Photoinitiated CVD antifouling coatings enable long-term stability of flexible multifunctional neural probes for chronic neural recording.

Flexible neural probes with integrated recording, optical stimulation, and drug delivery capabilities offer unprecedented access to neural circuit dynamics. However, their long-term utility is compromised by foreign body responses that isolate recording sites from target neurons. This study introduces photoinitiated chemical vapor deposition (piCVD) as a transformative approach to neural interface stability through ultrathin (<100 nm) anti-fouling coatings.

Improving the Enrichment of Submicron-Sized Particles by Size Decreasing of Cruciform Cross-Sectional Microchannel in Viscoelastic Microfluidics.

The manipulation of cells and bioparticles has garnered significant interest in the field of viscoelastic microfluidics, particularly regarding its capacity for single-stream focusing within a three-dimensional and simple microchannel structure. The inherent simplicity of this method enables the effective manipulation of particles, facilitating the separation and focusing of various cell types, including blood cells, circulating tumor cells (CTCs), and microalgae. However, the viscoelastic nature of the particles imposes limitations in the handling of submicron-sized particles, due to a significant decrease in the viscoelastic force acting on the particle.

A New Polymer-Coated Xenogeneic Extracellular Matrix to Prevent Postoperative Adhesion Readily Applicable in the Clinic.

Post-neurosurgical dura reconstruction is crucial for preventing CSF leakage and reducing infection risk. When primary closure is not possible, synthetic and semisynthetic dura substitutes are commonly used, but postoperative adhesions remain a major complication, particularly in reoperations for brain tumors and spinal surgeries. To address this, the use of initiated chemical vapor deposition (iCVD) is investigated to create a polymer-coated dura substitute that minimizes adhesions.

Nanomaterial-Enhanced Biosensing: Mechanisms and Emerging Applications.

Biosensors serve as indispensable analytical tools in biomedical diagnostics, environmental monitoring, and personalized healthcare, offering operation simplicity, cost-effectiveness, high sensitivity, and portability. Nanostructure integration has overcome traditional sensing platform limitations, particularly in sensitivity and response dynamics. These nanoscale materials-including nanoparticles, nanowires, nanosheets, and nanotubes-leverage unique physicochemical properties such as high surface-to-volume ratio, quantum confinement effects, and plasmonic interactions to enhance biosensor performance significantly.

Macroencapsulation Device with Anti-inflammatory Membrane Modification Enhances Long-Term Viability and Function of Transplanted β Cells.

Treating type 1 diabetes (T1D) through β-cell macroencapsulation is a promising long-term solution, but it faces challenges such as immune-mediated fibrosis on the capsule surface, which impairs cell functionality and compromises longevity and effectiveness. This study presents an approach for including an anti-inflammatory molecule on the macroencapsulation device (MED) using initiated chemical vapor deposition for the surface modification of poly(tetrafluoroethylene) (PTFE) membranes. The surface-modified MEDs significantly reduced fibrosis, improved β-cell viability and functionality, and promoted M2 macrophage polarization, which is associated with anti-inflammatory effects.

Viscoelastic particle focusing and separation in a microfluidic channel with a cruciform section.

Considerable attention has been given to elasto-inertial microfluidics, which are widely applied for the focusing, sorting, and separation of particles/cells. In this work, we propose a novel yet simple fabrication process for a microchannel with a cruciform section, where elasto-inertial particle focusing is explored in a viscoelastic fluid. SU-8 master molds for polydimethylsiloxane (PDMS) structures were fabricated via standard photolithography, and then plasma bonding, following self-alignment between two PDMS structures, was performed for the formation of a microchannel with a cruciform section.

Long-Term Culture of Human Pluripotent Stem Cells in Xeno-Free Condition Using Functional Polymer Films.

Human pluripotent stem cells (hPSCs), encompassing human embryonic stem cells (hESCs) and human induced pluripotent stem cells (hiPSCs), hold immense potential in regenerative medicine, offering new opportunities for personalized cell therapies. However, their clinical translation is hindered by the inevitable reliance on xenogeneic components in culture environments. This study addresses this challenge by engineering a fully synthetic, xeno-free culture substrate, whose surface composition is tailored systematically for xeno-free culture of hPSCs.

