Electrostatic Limit of Detection of Nanowire-Based Sensors.

Small

Department of Physical Electronics, School of Electrical Engineering, Tel-Aviv University, Ramat-Aviv, 69978, Israel.

Published: October 2015


Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Scanning gate microscopy is used to determine the electrostatic limit of detection (LOD) of a nanowire (NW) based chemical sensor with a precision of sub-elementary charge. The presented method is validated with an electrostatically formed NW whose active area and shape are tunable by biasing a multiple gate field-effect transistor (FET). By using the tip of an atomic force microscope (AFM) as a local top gate, the field effect of adsorbed molecules is emulated. The tip induced charge is quantified with an analytical electrostatic model and it is shown that the NW sensor is sensitive to about an elementary charge and that the measurements with the AFM tip are in agreement with sensing of ethanol vapor. This method is applicable to any FET-based chemical and biological sensor, provides a means to predict the absolute sensor performance limit, and suggests a standardized way to compare LODs and sensitivities of various sensors.

Download full-text PDF

Source
http://dx.doi.org/10.1002/smll.201500566DOI Listing

Publication Analysis

Top Keywords

electrostatic limit
8
limit detection
8
detection nanowire-based
4
nanowire-based sensors
4
sensors scanning
4
scanning gate
4
gate microscopy
4
microscopy determine
4
determine electrostatic
4
detection lod
4

Similar Publications

Decades of antibiotic misuse have spurred an antimicrobial resistance crisis, creating an urgent demand for alternative treatment options. Although phototherapy has therapeutic potential, the efficacy of the most advanced photosensitizers (PS) is essentially limited by aggregation-induced quenching, which significantly reduces their therapeutic effect. To address these challenges, we developed a cationic metallocovalent organic framework (CRuP-COF) via a solvent-mediated dual-reaction synthesis strategy.

View Article and Find Full Text PDF

Dual-functional hydrochar via hydrothermal carbonization for norfloxacin removal: Fractal adsorption kinetics and mechanism elucidation.

Sci Total Environ

September 2025

Laboratoire Physico-Chimie des Matériaux, Substances Naturelles et Environnement, Faculty of Sciences and Techniques, Abdelmalek Essaâdi University, Tangier, Morocco.

Escalating concentrations of norfloxacin (NFX) in surface and wastewaters demand sustainable remediation strategies. In this study, dual-functional hydrochars were synthesized from argan nut shells (ArNS) via hydrothermal carbonization (HTC), with process conditions optimized by varying temperature (150-200 °C) and residence time (2-6 h). Among the materials, H1:5@150-4-prepared at 150 °C for 4 h with a biomass-to-water ratio of 1:5-exhibited the best performance, achieving a monolayer NFX adsorption capacity of 27.

View Article and Find Full Text PDF

Rational design of Pt-integrated SnNbO/BiMoO monolayer S-scheme heterojunction for efficient ethylene removal toward fresh produce preservation.

J Colloid Interface Sci

September 2025

Ministry-of-Education Key Laboratory for the Green Preparation and Application of Functional Materials, Hubei Key Laboratory of Polymer Materials, School of Materials Science & Engineering, Hubei University, Wuhan 430062, PR China. Electronic address:

Effective removal of ethylene (CH) during fruit and vegetables storage and transport remains a critical challenge for post-harvest preservation. Although S-scheme heterojunctions can improve charge separation and redox capacity for ethylene degradation, their efficiency is still restricted by limited carrier transfer and sluggish oxygen activation. Here, we rationally designed a novel 2D/2D SnNbO/BiMoO monolayer S-scheme heterojunction integrated with Pt co-catalyst to address these limitations.

View Article and Find Full Text PDF

Bioremediation offers a sustainable strategy for mitigating heavy metal contamination in soil, but is often constrained by slow removal kinetics, limited uptake efficiency, and high implementation costs. This study investigates dried mycelium membranes, rich in surface-bound proteins and high surface area, as a promising biosorbent for in situ Pb(II) remediation in urban soils. Untreated mycelium membranes buried in soil achieved Pb(II) removal efficiencies of ∼70 % and ∼40 % at initial lead soil concentrations of 100 mg/kg and 1500 mg/kg, respectively, within eight days.

View Article and Find Full Text PDF

Natural products have emerged as a vital source of active ingredients in medicine, food, and cosmetics due to their unique biological activities, safety profiles, and sustainability. However, most bioactive compounds in natural products are intensely bitter, limiting their use in pharmaceuticals and foods. The bitter taste attributes vary markedly among different compound classes, predominantly due to their structural characteristics.

View Article and Find Full Text PDF