Bridging spectroscopy and advanced molecular orientation analysis with new 4＋ angle polarization toolbox in Quasar.

Anisotropy plays a critical role in governing the mechanical, thermal, electrical, magnetic, and optical properties of materials, influencing their behavior across diverse applications. Probing and quantifying this directional dependence is crucial for advancing materials science and biomedical research, as it provides a deeper understanding of structural orientations at the molecular level, encompassing both scientific and industrial benefits. This study introduces the "4＋ Angle Polarization" widget, an innovative extension to the open-source Quasar platform (https://quasar.

Infrared Absorption of Laser Patterned Sapphire AlO for Radiative Cooling.

The reflectance () of linear and circular micro-gratings on c-plane sapphire AlO ablated by a femtosecond (fs) laser were spectrally characterised for thermal emission ∝(1-R) in the mid-to-far infrared (IR) spectral range. An IR camera was used to determine the blackbody radiation temperature from laser-patterned regions, which showed (3-6)% larger emissivity dependent on the grating pattern. The azimuthal emission curve closely followed the Lambertian angular profile ∝cosθa at the 7.

Exploring Broad-Spectrum Antimicrobial Nanotopographies: Implications for Bactericidal, Antifungal, and Virucidal Surface Design.

Inspired by the natural defense strategies of insect wings and plant leaves, nanostructured surfaces have emerged as a promising tool in various fields, including engineering, biomedical sciences, and materials science, to combat bacterial contamination and disrupt biofilm formation. However, the development of effective antimicrobial surfaces against fungal and viral pathogens presents distinct challenges, necessitating tailored approaches. Here, we aimed to review the recent advancements of the use of nanostructured surfaces to combat microbial contamination, particularly focusing on their mechano-bactericidal and antifungal properties, as well as their potential in mitigating viral transmission.

Strong Polarization-Tuned Optical Nonlinearity Via Femtosecond-Laser Plasmonic Nanolithography in Lithium Niobate.

Despite the advantages of lithium niobate (LN)-based photonic integration platforms in various applications, the inherently weak third-order nonlinear optical response of conventional materials limits the miniaturization and energy efficiency of nonlinear optical devices in compact optical systems. Localized surface plasmons (LSPs) provide a promising solution to this miniaturization challenge by confining and enhancing light fields at deep subwavelength scales. However, due to nanofabrication limitations, strongly coupled single-crystal LN-LSP structures have yet to be realized.

Adaptations of K 12 to Synchrotron Sourced THz Radiation.

The biological effects of electromagnetic field (EMF) irradiation in the terahertz (THz) range remain ambiguous, despite numerous studies that have been conducted. In this paper, the metabolic response of K 12 to EMF irradiation was examined using a 1.0 W m incident synchrotron source (SS) in the range of 0.

Roadmap on computational methods in optical imaging and holography [invited].

Unlabelled: Computational methods have been established as cornerstones in optical imaging and holography in recent years. Every year, the dependence of optical imaging and holography on computational methods is increasing significantly to the extent that optical methods and components are being completely and efficiently replaced with computational methods at low cost. This roadmap reviews the current scenario in four major areas namely incoherent digital holography, quantitative phase imaging, imaging through scattering layers, and super-resolution imaging.

Optical Fiber Probe with Integrated Micro-Optical Filter for Raman and Surface-Enhanced Raman Scattering Sensing.

Optical fiber Raman and surface-enhanced Raman scattering (SERS) probes hold great promise for in vivo biosensing and in situ monitoring of hostile environments. However, the silica Raman scattering background generated within the optical fiber increases in proportion to the length of the fiber, and it can swamp the signal from the target analyte. While filtering can be applied at the distal end of the fiber, the use of bulk optical elements has limited probe miniaturization to a diameter of 600 µm, which in turn limits the potential applications.

Ultrafast Laser Manipulation of In-Lattice Plasmonic Nanoparticles.

Plasmonic nanoparticles enable manipulation and enhancement of light fields at deep subwavelength scales, leading to structures and devices for diverse applications in optics. Despite hybrid plasmonic materials display remarkable optical properties due to interactions between components in nanoproximity, scalable production of plasmonic nanostructures within a single-crystalline matrix to achieve an ideal plasmon-crystal interface remains challenging. Here, a novel approach is presented to realize efficient manipulation of in-lattice plasmonic nanoparticles.