Neuronal innervation regulates the secretion of neurotrophic myokines and exosomes from skeletal muscle.

Myokines and exosomes, originating from skeletal muscle, are shown to play a significant role in maintaining brain homeostasis. While exercise has been reported to promote muscle secretion, little is known about the effects of neuronal innervation and activity on the yield and molecular composition of biologically active molecules from muscle. As neuromuscular diseases and disabilities associated with denervation impact muscle metabolism, we hypothesize that neuronal innervation and firing may play a pivotal role in regulating secretion activities of skeletal muscles.

Nanoscale surface coatings and topographies for neural interfaces.

With the lack of minimally invasive tools for probing neuronal systems across spatiotemporal scales, understanding the working mechanism of the nervous system and limited assessments available are imperative to prevent or treat neurological disorders. In particular, nanoengineered neural interfaces can provide a solution to this technological barrier. This review covers recent surface engineering approaches, including nanoscale surface coatings, and a range of topographies from the microscale to the nanoscale, primarily focusing on neural-interfaced biosystems.

Particle Separation in a Microchannel with a T-Shaped Cross-Section Using Co-Flow of Newtonian and Viscoelastic Fluids.

In this study, we investigated the particle separation phenomenon in a microchannel with a T-shaped cross-section, a unique design detailed in our previous study. Utilizing a co-flow system within this T-shaped microchannel, we examined two types of flow configuration: one where a Newtonian fluid served as the inner fluid and a viscoelastic fluid as the outer fluid (Newtonian/viscoelastic), and another where both the inner and outer fluids were Newtonian fluids (Newtonian/Newtonian). We introduced a mixture of three differently sized particles into the microchannel through the outer fluid and observed that the co-flow of Newtonian/viscoelastic fluids effectively separated particles based on their size compared with Newtonian/Newtonian fluids.

Streamlined Specimen Purification for Rapid COVID-19 Diagnosis Using Positively Charged Polymer Thin Film-Coated Surfaces and Chamber Digital PCR.

The ongoing coronavirus disease 2019 (COVID-19) pandemic demands rapid and straightforward diagnostic tools to prevent early-stage viral transmission. Although nasopharyngeal swabs are a widely used patient sample collection method for diagnosing COVID-19, using these samples for diagnosis without RNA extraction increases the risk of obtaining false-positive and -negative results. Thus, multiple purification steps are necessary, which are time-consuming, generate significant waste, and result in substantial sample loss.

Monodisperse Micro-Droplet Generation in Microfluidic Channel with Asymmetric Cross-Sectional Shape.

Micro-droplets are widely used in the fields of chemical and biological research, such as drug delivery, material synthesis, point-of-care diagnostics, and digital PCR. Droplet-based microfluidics has many advantages, such as small reagent consumption, fast reaction time, and independent control of each droplet. Therefore, various micro-droplet generation methods have been proposed, including T-junction breakup, capillary flow-focusing, planar flow-focusing, step emulsification, and high aspect (height-to-width) ratio confinement.

Hierarchical Topography with Tunable Micro- and Nanoarchitectonics for Highly Enhanced Cardiomyocyte Maturation via Multi-Scale Mechanotransduction.

Enhancing cardiomyocyte (CM) maturation by topographical cues is a critical issue in cardiac tissue engineering. Thus far, single-scale topographies with a broad range of feature shapes and dimensions have been utilized including grooves, pillars, and fibers. This study reports for the first time a hierarchical structure composed of nano-pillars (nPs) on micro-wrinkles (µWs) for effective maturation of CMs.

Square microchannel enables to focus and orient ellipsoidal Euglena gracilis cells by two-dimensional acoustic standing wave.

Flow cytometry has become an indispensable tool for counting, analyzing, and sorting large cell populations in biological research and medical practice. Unfortunately, it has limitations in the analysis of non-spherically shaped cells due to the variation of their alignment with respect to the flow direction and, hence, the optical interrogation axis, resulting in unreliable cell analysis. Here, we present a simple on-chip acoustofluidic method to fix the orientation of ellipsoidal cells and focus them into a single, aligned stream.

Inertia-Acoustophoresis Hybrid Microfluidic Device for Rapid and Efficient Cell Separation.

