Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
Purpose: Magnetic resonance image-guided radiotherapy (MRgRT) has the potential to increase the accuracy of radiation treatment delivery. Several research groups have developed hybrid MRgRT devices differing by radiation source used and magnetic field orientation and strength. In this work, we investigate the impact of different magnetic field orientations and strengths on the treatment planning of nonsmall cell lung cancer patients (NSCLC).
Methods: A framework using the in-house developed treatment planning system matRad and the EGSnrc Monte Carlo code system was introduced to perform Monte Carlo-based treatment planning in the presence of a magnetic field. A specialized spectrum-based source model for the beam qualities of 6 MV and cobalt-60 was applied. Optimized plans for stereotactic body radiation therapy (SBRT) and intensity-modulated radiation therapy (IMRT) were generated for four NSCLC patients in the presence of different magnetic field orientations and strengths which are applied in hybrid MRgRT devices currently under development or in clinical use.
Results: SBRT and IMRT treatment planning could be performed with consistent plan quality for all magnetic field setups. Only minor effects on the treatment planning outcome were found in the case of magnetic fields orientated perpendicular to the beam direction. Compared to the perpendicular magnetic field orientation, the inline orientation showed the capability to reduce the dose to lung while maintaining equal target coverage. Particularly for tumors with a central position in lung, a distinct dose reduction was obtained which led to a maximum reduction of mean lung dose by 18.5% (0.5 Gy), when applying a 1 T inline magnetic field.
Conclusion: All plans generated in this work obtained dose metrics within clinical constraints according to RTOG guidelines. When considering conventional dose metrics, no detrimental effects due to the magnetic fields were observed on the dose to the tumor or to organs at risk. An evaluation of the effects on skin dose was not ascertainable due to the simplified specification of the source model used. By accounting for the magnetic field during treatment planning, a dose reduction in lung could be achieved for inline-oriented magnetic fields. An inline orientation of the magnetic field therefore showed a potential benefit when treating NSCLC with MRgRT.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1002/mp.12631 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Practical photonic bandgap structures for high frequency axion haloscopes.
Rev Sci Instrum
September 2025
Department of Nuclear Engineering, University of California, Berkeley, Berkeley, California 94720, USA.
Current and future searches for dark matter axions, based on their resonant conversion to photons in a magnetic field, span many orders of magnitude. A major impediment to designing resonators at the high end of this range, 5 GHz and above, is the proliferation of TE modes, which overwhelm and hybridize with the TM010 mode to which the axion couples, making the search impossible. We demonstrate that a photonic bandgap structure can be designed that completely suppresses the TE spectrum, even reducing the number of lattice periods to two or one and violating perfect lattice symmetry.
View Article and Find Full Text PDFDesign and preliminary results of the microwave-driven proton ion source developed at the Center for Energy Research.
Rev Sci Instrum
September 2025
HUN-REN Centre for Energy Research, Budapest, Hungary.
A novel medium-current (up to 20 mA), low normalized beam emittance (<1 π mm mrad) electron cyclotron resonance microwave H+ ion source has been developed at the Center for Energy Research in Budapest, Hungary. This high-stability design targets an energy ripple below 1% while delivering a continuous or pulsed proton beam with adjustable pulse duration (0.1-10 ms) and frequency (0.
View Article and Find Full Text PDFLevetiracetam-Assisted Perovskite Crystallization and Tripartite Lead Iodide Reduction in Perovskite Solar Cells.
Adv Mater
September 2025
Key Lab of Artificial Micro- and Nano-Structures of Ministry of Education of China, School of Physics and Technology, Wuhan University, Wuhan, 430072, China.
Sequential deposition technique is widely used to fabricate perovskite films with large grain size in perovskite solar cells (PSCs). Residual lead halide (PbI) in the perovskite film tends to be decomposed into metallic lead (Pb) under long-term heating or light soaking. Here, a chiral levetiracetam (LEV) dopant containing α-amide and pyrrolidone groups is introduced into the PbI precursor solution.
View Article and Find Full Text PDFGravitational and Magnetic Bi-Field Assisted One-Step Quick Fabrication of Implantable Micro Zn-Ion Hybrid Supercapacitor.
Adv Healthc Mater
September 2025
Energy Storage Institute of Lanzhou University of Technology, School of Materials Science and Engineering, State Key Laboratory of Advanced Processing and Recycling of Non-ferrous Metals, Lanzhou University of Technology, Lanzhou, 730050, China.
The rapid advancement of implantable medical electronic devices has spurred substantial research into implantable energy storage systems. However, the presence of multiple film resistors in traditional sandwich structures impedes further enhancements in the electrochemical performance of supercapacitors and may result in contact failures between electrodes and separators or catastrophic short-circuit failures during tissue deformation. This study introduces a novel approach for fabricating all-in-one Zn-ion hybrid supercapacitors, which effectively mitigates performance degradation and safety concerns arising from interfacial issues.
View Article and Find Full Text PDFInsights into the piezo-photocatalytic activity and optimized magnetic recovery of hybrid bismuth ferrite-based nanosystems.
Nanoscale Adv
August 2025
Department of Chemistry and Industrial Chemistry & INSTM RU, University of Genoa Via Dodecaneso 31 16146 Genova (GE) Italy
Bismuth ferrite (BiFeO), a perovskite oxide with both ferroelectric and antiferromagnetic properties, has emerged as a promising material for environmental cleanup due to its piezo-photocatalytic activity. The material's ability to degrade organic pollutants, such as azo dyes, under both light irradiation and mechanical stress (ultrasonic waves) offers a dual-action mechanism for efficient wastewater treatment. In this work, we explore the synthesis of BiFeO nanoparticles a simple sol-gel method, followed by characterization of their structural, magnetic, and photocatalytic properties.
View Article and Find Full Text PDF