To enable rear illumination (e.g., TIRF), single-particle fluorescence microscopy, and scanning tunneling microscopy (STM) on the same nanoparticle sample, we investigate the smoothness limit and the thickness limit of template-stripped gold films made with a simple room-temperature deposition protocol ranging from 1 to 200 pm/s on four common substrates: mica, fused silica, silicon, and quartz.
View Article and Find Full Text PDFCarbon dots are remarkable nanomaterials with many applications, but the sources of their emission are still uncertain. Carbon dots exhibit complex behaviors such as excitation-dependent emission due to their heterogeneous composition and structure. Most studies have been carried out on the ensemble level, where sample heterogeneity remains hidden.
View Article and Find Full Text PDFPlasmon-coupled circular dichroism enables chiral molecule detection by inducing circular dichroism at the plasmon resonance through interactions with a plasmonic sensor. Coupled nanoparticles offer potentially higher sensitivities due to stronger plasmonic fields at the junctions. However, ensemble-level sensitivity is limited by signal averaging, and the structural chirality of the sensor itself can obscure the molecular response.
View Article and Find Full Text PDFPlasmon-induced interfacial charge separation is a promising way to efficiently extract energetic carriers through direct plasmon decay. This mechanism of charge transfer has been investigated by single-particle scattering spectroscopy, which measures the homogeneous plasmon line width. The line width is broadened by charge transfer, generally known as chemical interface damping.
View Article and Find Full Text PDFThe physico-chemical properties of 'bottom-up' carbon dots synthesized from small molecules feature both generalities, such as sp-networked carbon and core-surface energy transfer, and heterogeneities, due to the unpredictable location of heteroatoms and often non-crystalline structure. Here we focus our review on three aspects of these systems: (1) coupling characterization with bottom-up synthesis to identify and remove confounding byproducts such as small molecules or hydrogen-rich polymers; (2) single-particle characterization to obtain unambiguous information on carbon dots and highlight the distribution of properties around the ensemble average; (3) electronic structure of carbon dots and how it can help elucidate the origin of important properties such as optical absorption and fluorescence from a heterogeneous ensemble of carbon dots.
View Article and Find Full Text PDFHere we study the controlled growth of ultrathin molybdenum dioxide (MoO) flakes, a metallic analogue of the widely studied transition metal dichalcogenide MoS. This study demonstrates the growth of three distinct MoO polymorphs (monoclinic, tetragonal, and a newly identified hexagonal phase) using physical vapor deposition. Comprehensive characterization through atomic force microscopy, Raman spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy confirms their unique structures and validates the newly observed hexagonal polymorph, which is also supported through simulations.
View Article and Find Full Text PDFWe demonstrate distinctive structural colors within a small footprint by using a short chain of nanospheres. Rather than using high-index materials like Si ( ∼ 4), which ensure strong modal confinement, TiO is employed. TiO has an intermediate index ( ∼ 2), promoting stronger modal coupling between the magnetic dipoles of each particle.
View Article and Find Full Text PDFThe lack of a detailed mechanistic understanding for plasmon-mediated charge transfer at metal-semiconductor interfaces severely limits the design of efficient photovoltaic and photocatalytic devices. A major remaining question is the relative contribution from indirect transfer of hot electrons generated by plasmon decay in the metal to the semiconductor compared to direct metal-to-semiconductor interfacial charge transfer. Here, we demonstrate an overall electron transfer efficiency of 44 ± 3% from gold nanorods to titanium oxide shells when excited on resonance.
View Article and Find Full Text PDFA major challenge in the "bottom-up" solvothermal synthesis of carbon dots (CDs) is the removal of small-molecule byproducts, noncarbonized polyamides, or other impurities that confound the optical properties. In previously reported benzene diamine-based CDs, the observed fluorescence signal already has been shown to arise from free small molecules, not from nanosized carbonized dots. Here we have unambiguously identified the small-molecule species in the synthesis of CDs starting with several isomers of benzene diamine by directly matching their NMR, mass spectrometry, and optical data with commercially available small organic molecules.
View Article and Find Full Text PDFJ Phys Chem Lett
September 2023
The hybridization of plasmonic energy and charge donors with polymeric acceptors is a possible means to overcome fast internal relaxation that limits potential photocatalytic applications for plasmonic nanomaterials. Polyaniline (PANI) readily hybridizes onto gold nanorods (AuNRs) and has been used for the sensitive monitoring of local refractive index changes. Here, we use single-particle spectroscopy to quantify a previously unreported plasmon damping mechanism in AuNR-PANI hybrids while actively tuning the PANI chemical structure.
View Article and Find Full Text PDFPlasmonic photocatalysis has attracted interest for its potential to generate energy-efficient reactions, but ultrafast internal conversion limits efficient plasmon-based chemistry. Resonance energy transfer (RET) to surface adsorbates offers a way to outcompete internal conversion pathways and also eliminate the need for sacrificial counter-reactions. Herein, we demonstrate RET between methylene blue (MB) and gold nanorods (AuNRs) using single-particle spectroelectrochemistry.
View Article and Find Full Text PDFJ Phys Chem C Nanomater Interfaces
August 2023
Ultrafast optical microscopy, generally employed by incorporating ultrafast laser pulses into microscopes, can provide spatially resolved mechanistic insight into scientific problems ranging from hot carrier dynamics to biological imaging. This Review discusses the progress in different ultrafast microscopy techniques, with a focus on transient absorption and two-dimensional microscopy. We review the underlying principles of these techniques and discuss their respective advantages and applicability to different scientific questions.
