Demonstrating the Efficacy of Core-Shell Silica Catalyst in Depolymerizing Polycarbonate.

Polycarbonate (PC) is a highly versatile plastic material that is extensively utilized across various industries due to its superior properties, including high impact strength and heat resistance. However, its durability presents significant challenges for recycling and waste management. Polycarbonate is a thermoplastic polymer representative of the class of condensation reaction polymers obtained from the reaction of bisphenol A (BPA) and a carbonyl source, such as phosgene or alkyl and aryl carbonate.

Gas-Phase Photocatalytic Coprocessing of CO - HO to Energy Products Promoted by the n,n-Junction InO@g-CN under VIS-Light.

Carbon dioxide capture and utilization is a strategic technology for moving away from fossil-C. The conversion of CO into fuels demands energy and hydrogen that cannot be sourced from fossil-C. Co-processing of CO and water under solar irradiation will have a key role in the long-term for carbon-recycling and energy products production.

Comparison of Milk Kefirs Obtained from Cow's, Ewe's and Goat's Milk: Antioxidant Role of Microbial-Derived Exopolysaccharides.

Different types of milk are used in the production of milk kefir, but little information is available on the release of potentially antioxidant exopolysaccharides (EPS). The aim of this study was to investigate whether the microbial dynamics and EPS release are dependent on the milk substrate. In our study, the inoculated microbial consortium was driven differently by each type of milk (cow, ewe, and goat).

Understanding the Effect of the Synthetic Method and Surface Chemistry on the Properties of CsPbBr Nanoparticles.

Over the last decade, the attractive properties of CsPbBr nanoparticles (NPs) have driven ever-increasing progress in the development of synthetic procedures to obtain high-quality NPs at high concentrations. Understanding how the properties of NPs are influenced by the composition of the reaction mixture in combination with the specific synthetic methodology is crucial, both for further elucidating the fundamental characteristics of this class of materials and for their manufacturing towards technological applications. This work aims to shed light on this aspect by synthesizing CsPbBr NPs by means of two well-assessed synthetic procedures, namely, hot injection (HI) and ligand-assisted reprecipitation (LARP) in non-polar solvents, using PbBr and CsCO as precursors in the presence of already widely investigated ligands.

Atmospheric Pressure Plasma Deposition of Hybrid Nanocomposite Coatings Containing TiO and Carbon-Based Nanomaterials.

Among the different applications of TiO, its use for the photocatalytic abatement of organic pollutants has been demonstrated particularly relevant. However, the wide band gap (3.2 eV), which requires UV irradiation for activation, and the fast electron-hole recombination rate of this n-type semiconductor limit its photocatalytic performance.

Encapsulation of MCC950 in Liposomes Decorated with Anti-Frizzled 1 Improves Drug Bioavailability and Effectiveness in Fatty Liver Disease.

Inflammasome activation plays a crucial role in the progression to more severe stages of non-alcoholic fatty liver disease (NAFLD), representing a promising therapeutic target. MCC950 is a small molecule acting as a potent and specific inhibitor of the canonical and non-canonical activation of the NLRP3 inflammasome, but its short plasmatic half-life limits its use. Herein, we report, for the first time, the encapsulation of MCC950 in poly(ethylene glycol) (PEG) liposomes (LPs) that are specifically functionalized with an antibody against Frizzled 1 (FZD1), a g-coupled protein involved in the WNT pathway and overexpressed on inflammasome-activated macrophages.

Synthesis and Characterization of SPIONs Encapsulating Polydopamine Nanoparticles and Their Test for Aqueous Cu Ion Removal.

The removal of pollutants, such as heavy metals, aromatic compounds, dyes, pesticides and pharmaceuticals, from water is still an open challenge. Many methods have been developed and exploited for the purification of water from contaminants, including photocatalytic degradation, biological treatment, adsorption and chemical precipitation. Absorption-based techniques are still considered among the most efficient and commonly used approaches thanks to their operational simplicity.

Photocatalytic Investigation of Aerosol-Assisted Atmospheric Pressure Plasma Deposited Hybrid TiO Containing Nanocomposite Coatings.

We report on the aerosol-assisted atmospheric-pressure plasma deposition onto a stainless-steel woven mesh of a thin nanocomposite coating based on TiO2 nanoparticles hosted in a hybrid organic−inorganic matrix, starting from nanoparticles dispersed in a mixture of hexamethyldisiloxane and isopropyl alcohol. The stainless-steel mesh was selected as an effective support for the possible future technological application of the coating for photocatalytically assisted water depollution. The prepared coatings were thoroughly investigated from the chemical and morphological points of view and were demonstrated to be photocatalytically active in the degradation of an organic molecule, used as a pollutant model, in water upon UV light irradiation.

