology, and excellent electrochemical stability during long-term cycling, whereas PC suffered severe capacity and voltage fade because of the spinel-like phase, decoding the failure mechanisms of PC and SC during cycling at high cut-off voltages. This finding provides universal insights into high-voltage stability and failure mechanisms of layered Ni-rich cathode materials.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/anie.202207225 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Improved cyclability of high-voltage LiCoO by the coating of medium-entropy nanomaterials.
Nanoscale
September 2025
School of Materials and Energy, University of Electronic Science and Technology of China, Chengdu 611731, China.
Although improving the charging cutoff voltage is an effective strategy to increase its capacity, LiCoO ("LCO") undergoes rapid capacity decay due to severe structural and interface degradations at high voltages. Herein, we proposed a multifunctional surface modification by coating nano-sized entropy materials (Li-La-Ti-Zr-Co-O, Nano-MEO). Nano-MEO rivets were constructed on the surface of LCO, which stabilized the fragile surface.
View Article and Find Full Text PDFLeveraging for an Exquisite Symmetric Supercapacitor─A Cost-Effective MnCO Synthesis Approach for Energy Storage Application.
J Phys Chem Lett
September 2025
Department of Materials and Mineral Resources Engineering, National Taipei University of Technology, No. 1, Section 3, Chung-Hsiao East Road, Taipei 106, Taiwan.
Sugarcane () was employed as a sustainable carbon source to synthesize three-dimensional (3D) spherical manganese carbonate (MnCO) microspheres, offering a green route to advanced electrode material for high-energy-density symmetric supercapacitors. Although numerous synthesis strategies and material modifications have been explored, a detailed evaluation of environmentally friendly synthesis pathways remains essential. In this study, MnCO microspheres were successfully synthesized via a sugar-derived green synthesis followed by hydrothermal treatment.
View Article and Find Full Text PDFDesign and preliminary results of the microwave-driven proton ion source developed at the Center for Energy Research.
Rev Sci Instrum
September 2025
HUN-REN Centre for Energy Research, Budapest, Hungary.
A novel medium-current (up to 20 mA), low normalized beam emittance (<1 π mm mrad) electron cyclotron resonance microwave H+ ion source has been developed at the Center for Energy Research in Budapest, Hungary. This high-stability design targets an energy ripple below 1% while delivering a continuous or pulsed proton beam with adjustable pulse duration (0.1-10 ms) and frequency (0.
View Article and Find Full Text PDFDegradation of LiNiMnO Cathodes in the PFSI Ionic Liquid Electrolyte and Carbonate Electrolytes.
ACS Appl Mater Interfaces
September 2025
Department of Materials Science and Engineering, Norwegian University of Science and Technology, NO-7491 Trondheim, Norway.
LiNiMnO (LNMO) is a promising material for the cathode of lithium-ion batteries (LiBs); however, its high operating voltage causes stability issues when used with carbonate battery electrolytes. Ionic liquids are a viable alternative to conventional carbonate solvents due to their thermal stability and electrochemical window. This work reports the performance of LNMO/Li half cells with an ionic liquid electrolyte (ILE) composed of 0.
View Article and Find Full Text PDFDevelopment of Thermally Stable Ionic Liquid-Based Composite Polymer Electrolytes Enabled by In Situ Polymerization for Lithium-Ion Rechargeable Batteries.
ACS Omega
September 2025
Department of Chemical Engineering, Hongik University, 94 Wausan-ro, Mapo-gu, Seoul 04066, Republic of Korea.
Commercial lithium-ion batteries using organic solvent-based liquid electrolytes (LEs) face safety issues, including risks of fire and explosion. As a safer alternative, solid-state electrolytes are being extensively explored to replace these organic solvent-based LEs. Among various solid electrolyte options, polymer electrolytes offer advantages such as flexibility and ease of processing.
View Article and Find Full Text PDF