98%
921
2 minutes
20
Tetrodes, consisting of four twisted micro-wires can simultaneously record the number of neurons in the brain. To improve the quality of neuronal activity detection, the tetrode tips should be modified to increase the surface area and lower the impedance properties. In this study, tetrode tips were modified by the electrodeposition of Au nanoparticles (AuNPs) and dextran (Dex) doped poly (3,4-ethylenedioxythiophene) (PEDOT). The electrochemical properties were measured using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). A decrease in the impedance value from 4.3 MΩ to 13 kΩ at 1 kHz was achieved by the modified tetrodes. The cathodic charge storage capacity (CSC) of AuNPs-PEDOT deposited tetrodes was 4.5 mC/cm, as determined by CV measurements. The tetrodes that were electroplated with AuNPs and PEDOT exhibited an increased surface area, which reduced the tetrode impedance. recording in the ventral posterior medial (VPM) nucleus of the thalamus was performed to investigate the single-unit activity in normal rats. To evaluate the recording performance of modified tetrodes, spontaneous spike signals were recorded. The values of the L-ratio, isolation distance and signal-to-noise (SNR) confirmed that electroplating the tetrode surface with AuNPs and PEDOT improved the recording performance, and these parameters could be used to effectively quantify the spikes of each cluster.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC6318560 | PMC |
http://dx.doi.org/10.5607/en.2018.27.6.593 | DOI Listing |
Microsyst Nanoeng
July 2025
Shenzhen Key Laboratory of Biomimetic Robotics and Intelligent Systems, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, China.
Ferroptosis is an iron-dependent form of regulated cell death driven by phospholipid peroxidation and the accumulation of reactive oxygen species (ROS), holding significant importance for therapeutic applications via its induction or inhibition. Accurate detection of intracellular Fe and ROS is essential, as these molecules play essential roles in initiating and propagating ferroptosis. In this study, we present a novel electrochemical nanoprobe for real-time, highly selective detection of intracellular Fe.
View Article and Find Full Text PDFBiosensors (Basel)
June 2025
Center for Bioelectronics, Old Dominion University, Norfolk, VA 23508, USA.
We are reporting the development of a high-performance, non-enzymatic electrochemical biosensor for selective lactate detection, integrating laser-induced graphene (LIG), gold nanoparticles (AuNPs), and a molecularly imprinted polymer (MIP) synthesized from poly(3,4-ethylenedioxythiophene) (PEDOT). The LIG electrode offers a highly porous, conductive scaffold, while electrodeposited AuNPs enhance catalytic activity and signal amplification. The PEDOT-based MIP layer, electropolymerized via cyclic voltammetry, imparts molecular specificity by creating lactate-specific binding sites.
View Article and Find Full Text PDFAnal Chem
April 2025
Key Laboratory of Modern Agricultural Equipment and Technology, School of Agricultural Engineering, Ministry of Education, Jiangsu University, Zhenjiang 212013, Jiangsu, China.
The combination of diuron (DU) and thidiazuron (TDZ) is commonly used in cotton production for its excellent adaptability to low temperatures, which may lead to increased crop and soil pollution. The simultaneous detection of DU and TDZ poses significant challenges due to their weak and overlapping signals, along with an unclear electrochemical detection mechanism for TDZ. This study developed a dual-channel multifunctional molecularly imprinted electrochemical (MMIP-EC) sensing platform by optimizing the substrate material and MIP layer for high performance.
View Article and Find Full Text PDFFront Chem
August 2024
Center of Excellence for Advanced Materials Research (CEAMR), King Abdulaziz University, Jeddah, Saudi Arabia.
An electrochemical nitrite sensor probe is introduced herein using a modified flat glassy carbon electrode (GCE) and SrTiO material doped with spherical-shaped gold nanoparticles (Au-NPs) and polypyrrole carbon (PPyC) at a pH of 7.0 in a phosphate buffer solution. The nanocomposites (NCs) containing Au-NPs, PPyC, and SrTiO were synthesized by ultrasonication, and their properties were thoroughly characterized through structural, elemental, optical, and morphological analyses with various conventional spectroscopic methods, such as field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, high-resolution transmission electron microscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, and Brunauer-Emmett-Teller method.
View Article and Find Full Text PDFTalanta
October 2024
Institute of Life Science, and Laboratory of Tissue and Cell Biology, Laboratory Teaching & Management Center, Chongqing Medical University, Chongqing, 400016, China. Electronic address:
To enhance personalized diabetes management, there is a critical need for non-invasive wearable electrochemical sensors made from flexible materials to enable continuous monitoring of sweat glucose levels. The main challenge lies in developing glucose sensors with superior electrochemical characteristics and high adaptability. Herein, we present a wearable sensor for non-enzymatic electrochemical glucose analysis.
View Article and Find Full Text PDF