Hyperconjugation-controlled molecular conformation weakens lithium-ion solvation and stabilizes lithium metal anodes.

Tuning the solvation structure of lithium ions electrolyte engineering has proven effective for lithium metal (Li) anodes. Further advancement that bypasses the trial-and-error practice relies on the establishment of molecular design principles. Expanding the scope of our previous work on solvent fluorination, we report here an alternative design principle for non-fluorinated solvents, which potentially have reduced cost, environmental impact, and toxicity.

Self-Amplified HF Release and Polymer Deconstruction Cascades Triggered by Mechanical Force.

Hydrogen fluoride (HF) is a versatile reagent for material transformation, with applications in self-immolative polymers, remodeled siloxanes, and degradable polymers. The responsive generation of HF in materials therefore holds promise for new classes of adaptive material systems. Here, we report the mechanochemically coupled generation of HF from alkoxy--difluorocyclopropane (DFC) mechanophores derived from the addition of difluorocarbene to enol ethers.

Solvent Polarity Effects on the Mechanochemistry of Spiropyran Ring Opening.

The spiropyran mechanophore (SP) is employed as a reporter of molecular tension in a wide range of polymer matrices, but the influence of surrounding environment on the force-coupled kinetics of its ring opening has not been quantified. Here, we report single-molecule force spectroscopy studies of SP ring opening in five solvents that span normalized Reichardt solvent polarity factors () of 0.1-0.

Mechanically Triggered Polymer Deconstruction through Mechanoacid Generation and Catalytic Enol Ether Hydrolysis.

Polymers that amplify a transient external stimulus into changes in their morphology, physical state, or properties continue to be desirable targets for a range of applications. Here, we report a polymer comprising an acid-sensitive, hydrolytically unstable enol ether backbone onto which is embedded -dichlorocyclopropane (DCC) mechanophores through a single postsynthetic modification. The DCC mechanophore releases HCl in response to large forces of tension along the polymer backbone, and the acid subsequently catalyzes polymer deconstruction at the enol ether sites.

Coumarin Dimer Is an Effective Photomechanochemical AND Gate for Small-Molecule Release.

Stimulus-responsive gating of chemical reactions is of considerable practical and conceptual interest. For example, photocleavable protective groups and gating mechanophores allow the kinetics of purely thermally activated reactions to be controlled optically or by mechanical load by inducing the release of small-molecule reactants. Such release only in response to a sequential application of both stimuli (photomechanochemical gating) has not been demonstrated despite its unique expected benefits.

Mechanochemically assisted morphing of shape shifting polymers.

Morphing in creatures has inspired various synthetic polymer materials that are capable of shape shifting. The morphing of polymers generally relies on stimuli-active (typically heat and light active) units that fix the shape after a mechanical load-based shape programming. Herein, we report a strategy that uses a mechanochemically active 2,2'-bis(2-phenylindan-1,3-dione) (BPID) mechanophore as a switching unit for mechanochemical morphing.

Dynamic Enamine-one Bond Based Vitrimer via Amino-yne Click Reaction.

Here, we report the fabrication of a dynamic enamine-one bond based vitrimer through amino-yne click chemistry. In contrast to amine-acetoacetate condensation, the amino-yne click reaction yields a dynamic enamine-one motif that is composed of / (3:1) isomers and has a relatively lower activation energy (35 ± 3 kJ/mol vs 59 ± 6 kJ/mol), owing to the absence of a methyl substituent. The resulting vitrimer network has superior mechanical properties and faster dynamic exchange than that of a reference vitrimer derived from amine-acetoacetate condensation, and they are attributed to the fewer network defects and the less sterically hindered exchange reaction, respectively.

Impact of Molecular Design on Degradation Lifetimes of Degradable Imine-Based Semiconducting Polymers.

Transient electronics are a rapidly emerging field due to their potential applications in the environment and human health. Recently, a few studies have incorporated acid-labile imine bonds into polymer semiconductors to impart transience; however, understanding of the structure-degradation property relationships of these polymers is limited. In this study, we systematically design and characterize a series of fully degradable diketopyrrolopyrrole-based polymers with engineered sidechains to investigate the impact of several molecular design parameters on the degradation lifetimes of these polymers.

A Design Strategy for Intrinsically Stretchable High-Performance Polymer Semiconductors: Incorporating Conjugated Rigid Fused-Rings with Bulky Side Groups.

Strategies to improve stretchability of polymer semiconductors, such as introducing flexible conjugation-breakers or adding flexible blocks, usually result in degraded electrical properties. In this work, we propose a concept to address this limitation, by introducing conjugated rigid fused-rings with optimized bulky side groups and maintaining a conjugated polymer backbone. Specifically, we investigated two classes of rigid fused-ring systems, namely, benzene-substituted dibenzothiopheno[6,5-:6',5'-]thieno[3,2-]thiophene (Ph-DBTTT) and indacenodithiophene (IDT) systems, and identified molecules displaying optimized electrical and mechanical properties.

Oxidative regulation of the mechanical strength of a C-S bond.

The mechanical strength of individual polymer chains is believed to underlie a number of performance metrics in bulk materials, including adhesion and fracture toughness. Methods by which the intrinsic molecular strength of the constituents of a given polymeric material might be switched are therefore potentially useful both for applications in which triggered property changes are desirable, and as tests of molecular theories for bulk behaviors. Here we report that the sequential oxidation of sulfide containing polyesters () to the corresponding sulfoxide () and then sulfone () first weakens (sulfoxide), and then enhances (sulfone), the effective mechanical integrity of the polymer backbone; ∼ > .

Integrating Emerging Polymer Chemistries for the Advancement of Recyclable, Biodegradable, and Biocompatible Electronics.

