Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
Liquid exfoliated, 2-dimensional (2D), few layered graphene and molybdenum disulfide nanosheets (GNS and MNS) are size selected for EMI shielding application. Scanning electron microscopy (SEM) has confirmed the lateral dimensions increase (1-2 µm for GNS and MNS) with lowering centrifugation speed (1000 to 500 rpm). The micron size (~ 15 µm) restacked structures of GNS and MNS (L ~ 2 µm) over a nylon membrane have shown ~ 16 dB and ~ 6 dB EMI shielding effectiveness (1-8 GHz frequency), respectively. The enhanced EMI shielding effectiveness for GNS-500 may be credited to its high carrier mobility as well as high aspect ratio of nanosheets. The GNS-500 are further dispersed (0.3 wt.%) in thermoplastic polyurethane for their applicability as flexible EMI shielding material. The dielectric characteristics predicted an enhancement for the attenuation (200 MHz-1 GHz). The experimental results (1-8 GHz) suggested the maximum attenuation ~ 18 dB showing the composite applicability as a broadband EMI shielding material.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7725840 | PMC |
| http://dx.doi.org/10.1038/s41598-020-78614-6 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Chemically deposited Cu nanocubes on a PUA gyroid lattice for lightweight and flexible electromagnetic interference shielding.
Nanoscale
September 2025
Department of Materials Science and Engineering, National University of Singapore, 9 Engineering Drive 1, 117575, Singapore.
Electromagnetic pollution poses significant risks to electronic devices and human health, highlighting the need for mechanically robust, lightweight, and cost-effective electromagnetic interference (EMI) shielding materials. 3D-printed structures with nanomaterial-engineered surfaces offer a promising method for tailoring mechanical and electrical properties through multiscale design. Herein, we present a facile strategy for fabricating lightweight and flexible EMI shielding structures by chemical deposition of nanostructured metal coatings onto 3D-printed polymeric substrates.
View Article and Find Full Text PDFHigh-strength Janus cellulose/MXene composite paper from deep eutectic solvent-carboxymethylated eucalyptus fibers for electromagnetic shielding.
Int J Biol Macromol
September 2025
Plant Fiber Material Science Research Center, State Key Laboratory of Advanced Papermaking and Paper-based Materials, South China University of Technology, Guangzhou, 510640, China.
The development of cellulose-based electromagnetic shielding materials is critical for the advancement of sustainable, lightweight, and flexible electronic devices. Most high-performance composites rely on nanocellulose, which is expensive and energy-intensive to produce. In this work, we employ chemically modified conventional eucalyptus pulp fibers (non-nano) to fabricate Janus-structured cellulose/MXene composite papers.
View Article and Find Full Text PDFA Multifunctional Closed-Cell Composite Foam: Temperature-Independent Dimensional Stability, Multi-Shape Memory, and Robust Electromagnetic Wave Absorption.
ACS Appl Mater Interfaces
September 2025
Department of Mechanical & Industrial Engineering, Louisiana State University, Baton Rouge, Louisiana 70803, United States.
With the rapid advancement in autonomous vehicles, 5G and future 6G communications, medical imaging, spacecraft, and stealth fighter jets, the frequency range of electromagnetic waves continues to expand, making electromagnetic interference (EMI) shielding a critical challenge for ensuring the safe operation of equipment. Although some existing EMI shielding materials offer lightweight construction, high strength, and effective shielding, they struggle to efficiently absorb broadband electromagnetic waves and mitigate dimensional instability and thermal stress caused by temperature fluctuations. These limitations significantly reduce their service life and restrict their practical applications.
View Article and Find Full Text PDFHigh wet-strength MXene/lignin-containing cellulose nanofibrils composite films with Janus structure for electromagnetic shielding and Joule heating.
Int J Biol Macromol
September 2025
State Key Laboratory of Advanced Paper making and Paper-based Materials, South China University of Technology, Guangzhou, Guangdong Province, 510640, PR China.
Developing MXene-based electromagnetic interference (EMI) shielding composite films with exceptional wet mechanical properties is crucial to address the limitation of conventional MXene-based EMI shielding composite films in humid environments. Herein, we present a fabrication strategy for Janus-structured MXene-based EMI shielding composite films with exceptional wet mechanical and Joule heating performances. Through depositing tannic acid-modified MXene (TM) on maleic anhydride-modified lignin-containing cellulose nanofibril (MLCNF) film using a scalable vacuum filtration and hot-pressing strategy.
View Article and Find Full Text PDFOne-Pot Asymmetric Assembly of Hierarchical Triple-Layer Nickel Foam/Titanium Carbonitride MXene Aerogels for Superior Microwave Absorption and Tailored Thermal Management.
Small
September 2025
Department of Mechanical Engineering, University of Alberta, 9211-116 Street NW, Edmonton, Alberta, T6G 1H9, Canada.
Rapid strides in portable electronics and telecommunication technologies have sharply escalated the demand for high-performance electromagnetic interference (EMI) shielding materials that effectively suppress secondary electromagnetic pollution while simultaneously integrating thermal management. Here an innovative, lightweight, hierarchical triple-layer aerogel structure comprising nickel (Ni) foam (NiF), titanium carbonitride (TiCNT) MXene, and poly(vinyl alcohol) (PVA), fabricated via a facile, one-step bidirectional freeze-casting process is presented. This asymmetric aerogel architecture strategically employs an impedance-matching MXene/PVA top layer for optimized microwave entry, a NiF/MXene/PVA interlayer introducing magnetic loss and enhancing heat conduction, and a reflective, thermally foamed MXene bottom layer promoting internal reflection for superior energy absorption.
View Article and Find Full Text PDF