In this paper, we proposed an integrated microfluidic device that could demonstrate the non-contact, label-free separation of particles and cells through the combination of inertial microfluidics and acoustophoresis. The proposed device integrated two microfluidic chips which were a PDMS channel chip on top of the silicon-based acoustofluidic chip. The PDMS chip worked by prefocusing the particles/cells through inducing the inertial force of the channel structure.

Particle Focusing in a Straight Microchannel with Non-Rectangular Cross-Section.

Recently, studies on particle behavior under Newtonian and non-Newtonian fluids in microchannel have attracted considerable attention because particles and cells of interest can be manipulated and separated from biological samples without any external force. In this paper, two kinds of microchannels with non-rectangular cross-section were fabricated using basic MEMS processes (photolithography, reactive ion etching and anisotropy wet etching), plasma bonding and self-alignment between two PDMS structures. They were used to achieve the experiments for inertial and elasto-inertial particle focusing under Newtonian and non-Newtonian fluids.

A Versatile Surface Modification Method via Vapor-phase Deposited Functional Polymer Films for Biomedical Device Applications.

For last two decades, the demand for precisely engineered three-dimensional structures has increased continuously for the developments of biomaterials. With the recent advances in micro- and nano-fabrication techniques, various devices with complex surface geometries have been devised and produced in the pharmaceutical and medical fields for various biomedical applications including drug delivery and biosensors. These advanced biomaterials have been designed to mimic the natural environments of tissues more closely and to enhance the performance for their corresponding biomedical applications.

Heparin-mediated electrostatic immobilization of bFGF functional polymer films for enhanced self-renewal of human neural stem cells.

Preserving the self-renewal capability of undifferentiated human neural stem cells (hNSCs) is one of the crucial prerequisites for efficient hNSC-based regenerative medicine. Considering that basic fibroblast growth factor (bFGF) is one of the key contributing factors in maintaining the self-renewal property of hNSCs, the bioactivity and stability of bFGF in the hNSC culture should be regulated carefully. In this study, we developed a functional polymer film of poly(glycidyl methacrylate (GMA)-co-N,N-dimethylaminoethyl methacrylate (DMAEMA)) (coGD, or p(GMA-co-DMAEMA)) via initiated chemical vapor deposition (iCVD), which facilitated a stable, electrostatic adsorption of heparin and subsequent immobilization of bFGF.

Three-Dimensional Spheroid Culture on Polymer-Coated Surface Potentiate Stem Cell Functions via Enhanced Cell-Extracellular Matrix Interactions.

The aggregation of mesenchymal stem cells (MSCs) into three-dimensional (3D) spheroids has emerged as a promising therapeutic candidate for the treatment of a variety of diseases. In spite of the numerous 3D culture methods suggested recently for MSC spheroid generation, it is still elusive to fully reflect real stem cell niches; this effort majorly suffers from a lack of cell-extracellular matrix (ECM) interactions within the 3D spheroids. In this study, we develop a simple but versatile method for generating human MSC (hMSC) spheroids by culturing the cells on a functional polymer film surface, poly(2,4,6,8-tetravinyl-2,4,6,8-tetramethyl cyclotetrasiloxane) (pV4D4).

Polymer-Coated Surface as an Enzyme-Free Culture Platform to Improve Human Mesenchymal Stem Cell (hMSC) Characteristics in Extended Passaging.

For efficient therapeutic use of human mesenchymal stem cells (hMSCs), maximizing their self-renewal performance and multipotency must be fully retained. However, conventional trypsin-based cell passaging methods are known to damage the attached cells to be detached because of the inherent corrosive nature of trypsin, and continuous passaging substantially degrades the self-renewal and differentiation capacity of hMSCs. Therefore, it is imperative to secure a damage-free passaging method that supports cell growth as well as their stem cell function.

Particle Focusing under Newtonian and Viscoelastic Flow in a Straight Rhombic Microchannel.

Particle behavior in viscoelastic fluids has attracted considerable attention in recent years. In viscoelastic fluids, as opposed to Newtonian fluids, particle focusing can be simply realized in a microchannel without any external forces or complex structures. In this study, a polydimethylsiloxane (PDMS) microchannel with a rhombic cross-sectional shape was fabricated to experimentally investigate the behavior of inertial and elasto-inertial particles.