Polarimeters for the Detection of Anisotropy from Reflectance.

Polarimetry is used to determine the Stokes parameters of a laser beam. Once all four S0,1,2,3 parameters are determined, the state of polarisation is established. Upon reflection of a laser beam with the defined polarisation state, the directly measured parameters can be used to determine the optical properties of the surface, which modify the -state upon reflection.

Extending the Depth of Focus of an Infrared Microscope Using a Binary Axicon Fabricated on Barium Fluoride.

Axial resolution is one of the most important characteristics of a microscope. In all microscopes, a high axial resolution is desired in order to discriminate information efficiently along the longitudinal direction. However, when studying thick samples that do not contain laterally overlapping information, a low axial resolution is desirable, as information from multiple planes can be recorded simultaneously from a single camera shot instead of plane-by-plane mechanical refocusing.

Single femtosecond pulse writing of a bifocal lens.

In this Letter, a method for the fabrication of bifocal lenses is presented by combining surface ablation and bulk modification in a single laser exposure followed by the wet etching processing step. The intensity of a single femtosecond laser pulse was modulated axially into two foci with a designed computer-generated hologram (CGH). Such pulse simultaneously induced an ablation region on the surface and a modified volume inside the fused silica.

Fraxicon for Optical Applications with Aperture ∼1 mm: Characterisation Study.

Emerging applications of optical technologies are driving the development of miniaturised light sources, which in turn require the fabrication of matching micro-optical elements with sub-1 mm cross-sections and high optical quality. This is particularly challenging for spatially constrained biomedical applications where reduced dimensionality is required, such as endoscopy, optogenetics, or optical implants. Planarisation of a lens by the Fresnel lens approach was adapted for a conical lens (axicon) and was made by direct femtosecond 780 nm/100 fs laser writing in the SZ2080™ polymer with a photo-initiator.

Genetic Transformation of Plasmid DNA into Using High Frequency Electromagnetic Energy.

We present a novel technique of genetic transformation of bacterial cells mediated by high frequency electromagnetic energy (HF EME). Plasmid DNA, pGLO (5.4 kb), was successfully transformed into JM109 cells after exposure to 18 GHz irradiation at a power density between 5.

Teeth Microcracks Research: Towards Multi-Modal Imaging.

This perspective is an overview of the recent advances in teeth microcrack (MC) research, where there is a clear tendency towards a shift from two-dimensional (2D) to three-dimensional (3D) examination techniques, enhanced with artificial intelligence models for data processing and image acquisition. X-ray micro-computed tomography combined with machine learning allows 3D characterization of all spatially resolved cracks, despite the locations within the tooth in which they begin and extend, and the arrangement of MCs and their structural properties. With photoluminescence and micro-/nano-Raman spectroscopy, optical properties and chemical and elemental composition of the material can be evaluated, thus helping to assess the structural integrity of the tooth at the MC site.

Structural and Thermal Diffusivity Analysis of an Organoferroelastic Crystal Showing Scissor-Like Two-Directional Deformation Induced by Uniaxial Compression.

A two-directional ferroelastic deformation in organic crystals is unprecedented owing to its anisotropic crystal packing, in contrast to isotropic symmetrical packing in inorganic compounds and polymers. Thereby, finding and constructing multidirectional ferroelastic deformations in organic compounds is undoubtedly complex and at once calls for deep comprehension. Herein, we demonstrate the first example of a two-directional ferroelastic deformation with a unique scissor-like movement in single crystals of -3-hexenedioic acid by the application of uniaxial compression stress.

Mechanism of Single-Cycle THz Pulse Generation and X-ray Emission: Water-Flow Irradiated by Two Ultra-Short Laser Pulses.

The interaction of two subsequent ultra-short sub-milli-Joule laser pulses with a thin water flow results in an emission of a strong single-cycle THz pulse associated with enhanced soft X-ray emission. In this paper, a chain of processes produced in this interaction is analyzed and compared with other THz generation studies. It is demonstrated that the enhanced THz and X-ray emissions are produced by an energetic electron beam accelerated in the interaction of a main laser pulse with liquid water ejected from the surface by the pre-pulse.

