Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
We propose and experimentally demonstrate an apodized bidirectional grating coupler for high-efficiency, perfectly vertical coupling. Through grating apodization, the coupling efficiency (CE) can be notably improved, and the parasitic reflections can be minimized. For ease of fabrication, subwavelength gratings are introduced, which are also beneficial for the coupling performance. Simulation shows a record CE of 72%. We found that the coupler is quite robust to the variation of incidence mode field diameter and fiber misalignment. A CE of -1.8 dB is experimentally measured with a 1-dB bandwidth of 37 nm.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OL.44.005081 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Using dielectric deflective metasurfaces, we propose a novel, to the best of our knowledge, out-of-plane modulation scheme to realize vertical coupling on a 220 nm silicon-on-insulator platform. The metasurface is used to deflect vertical incident light to an oblique angle with high efficiency in the cladding layer. This deflection introduces a lateral wave vector component, thus preventing bi-directional transmission of traditional vertical coupling due to the second-order Bragg reflection of the grating.
View Article and Find Full Text PDFNumerical Demonstration of 800 Gbps WDM Silicon Photonic Transmitter with Sub-Decibel Surface-Normal Optical Interfaces.
Micromachines (Basel)
February 2022
School of Electronic and Information Engineering, Tiangong University, Tianjin 300387, China.
We propose and numerically demonstrate an 800 Gbps silicon photonic transmitter with sub-decibel surface-normal optical interfaces. The silicon photonic transmitter is composed of eight silicon Mach-Zehnder optical modulators and an interleaved AMMI WDM device. This WDM device comprises two 1 × 4 angled MMI and a Mach-Zehnder interferometer (MZI) optical interleaver with an apodized bidirectional grating which has about -0.
View Article and Find Full Text PDFWe propose and experimentally demonstrate an apodized bidirectional grating coupler for high-efficiency, perfectly vertical coupling. Through grating apodization, the coupling efficiency (CE) can be notably improved, and the parasitic reflections can be minimized. For ease of fabrication, subwavelength gratings are introduced, which are also beneficial for the coupling performance.
View Article and Find Full Text PDFThe design of a bidirectional free-space optical interconnect system is presented. Vertical-cavity surface-emitting laser (VCSEL) arrays as a coherent light source and VCSEL beam collimation are described. Hologram array design and a way to improve the diffraction efficiency by use of a copying technique utilizing Dupont photopolymers are presented.
View Article and Find Full Text PDFA low-loss SAW-TV-IF filter with an extended impedance matching range.
IEEE Trans Ultrason Ferroelectr Freq Control
October 2012
Hitachi Ltd., Yokohama.
A novel low-loss SAW (surface acoustic wave) filter for an intermediate frequency (IF) circuit in a color TV receiver has been developed. It consists of an apodized bidirectional and an unapodized group-type unidirectional transducer. The unidirectional transducer is designed to use different numbers of finger pairs in sending and reflecting electrodes for extension of the impedance-matching range.
View Article and Find Full Text PDF