Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
We report for the first time the fabrication of p-type SiC nanowire field-effect transistors (FETs) using an individual Al-doped 3C-SiC nanowire with a single crystalline structure. The Raman spectroscopy of the as-grown p-type wire indicates that the linewidth and peak intensity of LO-phonon bands are sensitive to temperature variations.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1039/c1cc10863h | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Photo-Piezojunction Coupling Effect in n-3C-SiC/p-Si Heterojunction - A Platform for Self-Powered Strain-Sensing Applications.
ACS Appl Mater Interfaces
April 2025
Queensland Micro- and Nanotechnology Centre, Griffith University, 170 Kessels Road, Brisbane, Queensland 4111, Australia.
It is beneficial to investigate multifunctional self-powered sensors with high sensitivity and energy-scavenging capabilities, which are essential for the development of a smart infrastructure in the era of 5G and Internet of Things (IoT). This paper reports the photo-piezojunction coupling effect, i.e.
View Article and Find Full Text PDFImpact of Doping on Cross-Sectional Stress Assessment of 3C-SiC/Si Heteroepitaxy.
Materials (Basel)
May 2023
Consiglio Nazionale delle Ricerche, Istituto per la Microelettronica e Microsistemi (CNR-IMM), Ottava Strada n.5, 95121 Catania, Italy.
In this paper, we used micro-Raman spectroscopy in cross-section to investigate the effect of different doping on the distribution of stress in the silicon substrate and the grown 3C-SiC film. The 3C-SiC films with a thickness up to 10 μm were grown on Si (100) substrates in a horizontal hot-wall chemical vapor deposition (CVD) reactor. To quantify the influence of doping on the stress distribution, samples were non-intentionally doped (NID, dopant incorporation below 10 cm), strongly n-type doped ([N] > 10 cm), or strongly p-type doped ([Al] > 10 cm).
View Article and Find Full Text PDFSurface-potential-modulated piezoresistive effect of core-shell 3C-SiC nanowires.
Nanotechnology
September 2022
Department of Mechanical Engineering, Graduate School of Engineering, Kobe University, Kobe, Japan.
The effect of surface potential on the carrier mobility and piezoresistance of core-shell silicon carbide nanowires (SiC NWs) was investigated to realize small and sensitive SiC-microelectromechanical systems sensors. The p-type cubic crystalline SiC (3C-SiC) NWs were synthesized via the vapor-liquid-solid method and coated with silicon dioxide (SiO) or aluminum oxide (AlO) dielectric shells to form core-shell structured NWs with different surface potentials. Four-point bending devices (FBDs) with a field-effect transistor (FET) configuration integrating a single core-shell 3C-SiC NW as the FET channel were fabricated to apply an additional electric field and strain to the core-shell 3C-SiC NWs.
View Article and Find Full Text PDFFabrication of a Monolithic Implantable Neural Interface from Cubic Silicon Carbide.
Micromachines (Basel)
June 2019
Department of Electrical Engineering, University of South Florida, Tampa, FL 33620, USA.
One of the main issues with micron-sized intracortical neural interfaces (INIs) is their long-term reliability, with one major factor stemming from the material failure caused by the heterogeneous integration of multiple materials used to realize the implant. Single crystalline cubic silicon carbide (3C-SiC) is a semiconductor material that has been long recognized for its mechanical robustness and chemical inertness. It has the benefit of demonstrated biocompatibility, which makes it a promising candidate for chronically-stable, implantable INIs.
View Article and Find Full Text PDFSuperinjection of Holes in Homojunction Diodes Based on Wide-Bandgap Semiconductors.
Materials (Basel)
June 2019
Laboratory of Nanooptics and Plasmonics, Moscow Institute of Physics and Technology, Dolgoprudny 141700, Russia.
Electrically driven light sources are essential in a wide range of applications, from indication and display technologies to high-speed data communication and quantum information processing. Wide-bandgap semiconductors promise to advance solid-state lighting by delivering novel light sources. However, electrical pumping of these devices is still a challenging problem.
View Article and Find Full Text PDF