TiO-based nanomaterials assisted photocatalytic treatment for virus inactivation: perspectives and applications.

The COVID 19 pandemic has demonstrated the need for urgent access to measures to contain the spread of the virus and bacteria. In this frame, the use of photocatalytic nanomaterials can be a valuable alternative to chemical disinfectants without the limitation of generating polluting by-products and with the advantage of re-usability in time. Here, on the basis of up-to-date literature reports, the use of TiO-based photocatalytic nanomaterials in disinfection will be overviewed, considering the peculiar nanocatalysts assisted inactivation mechanisms.

Life Cycle Assessment of UV-C based treatment systems for the removal of compounds of emerging concern from urban wastewater.

In the last decades particular attention is being paid to the efficient and effective removal of compounds of emerging concern (CECs) present in wastewater before their eventual reuse or disposal. Several technologies have been developed for the degradation of CECs in aqueous matrix, in this regard advanced oxidation processes (AOPs) represent a nascent technological solution developed on a laboratory scale with applications on a prototype scale. The experimental evidences have shown that AOPs processes can oxidize numerous organic compounds in a much faster and more efficient way than that of the most common disinfection processes.

NIR-Absorbing Mesoporous Silica-Coated Copper Sulphide Nanostructures for Light-to-Thermal Energy Conversion.

Plasmonic nanostructures, featuring near infrared (NIR)-absorption, are rising as efficient nanosystems for in vitro photothermal (PT) studies and in vivo PT treatment of cancer diseases. Among the different materials, new plasmonic nanostructures based on CuS nanocrystals (NCs) are emerging as valuable alternatives to Au nanorods, nanostars and nanoshells, largely exploited as NIR absorbing nanoheaters. Even though CuS plasmonic properties are not linked to geometry, the role played by their size, shape and surface chemistry is expected to be fundamental for an efficient PT process.

Peripherical thioester functionalization induces -aggregation in bithiophene-DPP films and nanoparticles.

In this work we demonstrated that the peripherical thioacetylation of a bithiophene-DPP molecule can greatly influence the solid-state properties triggering the formation of NIR emitting -aggregates in both bithiophene-DPP films and nanoparticles. The morphology and the kinetic and thermal stability of the organic nanoparticles were also investigated.

High Surface Area Mesoporous Silica Nanoparticles with Tunable Size in the Sub-Micrometer Regime: Insights on the Size and Porosity Control Mechanisms.

Mesoporous silica nanostructures (MSNs) attract high interest due to their unique and tunable physical chemical features, including high specific surface area and large pore volume, that hold a great potential in a variety of fields, i.e., adsorption, catalysis, and biomedicine.

Gold-Speckled SPION@SiO Nanoparticles Decorated with Thiocarbohydrates for ASGPR1 Targeting: Towards HCC Dual Mode Imaging Potential Applications.

Efforts are made to perform an early and accurate detection of hepatocellular carcinoma (HCC) by simultaneous exploiting multiple clinically non-invasive imaging modalities. Original nanostructures derived from the combination of different inorganic domains can be used as efficient contrast agents in multimodal imaging. Superparamagnetic iron oxide nanoparticles (SPIONs) and Au nanoparticles (NPs) possess well-established contrasting features in magnetic resonance imaging (MRI) and X-ray computed tomography (CT), respectively.

PbS Quantum Dots Decorating TiO Nanocrystals: Synthesis, Topology, and Optical Properties of the Colloidal Hybrid Architecture.

Fabrication of heterostructures by merging two or more materials in a single object. The domains at the nanoscale represent a viable strategy to purposely address materials' properties for applications in several fields such as catalysis, biomedicine, and energy conversion. In this case, solution-phase seeded growth and the hot-injection method are ingeniously combined to fabricate TiO/PbS heterostructures.

Special Issue: Application of Photoactive Nanomaterials in Degradation of Pollutants.

Photoactive nanomaterials are receiving increasing attention due to their potential application to light-driven degradation of water and gas-phase pollutants. However, to exploit the strong potential of photoactive materials and access their properties require a fine tuning of their size/shape dependent chemical-physical properties and on the ability to integrate them in photo-reactors or to deposit them on large surfaces. Therefore, the synthetic approach, as well as post-synthesis manipulation could strongly affect the final photocatalytic properties of nanomaterials.

