98%
921
2 minutes
20
The observation of inverted magnetic hysteresis loops and negative magnetic remanence (NRM) in a 7.6 nm thin film of LaSrMnO grown on SrTiO substrates is reported. The film was grown employing pulsed laser deposition and characterized by reflection high-energy electron diffraction during growth and using x-ray reflectivity measurements post-growth. Magnetic properties of the film were measured from 5 K to 400 K under both the field-cooled (FC) and zero-field-cooled (ZFC) conditions. The observed results of inverted magnetic hysteresis loops and NRM are interpreted in terms of the co-existence of a magnetically inhomogeneous region consisting of superparamagnetic spin clusters with a blocking temperature T = 240 K and the ferromagnetic state with an ordering temperature T = 290 K. Hysteresis loop inversion is observed in the temperature region of T < T < T whereas NRM appears in the mixed superparamagnetic and ferromagnetic states for T < T down to 5 K. These observations of hysteresis loop inversion and NRM are related to the magneto-static interaction between the superparamagnetic and ferromagnetic phases leading to anti-alignment of spin of both magnetic phases with respect to each other.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1088/1361-648X/aade14 | DOI Listing |
ACS Appl Mater Interfaces
September 2025
Advanced Materials Institute, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250014, China.
Improving electrostrain in lead-free piezoelectric materials is critical for practical use. This study examines KTN crystals and employs two primary strategies to enhance their electrostrain: (1) Cu doping creates a restoring force enabling reversible domain switching. (2) Polarizing Cu:KTN crystals and applying an electric field perpendicular to the polarization direction ensure that all domains contribute to the strain.
View Article and Find Full Text PDFPhys Chem Chem Phys
September 2025
Department of Electrical and Electronics Engineering, Koç University, Sariyer, Istanbul 34450, Turkey.
Skyrmion-based devices promise energy-efficient spintronic functionalities, but polycrystalline magnetic films can degrade performance by inducing skyrmion pinning. Here, we use micromagnetic modeling to quantify the impact of polycrystallinity-induced variability in key material parameters such as saturation magnetization, Dzyaloshinskii-Moriya interaction, and uniaxial anisotropy on skyrmion stability, dynamics, and hysteresis loops in Co/Pt films and device geometries. We demonstrate that variations exceeding 5% in these parameters across grains significantly increase the likelihood of pinning, with the effects depending on both grain size and distribution.
View Article and Find Full Text PDFSensors (Basel)
August 2025
Department of Applied Physics, Escuela de Ingeniería de Gipuzkoa, EIG, University of the Basque Country, UPV/EHU, Plaza Europa 1, 20018 San Sebastian, Spain.
Soft magnetic materials are highly suitable for use as sensors in the monitoring of materials, applications, and processes, with proven effectiveness across various industries. Their ability to be configured as microwires allows excellent integration within composite structures, making them particularly effective for structural health monitoring. Research in this area has enabled the analysis of both hysteresis loops and scattering parameters in transmission and reflection within the microwave frequency range, under conditions such as composite matrix polymerization or when subjecting specimens to different stress states.
View Article and Find Full Text PDFSci Rep
August 2025
School of Civil Engineering, Vellore Institute of Technology, Chennai, India.
Precast concrete walls are widely used in modular construction due to their speed of assembly and structural efficiency. However, the presence and size of openings can significantly influence their seismic performance. This study investigates the effect of opening dimensions on the seismic behavior of precast wall specimens subjected to cyclic lateral loading, with a focus on failure mechanisms, hysteretic response, load capacity, and deformability.
View Article and Find Full Text PDFJ Mater Chem B
August 2025
School of Materials Science and Engineering, Central South University, Changsha 410083, China.
Fe-Mn-Cu alloys show promise for temporary bone implants due to Fe's biodegradability, Mn's enhanced antiferromagnetism, and Cu's antibacterial properties. Microwave sintering is a prevalent metal processing technique, offering unique volumetric heating that can enhance physicomechanical properties. However, its application to Fe-Mn-Cu alloys remains underexplored.
View Article and Find Full Text PDF