Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
Lamellar eutectic structure in AlCoCrFeNi high-entropy alloy (HEA) is emerging as a promising candidate for structural applications because of its high strength-ductility combination. The alloy consists of a fine-scale lamellar + B2 microstructure with high flow stresses > 1300 MPa under quasi-static tensile deformation and >10% ductility. The response to shear loading was not investigated so far. This is the first report on the shear deformation of a eutectic structured HEA and effect of precipitation on shear deformation. A split-Hopkinson pressure bar (SHPB) was used to compress the hat-shaped specimens to study the local dynamic shear response of the alloy. The change in the width of shear bands with respect to precipitation and deformation rates was studied. The precipitation of L1 phase did not delay the formation of adiabatic shear bands (ASB) or affect the ASB width significantly, however, the deformed region around ASB, consisting of high density of twins in phase, was reduced from 80 µm to 20 µm in the stronger precipitation strengthened condition. We observe dynamic recrystallization of grains within ASBs and local mechanical response of individual eutectic lamellae before and after shear deformation and within the shear bands was examined using nano-indentation.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC7516913 | PMC |
| http://dx.doi.org/10.3390/e22040431 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Tuneable multidirectional mechanical attributes of novel sectionally nonlinearly functionally graded femur and cranial bone implants with triply periodic minimal surfaces.
PLoS One
September 2025
Mechanical and Nuclear Engineering Department, Khalifa University of Science and Technology, Abu Dhabi, United Arab Emirates.
Sectionally nonlinearly functionally graded (SNFG) structures with triply periodic minimal surface (TPMS) are considered ideal for bone implants because they closely replicate the hierarchical, anisotropic, and porous architecture of natural bone. The smooth gradient in material distribution allows for optimal load transfer, reduced stress shielding, and enhanced bone ingrowth, while TPMS provides high mechanical strength-to-weight ratio and interconnected porosity for vascularization and tissue integration. Wherein, The SNFG structure contains sections with thickness that varies nonlinearly along their length in different patterns.
View Article and Find Full Text PDFPlasticity Mechanisms in Nanostructured Cubic Boron Nitride: Internal Defects and Amorphous Layers.
ACS Appl Mater Interfaces
September 2025
School of Materials Science and Engineering, Beihang University, Beijing 100191, P. R. China.
Nanostructured cubic boron nitride (NS-cBN) has attracted significant attention due to its high hardness and excellent thermal stability, yet a systematic strategy to balance strength and toughness through atomically structural design remains elusive. Here, we integrate plasticity theory with large-scale atomistic simulations to elucidate the size-dependent roles of internal defects, i.e.
View Article and Find Full Text PDFComputational Fluid Dynamics of the Flow of the Deformable Toroidal Embolic Agents Within Straight and Stenotic Pipes by Full Eulerian FSI Method.
Int J Numer Method Biomed Eng
September 2025
Department of Chemical System Engineering, School of Engineering, The University of Tokyo, Tokyo, Japan.
The effect of shape and size of embolic agents on embolization phenomena has been discussed clinically for transcatheter arterial chemoembolization (TACE). We numerically discussed the unique embolization behavior of new deformable toroidal microparticles in blood vessels by computational fluid dynamics simulations. We employed an Eulerian-Eulerian (full Eulerian) fluid-structure interaction (FSI) method to analyze the flow and deformation behaviors of a deformable torus in a cylindrical pipe.
View Article and Find Full Text PDFDynamic alteration of blood vessel geometry is an inherent feature of the circulatory system. However, while the engineering of multiscale, branched, and interconnected blood vessels has been well explored, mimicking the dynamic behavior (e.g.
View Article and Find Full Text PDFImpact of carotid web orientation on long-term thrombus growth risk: A numerical study using fluid-solid interaction.
Comput Methods Programs Biomed
August 2025
School of Computer Science and Technology, Southwest University of Science and Technology, Mianyang 621010, China. Electronic address:
Background: Carotid web (CaW) is a rare fibromuscular dysplasia lesion at the carotid bifurcation linked to thromboembolic events in young patients. CaW-induced hemodynamic disturbances contribute to thrombosis, but the impact of CaW morphology on long-term thrombotic risk remains unclear.
Method: This study developed three-dimensional numerical models based on patient-specific carotid artery anatomy with CaW angles of 30°, 60°, and 90° (models A, B, and C).