Through advances in molecular design, understanding of processing parameters, and development of non-traditional device fabrication techniques, the field of wearable and implantable skin-inspired devices is rapidly growing interest in the consumer market. Like previous technological advances, economic growth and efficiency is anticipated, as these devices will enable an augmented level of interaction between humans and the environment. However, the parallel growing electronic waste that is yet to be addressed has already left an adverse impact on the environment and human health.

Distal conformational locks on ferrocene mechanophores guide reaction pathways for increased mechanochemical reactivity.

Mechanophores can be used to produce strain-dependent covalent chemical responses in polymeric materials, including stress strengthening, stress sensing and network remodelling. In general, it is desirable for mechanophores to be inert in the absence of force but highly reactive under applied tension. Metallocenes possess potentially useful combinations of force-free stability and force-coupled reactivity, but the mechanistic basis of this reactivity remains largely unexplored.

Onset of Mechanochromic Response in the High Strain Rate Uniaxial Compression of Spiropyran Embedded Silicone Elastomers.

The molecular processes that accompany dynamic mechanical response to large deformations at high strain rate (≈1000 s or higher) underlie the early stages of damage in materials, but understanding of material response in this regime is typically limited to macroscopic constitutive equations. Here, spiropyran mechanophores are embedded in very short, stress-bearing strands in silicone elastomers, and their mechanochromic response to uniaxial compression is explored in a Split Hopkinson Pressure (or Kolsky) Bar. At strain rates of 1000 s , the onset of mechanochromism occurs at lower strains, but higher stresses, than in the same materials under quasi-static loading.

Enhanced polymer mechanical degradation through mechanochemically unveiled lactonization.

The mechanical degradation of polymers is typically limited to a single chain scission per triggering chain stretching event, and the loss of stress transfer that results from the scission limits the extent of degradation that can be achieved. Here, we report that the mechanically triggered ring-opening of a [4.2.

A Latent Mechanoacid for Time-Stamped Mechanochromism and Chemical Signaling in Polymeric Materials.

Mechanically coupled proton transduction offers potential for stress-responsive polymeric materials whose properties can be switched via acid-triggered coloration, polymerization/cross-linking, or degradation. The utility of currently available mechanoacids, however, is limited by modest force-free stability or a scissile response that caps mechanoacid generation at one proton per strained polymer chain. Here, we report a new mechanoacid based on 2-methoxy-substituted -dichlorocyclopropane (MeO-DCC).

Strain-Dependent Kinetics in the Cis-to-Trans Isomerization of Azobenzene in Bulk Elastomers.

The cis-to-trans isomerization of azobenzene is accelerated in a bulk PDMS elastomer under uniaxial tension. The kinetics are cleanly described by a single-exponential first-order process ( = 2.7 × 10 s) in the absence of tension but become multiexponential under constant strains of 40-90%.

Dynamic Memory Effects in the Mechanochemistry of Cyclic Polymers.

Cyclic polymers containing multiple -dichlorocyclopropane (DCC) mechanophores along their backbone were prepared using ring expansion metathesis polymerization. The mechanochemistry of the cyclic polymers was investigated using pulsed ultrasonication. The fraction of DCC mechanophores that are activated per chain halving event (Φ) was compared to that of linear analogs.

Regiochemical Effects on Mechanophore Activation in Bulk Materials.

Mechanochromic force probes, including spiropyran derivatives, have proven to be useful in visualizing the stress/strain distribution and fracture behavior in polymeric materials. Here, we report the macroscopic response of silicone elastomers including cross-links made up of three spiropyran (SP) regioisomers. The SP derivatives SP( o), SP( m), and SP( p) are connected to the network through an identical attachment point on the indoline fragment and regioisomeric attachments ortho, meta, and para to the spirocyclic C-O bond on the benzaldehyde fragment, respectively.

Substituent Effects and Mechanism in a Mechanochemical Reaction.

We report the effect of substituents on the force-induced reactivity of a spiropyran mechanophore. Using single molecule force spectroscopy, force-rate behavior was determined for a series of spiropyran derivatives substituted with H, Br, or NO para to the breaking spirocyclic C-O bond. The force required to achieve the rate constants of ∼10 s necessary to observe transitions in the force spectroscopy experiments depends on the substituent, with the more electron withdrawing substituent requiring less force.

Multi-modal mechanophores based on cinnamate dimers.

Mechanochemistry offers exciting opportunities for molecular-level engineering of stress-responsive properties of polymers. Reactive sites, sometimes called mechanophores, have been reported to increase the material toughness, to make the material mechanochromic or optically healable. Here we show that macrocyclic cinnamate dimers combine these productive stress-responsive modes.

Mechanochemistry of Topological Complex Polymer Systems.

Although existing since the concept of macromolecules, polymer mechanochemistry is a burgeoning field which attracts great scientific interest in its ability to bias conventional reaction pathways and its potential to fabricate mechanoresponsive materials. We review here the effect of topology on the mechanical degradation of polymer chains and the activation of mechanophores in polymer backbones. The chapter focuses on both experimental and theoretical work carried out in the past 70 years.

Mechanical Activation of Mechanophore Enhanced by Strong Hydrogen Bonding Interactions.

A mechanically active spiropyran (SP) mechanophore is incorporated into the backbone of prepolymer which is further end-capped with ureidopyrimidinone (UPy) or urethane. Strong mechanochromic reaction of SP arises in the bulk films of UPy containing materials whereas much weaker activation occurs in urethane containing counterparts, coincident with their stress-strain responses. The difference in the magnitudes of supramolecular interactions leads to different degrees of chain orientation and strain induced crystallization (SIC) in the bulk and consequently distinct capabilities to transfer the load to the mechanophores.