Linearly Polarized Infrared Spectroscopy for the Analysis of Biological Materials.

The analysis of biological samples with polarized infrared spectroscopy (p-IR) has long been a widely practiced method for the determination of sample orientation and structural properties. In contrast to earlier works, which employed this method to investigate the fundamental chemistry of biological systems, recent interests are moving toward "real-world" applications for the evaluation and diagnosis of pathological states. This focal point review provides an up-to-date synopsis of the knowledge of biological materials garnered through linearly p-IR on biomolecules, cells, and tissues.

Polarisation Control in Arrays of Microlenses and Gratings: Performance in Visible-IR Spectral Ranges.

Microlens arrays (MLAs) which are increasingly popular micro-optical elements in compact integrated optical systems were fabricated using a femtosecond direct laser write (fs-DLW) technique in the low-shrinkage SZ2080 photoresist. High-fidelity definition of 3D surfaces on IR transparent CaF substrates allowed to achieve ∼50% transmittance in the chemical fingerprinting spectral region 2-5 μm wavelengths since MLAs were only ∼10 μm high corresponding to the numerical aperture of 0.3 (the lens height is comparable with the IR wavelength).

Structure and Optical Anisotropy of Spider Scales and Silk: The Use of Chromaticity and Azimuth Colors to Optically Characterize Complex Biological Structures.

Herein, we give an overview of several less explored structural and optical characterization techniques useful for biomaterials. New insights into the structure of natural fibers such as spider silk can be gained with minimal sample preparation. Electromagnetic radiation (EMR) over a broad range of wavelengths (from X-ray to THz) provides information of the structure of the material at correspondingly different length scales (nm-to-mm).

Laser-Metal Interaction with a Pulse Shorter than the Ion Period: Ablation Threshold, Electron Emission and Ion Explosion.

The laser energy per unit surface, necessary to trigger material removal, decreases with the pulse shortening, becoming pulse-time independent in the sub-picosecond range. These pulses are shorter than the electron-to-ion energy transfer time and electronic heat conduction time, minimising the energy losses. Electrons receiving an energy larger than the threshold drag the ions off the surface in the mode of electrostatic ablation.

Optical near fields for ablation of periodic structures.

The formation mechanism of laser-induced periodic surface structures (LIPSS) has been a key to high-resolution sub-diffraction lithography or high-efficiency large-area nanotexturing. We show the evolution of LIPSS formation from a nanohole seed structure to high-spatial-frequency LIPSS by using a tightly focused and rectangular-shaped laser beam with different shape-polarization orientations. Formation of LIPSS based on light intensity distribution without invoking any long-range electromagnetic modes achieved quantitative match between modeling and experiment.

Magnetically Cured Macroradical Epoxy as Antimicrobial Coating.

The radical-bearing epoxy monomer could be the ideal embodiment of multifunctionality in epoxy-based materials. This study demonstrates the potential of macroradical epoxies as surface coating materials. A diepoxide monomer derivatized with a stable nitroxide radical is polymerized with a diamine hardener under the influence of a magnetic field.

Erratum: Femtosecond Laser Direct-Write Plasmonic Nanolithography in Dielectrics.

[This corrects the article DOI: 10.1002/smsc.202200038.

Nanoscale control of non-reciprocal ripple writing.

Femtosecond laser-induced deep-subwavelength structures have attracted much attention as a nanoscale surface texturization technique. A better understanding of the formation conditions and period control is required. Herein, we report a method of non-reciprocal writing via a tailored optical far-field exposure, where the period of ripples varies along different scanning directions, and achieve a continuous manipulation of the period from 47 to 112 nm (±4 nm) for a 100-nm-thick indium tin oxide (ITO) on glass.

Laser-Patterned Alumina Mask and Mask-Less Dry Etch of Si for Light Trapping with Photonic Crystal Structures.

Ultra-short 230 fs laser pulses of a 515 nm wavelength were tightly focused onto 700 nm focal spots and utilised in opening ∼0.4-1 μm holes in alumina AlO etch masks with a 20-50 nm thickness. Such dielectric masks simplify the fabrication of photonic crystal (PhC) light-trapping patterns for the above-Lambertian performance of high-efficiency solar cells.