View Article and Find Full Text PDFControl of interparticle interactions in terms of their direction and strength highly relies on the use of anisotropic ligand grafting on nanoparticle (NP) building blocks. We report a ligand deficiency exchange strategy to achieve site-specific polymer grafting of gold nanorods (AuNRs). Patchy AuNRs with controllable surface coverage can be obtained during ligand exchange with a hydrophobic polystyrene ligand and an amphiphilic surfactant while adjusting the ligand concentration () and solvent condition ( in dimethylformamide).
View Article and Find Full Text PDFReactive hot spots on plasmonic nanoparticles have attracted attention for photocatalysis as they allow for efficient catalyst design. While sharp tips have been identified as optimal features for field enhancement and hot electron generation, the locations of catalytically promising d-band holes are less clear. Here we exploit d-band hole-enhanced dissolution of gold nanorods as a model reaction to locate reactive hot spots produced from direct interband transitions, while the role of the plasmon is to follow the reaction optically in real time.
View Article and Find Full Text PDFPlasmonic nanoantennas have considerably stronger polarization-dependent optical properties than their molecular counterparts, inspiring photonic platforms for enhancing molecular dichroism and providing fundamental insight into light-matter interactions. One such insight is that even achiral nanoparticles can yield strong optical activity when they are asymmetrically illuminated from a single oblique angle instead of evenly illuminated. This effect, called extrinsic chirality, results from the overall chirality of the experimental geometry and strongly depends on the orientation of the incident light.
View Article and Find Full Text PDFThe performance of photocatalysts and photovoltaic devices can be enhanced by energetic charge carriers produced from plasmon decay, and the lifetime of these energetic carriers greatly affects overall efficiencies. Although hot electron lifetimes in plasmonic gold nanoparticles have been investigated, hot hole lifetimes have not been as thoroughly studied in plasmonic systems. Here, we demonstrate time-resolved emission upconversion microscopy and use it to resolve the lifetime and energy-dependent cooling of -band holes formed in gold nanoparticles by plasmon excitation and by following plasmon decay into interband and then intraband electron-hole pairs.
View Article and Find Full Text PDFAlthough photothermal imaging was originally designed to detect individual molecules that do not emit or small nanoparticles that do not scatter, the technique is now being applied to image and spectroscopically characterize larger and more sophisticated nanoparticle structures that scatter light strongly. Extending photothermal measurements into this regime, however, requires revisiting fundamental assumptions made in the interpretation of the signal. Herein, we present a theoretical analysis of the wavelength-resolved photothermal image and its extension to the large particle scattering regime, where we find the photothermal signal to inherit a nonlinear dependence upon pump intensity, together with a contraction of the full-width-at-half-maximum of its point spread function.
View Article and Find Full Text PDFProc Natl Acad Sci U S A
January 2023
Solvated electrons are powerful reducing agents capable of driving some of the most energetically expensive reduction reactions. Their generation under mild and sustainable conditions remains challenging though. Using near-ultraviolet irradiation under low-intensity one-photon conditions coupled with electrochemical and optical detection, we show that the yield of solvated electrons in water is increased more than 10 times for nanoparticle-decorated electrodes compared to smooth silver electrodes.
View Article and Find Full Text PDFJ Phys Chem Lett
January 2023
Single-particle spectroelectrochemistry provides optical insight into understanding physical and chemical changes occurring on the nanoscale. While changes in dark-field scattering during electrochemical charging are well understood, changes to the photoluminescence of plasmonic nanoparticles under similar conditions are less studied. Here, we use correlated single-particle photoluminescence and dark-field scattering to compare their plasmon modulation at applied potentials.
View Article and Find Full Text PDFUnderstanding the nature of hot carrier pathways following surface plasmon excitation of heterometallic nanostructures and their mechanistic prevalence during photoelectrochemical oxidation of complex hydrocarbons, such as ethanol, remains challenging. This work studies the fate of carriers from Au nanorods before and after the presence of reductively photodeposited Pd at the single-particle level using scattering and emission spectroscopy, along with ensemble photoelectrochemical methods. A sub-2 nm epitaxial Pd shell was reductively grown onto colloidal Au nanorods via hot carriers generated from surface plasmon resonance excitation in the presence of [PdCl].
View Article and Find Full Text PDFNanotechnology
July 2022
Transitioning plasmonic metasurfaces into practical, low-cost applications requires meta-atom designs that focus on ease of manufacturability and a robustness with respect to structural imperfections and nonideal substrates. It also requires the use of inexpensive, earth-abundant metals such as Al for plasmonic properties. In this study, we focus on combining two aspects of plasmonic metasurfaces-visible coloration and Fano resonances-in a morphology amenable to scalable manufacturing.
View Article and Find Full Text PDFJ Chem Phys
February 2022
Plasmon-induced charge transfer has been studied for the development of plasmonic photodiodes and solar cells. There are two mechanisms by which a plasmonic nanoparticle can transfer charge to an adjacent material: indirect transfer following plasmon decay and direct transfer as a way of plasmon decay. Using single-particle dark-field scattering and photoluminescence imaging and spectroscopy of gold nanorods on various substrates, we identify linewidth broadening and photoluminescence quantum yield quenching as key spectroscopic signatures that are quantitatively related to plasmon-induced interfacial charge transfer.
View Article and Find Full Text PDFPhotothermal heating of nanoparticles has applications in nanomedicine, photocatalysis, photoelectrochemistry, and data storage, but accurate measurements of temperature at the nanoparticle surface are lacking. Here we demonstrate progress toward a super-resolution DNA nanothermometry technique capable of reporting the surface temperature on single plasmonic nanoparticles. Gold nanoparticles are functionalized with double-stranded DNA, and the extent of DNA denaturation under heating conditions serves as a reporter of temperature.
View Article and Find Full Text PDF