Scalable Synthesis of Mesoporous TiO for Environmental Photocatalytic Applications.

Increasing environmental concern, related to pollution and clean energy demand, have urged the development of new smart solutions profiting from nanotechnology, including the renowned nanomaterial-assisted photocatalytic degradation of pollutants. In this framework, increasing efforts are devoted to the development of TiO-based nanomaterials with improved photocatalytic activity. A plethora of synthesis routes to obtain high quality TiO-based nanomaterials is currently available.

Surface Engineering of Gold Nanorods for Cytochrome Bioconjugation: An Effective Strategy To Preserve the Protein Structure.

The surface of gold nanorods (Au NRs) has been appropriately engineered to achieve a suitable interface for bioconjugation with horse heart cytochrome (HCc). HCc, an extensively studied and well-characterized protein, represents an ideal model for nanoparticle (NP)-protein conjugation studies because of its small size, high stability, and commercial availability. Here, the native state of the protein has been demonstrated for the first time, by means of Raman spectroscopy, to be retained upon conjugation with the anisotropic Au nanostructures, thus validating the proposed protocol as specifically suited to mostly preserve the plasmonic properties of the NRs and to retain the structure of the protein.

Interaction between the photosynthetic anoxygenic microorganism Rhodobacter sphaeroides and soluble gold compounds. From toxicity to gold nanoparticle synthesis.

Biological processes using microorganisms for nanoparticle synthesis are appealing as eco-friendly nanofactories. The response of the photosynthetic bacterium Rhodobacter sphaeroides to gold exposure and its reducing capability of Au(III) to produce stable gold nanoparticles (AuNPs), using metabolically active bacteria and quiescent biomass, is reported in this study. In the former case, bacterial cells were grown in presence of gold chloride at physiological pH.

Luminescent CdSe@ZnS nanocrystals embedded in liposomes: a cytotoxicity study in HeLa cells.

The use of fluorescent nanocrystals (NCs) as probes for bioimaging applications has emerged as an advantageous alternative to conventional organic fluorescent dyes. Therefore their toxicological evaluation and intracellular delivery are currently a primary field of research. In this work, hydrophobic and highly fluorescent CdSe@ZnS NCs were encapsulated into the lipid bilayer of liposomes by the micelle-to-vesicle transition (MVT) method.

Photo-Induced Heating in Plasmonic Nanoparticles Trapped in Thermo-Sensitive Liquid Crystals.

Thermo-sensitive liquid crystals may result, for some aspects, good host materials for plasmonic nanoparticles. In particular they are suitable to study and measure the temperature variations produced by photo-induced plasmonic joule effect in the metallic nanoparticles. Combining the properties of liquid crystals and metallic nanoparticles, allows to measure temperature variations in different ways by exploiting the optical properties of thermotropic liquid crystals: In a first attempt, by combining nematic liquid crystals and spherical metallic nanoparticles, we have predicted and measured temperature changes, under a suitable (resonant) optical illumination, by measuring the photo-thermal induced birefringence variation.

Preparation of drug-loaded small unilamellar liposomes and evaluation of their potential for the treatment of chronic respiratory diseases.

The aim of the present investigation was to evaluate the influence of liposome formulation on the ability of vesicles to penetrate a pathological mucus model obtained from COPD affected patients in order to assess the potential of such vesicles for the treatment of chronic respiratory diseases by inhalation. Therefore, Small Unilamellar Liposomes (PLAIN-LIPOSOMEs), Pluronic® F127-surface modified liposomes (PF-LIPOSOMEs) and PEG 2000PE-surface modified liposomes (PEG-LIPOSOMEs) were prepared using the micelle-to-vesicle transition (MVT) method and beclomethasone dipropionate (BDP) as model drug. The obtained liposomes showed diameters in the range of 40-65 nm, PDI values between 0.

Encapsulation of Curcumin-Loaded Liposomes for Colonic Drug Delivery in a pH-Responsive Polymer Cluster Using a pH-Driven and Organic Solvent-Free Process.

The present study aimed to develop and optimize liposome formulation for the colonic delivery of biologically active compounds. A strategy to facilitate such targeting is to formulate liposomes with a polymer coating sensitive to the pH shifts in the gastrointestinal tract. To this end, liposomes encapsulating curcumin-chosen as the biologically active compound model-and coated with the pH-responsive polymer Eudragit S100 were prepared and characterized.