98%
921
2 minutes
20
Li intercalates into a pure face-centered-cubic (fcc) C structure instead of being adsorbed on a single C molecule. This hinders the excess storage of Li ions in Li-ion batteries, thereby limiting their applications. However, the associated electrochemical processes and mechanisms have not been investigated owing to the low electrochemical reactivity and poor crystallinity of the C powder. Herein, a facile method for synthesizing pure fcc C nanoparticles with uniform morphology and superior electrochemical performance in both half- and full-cells is demonstrated using a 1 m LiPF solution in ethylene carbonate/diethyl carbonate (1:1 vol%) with 10% fluoroethylene carbonate. The specific capacity of the C nanoparticles during the second discharge reaches ≈750 mAh g at 0.1 A g , approximately twice that of graphite. Moreover, by applying in situ X-ray diffraction, high-resolution transmission electron microscopy, and first-principles calculations, an abnormally high Li storage in a crystalline C structure is proposed based on the vacant sites among the C molecules, Li clusters at different sites, and structural changes during the discharge/charge process. The fcc of C transforms tetragonal via orthorhombic Li C and back to the cubic phase during discharge. The presented results will facilitate the development of novel fullerene-based anode materials for Li-ion batteries.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1002/adma.202104763 | DOI Listing |
Natl Sci Rev
September 2025
College of Chemistry, Huazhong Agricultural University, Wuhan 430070, China.
The stress distribution in Li metal strongly affects the interfacial Li-ion diffusion, thereby influencing the morphology of plated Li and the performance of the battery. Here, we report a mechano-electrochemical coupling strategy that utilizes an arched structured carbon aerogel to achieve stable Li-plating/stripping electrochemistry. The arch-structured carbon aerogel can actively regulate stress distributions in response to the compressive stresses induced by Li deposition, generating the transition of stress from compressive on the convex surface to tensile on the concave surface, which can effectively promote the Li-migration kinetics and thus suppress the non-uniform deposition of Li.
View Article and Find Full Text PDFNat Mater
September 2025
Frontiers Science Center for Transformative Molecules, State Key Laboratory of Synergistic Chem-Bio Synthesis, School of Chemistry and Chemical Engineering, Zhangjiang Institute for Advanced Study, Shanghai Jiao Tong University, Shanghai, China.
Anode-free lithium (Li) metal batteries are promising candidates for high-performance energy storage applications. Nonetheless, their translation into practical applications has been hindered by the slow kinetics and reversibility of Li plating and stripping on copper foils. Here we report a two-dimensional polyamide (2DPA)/lithiated Nafion (LN) interphase layer for anode-free Li metal batteries.
View Article and Find Full Text PDFChemSusChem
September 2025
Institute of Organic Chemistry, Ulm University, Albert-Einstein-Allee 11, 89081, Ulm, Germany.
Organic battery electrode materials represent a sustainable alternative compared to most inorganic electrodes, yet challenges persist regarding their energy density and cycling stability. In this work, a new organic electrode material is described, which is obtained via ionothermal polymerization of low-cost starting materials, melem (2,5,8-triamino-tri-s-triazine) and perylenetetracarboxylic dianhydride (PTCDA). The resulting networked polymer Melem-PDI exhibits favorable thermal and electrochemical properties, prompting investigation into its performance as a positive electrode material in rechargeable lithium and magnesium batteries.
View Article and Find Full Text PDFACS Omega
September 2025
College of Intelligent Science and Control Engineering, Jinling Institute of Technology, Nanjing 211169, Jiangsu, China.
State of charge (SOC) is extremely critical to the reliability of lithium-ion (Li-ion) battery utilization. In this study, a novel problem in which internal differences occurred in the battery package, causing uncertain SOC initialization of each battery unit, is solved by combining the variational theorem and the extended Kalman filter (EKF) algorithm. First, the importance of the initialized SOC setting of each unit in the battery package is proposed by determining the theoretical relationship between the initialization value and the current estimation result.
View Article and Find Full Text PDFRSC Adv
September 2025
Physics Department, College of Sciences, University of Ha'il P. O. Box 2440 Ha'il Saudi Arabia.
In the scope of designing Li-ion batteries with increased energy density, developing new high-performance, stable, and inexpensive cathode materials remains a significant challenge. In this context, the LiSrNiFePO material was synthesized and systematically investigated. Using Density Functional Theory (DFT) calculations, the structural stability and electronic structure were investigated during the delithiation process.
View Article and Find Full Text PDF