Stretchable, Bifacial Si-Organic Hybrid Solar Cells by Vertical Array of Si Micropillars Embedded into Elastomeric Substrates.

ACS Appl Mater Interfaces

Department of Materials Science and Engineering , Yonsei University, Seoul 03722 , Korea.

Published: January 2019


Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Stretchable electronics has enabled many unforeseen applications in a variety of fields. Mechanical design concepts to achieve the stretchability without affecting the device functionality, however, are limited to few known practices, such as mechanical buckling, serpentine shape, or simple elastomeric composites. In this paper, we propose another mechanics design principle for high stretchability (>100%) based on the composite of vertical array of Si micropillars embedded into elastomer poly(dimethylsiloxane). The orthogonalization of active functional elements to applied strain direction enables highly stretchable electronic devices, where the applied strain is mostly absorbed into elastomer on interpillar space. On the other hand, the vertical pillars do not experience any noticeable strain at all. As a proof-of-concept demonstration, we fabricate stretchable Si-organic hybrid solar cells using such a design and the cell shows reasonable level of cell efficiency compared with planar counterparts. The cell can be stretched reversibly without any noticeable performance degradation. Furthermore, the cell can be operated in a bifacial mode by employing stretchable, transparent Ag nanowire-based electrodes. The mechanical design for stretchability demonstrated here would provide new opportunities for stretchable electronics.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.8b17826DOI Listing

Publication Analysis

Top Keywords

si-organic hybrid
8
hybrid solar
8
solar cells
8
vertical array
8
array micropillars
8
micropillars embedded
8
stretchable electronics
8
mechanical design
8
applied strain
8
stretchable
6

Similar Publications

Polymer modulators in silicon photonics: review and projections.

Nanophotonics

September 2022

Department of Electrical and Computer Engineering, University of British Columbia, 2332 Main Mall V6T 1Z4, Vancouver, BC, Canada.

Optical modulators are vital for many applications, including telecommunication, data communication, optical computing, and microwave photonic links. A compact modulator with low voltage drive requirement, low power, high speed, and compatibility with CMOS foundry process is highly desirable. Current modulator technologies in Si suffer from trade-offs that constrain their power, performance (speed, drive voltage), and area.

View Article and Find Full Text PDF

Improvement of the Optoelectrical Properties of a Transparent Conductive Polymer via the Introduction of ITO Nanoparticles and Its Application in Crystalline Silicon/Organic Heterojunction Solar Cells.

ACS Appl Mater Interfaces

July 2021

Key Laboratory for Special Functional Materials and Structure Design of Ministry of Education, School of Materials and Energy, Lanzhou University, Lanzhou 730000, China.

Compared with conventional transparent conductive indium tin oxide (ITO) films, poly(3,4-ethylenedioxythiophene):poly (styrenesulfonic acid) (PEDOT:PSS) as a conductive polymer material has been diffusely applied in organic optoelectronic devices. However, its optoelectrical properties need to be further improved. Therefore, a simple and universal approach with introducing ITO nanoparticles (NPs) was proposed to improve the optoelectrical properties of PEDOT:PSS thin films.

View Article and Find Full Text PDF

We numerically analyzed the modulation characteristics of an InP organic hybrid (IOH) optical modulator consisting of an InP slot waveguide and an electro-optic (EO) polymer. Since InP has a higher electron mobility and a lower electron-induced free-carrier absorption than Si, the series resistance of an InP slot waveguide can be significantly reduced with relatively smaller optical loss than an Si slot waveguide. As a result, the trade-off between optical loss and modulation bandwidth can be remarkably improved compared with a Si organic hybrid (SOH) optical modulator.

View Article and Find Full Text PDF

Tailoring the Vertical Morphology of Organic Films for Efficient Planar-Si/Organic Hybrid Solar Cells by Facile Nonpolar Solvent Treatment.

ACS Appl Mater Interfaces

June 2020

Institute of New Energy Technology, College of Information Science and Technology, Jinan University, Guangzhou 510632, China.

The optical and electrical properties of the blending organic film poly(3,4-ethylenedioxy-thiophene):poly(styrenesulfonate) (PEDOT:PSS) are strongly affected by its morphology, resulting in the performance variation in Si/organic hybrid solar cells. Here, a facile postsolvent treatment is used to tailor the vertical morphology of PEDOT:PSS by introducing a nonpolar solvent. X-ray photoelectron spectroscopy depth-profiling measurements show that the distribution of PEDOT and PSS on the surface of n-type Si can be changed by nonpolar solvent -hexane (NHX) treatment, where more PSS aggregate at the bottom of the blend film and more PEDOT float up to the top, as compared with the reference sample.

View Article and Find Full Text PDF

Stretchable electronics has enabled many unforeseen applications in a variety of fields. Mechanical design concepts to achieve the stretchability without affecting the device functionality, however, are limited to few known practices, such as mechanical buckling, serpentine shape, or simple elastomeric composites. In this paper, we propose another mechanics design principle for high stretchability (>100%) based on the composite of vertical array of Si micropillars embedded into elastomer poly(dimethylsiloxane).

View Article and Find Full Text PDF