Natural dielectrics for organic field effect transistors: a study on resins derived from larch, spruce and Atlas cedar Pinaceae trees.

Three Pinaceae resins originating from trees of high industrial significance-European larch, European spruce, and Atlas cedar-were examined in this work. These resins exhibited ease of processing using ethyl alcohol solutions, exceptional film formation, and great dielectric qualities with measured breakdown fields in the range of 5-7.3 MV cm.

Natural waxes from plant and animal origin as dielectrics for low-voltage organic field effect transistors.

We demonstrate in this work the practical use of naturally extracted waxes of plant and animal origin, , beeswax, carnauba wax, rice bran wax, lanolin wax, and two shellac waxes as dielectrics in organic field effect transistors (OFETs). We present a thorough characterization of their material properties, processability and film forming characteristic, surface characterization, dielectric investigation and the fabrication of field effect transistors with two classic organic semiconductors, , pentacene and fullerene C. We show that operating voltages as low as 1 V are possible for all the OFETs using blade coating as fabrication method of waxes solubilized in their appropriate solvent, chloroform or -octane.

Cellulose Nanocrystals and Rice Husk Surface Functionalization Induced by Infrared Thermal Activation.

Infrared thermal activation (IRTA) is considered an efficient approach to accelerate reaction rates. The manuscript reports the first example of application of IRTA to achieve surface functionalization of cellulose nanocrystals (CNCs) under solvent-less conditions with epoxidized linoleic acid (ELA), synthesized by enzymatic approach using CaLB (lipase B from Candida antarctica) and HO. The final goal is to enhance the hydrophobicity of cellulosic surfaces of bio-based materials, with potential application in the coating industry.

Fully biodegradable hierarchically designed high-performance nanocellulose piezo-arrays.

While piezoelectric sensing and energy-harvesting devices still largely rely on inorganic components, biocompatible and biodegradable piezoelectric materials, such as cellulose nanocrystals, might constitute optimal and sustainable building blocks for a variety of applications in electronics and transient implants. To this aim, however, effective methods are needed to position cellulose nanocrystals in large and high-performance architectures. Here, we report on scalable assemblies of cellulose nanocrystals in multilayered piezoelectric systems with exceptional response, for various application scopes.

Covalent Lysozyme Immobilization on Enzymatic Cellulose Nanocrystals.

Nanostructured materials represent promising substrates for biocatalyst immobilization and activation. Cellulose nanocrystals (CNCs), accessible from waste and/or renewable sources, are sustainable and biodegradable, show high specific surface area for anchoring a high number of enzymatic units, and high thermal and mechanical stability. In this work, we present a holistic enzyme-based approach to functional antibacterial materials by bioconjugation between the lysozyme from chicken egg white and enzymatic cellulose nanocrystals.

Pinaceae Pine Resins (Black Pine, Shore Pine, Rosin, and Baltic Amber) as Natural Dielectrics for Low Operating Voltage, Hysteresis-Free, Organic Field Effect Transistors.

Four pinaceae pine resins analyzed in this study: black pine, shore pine, Baltic amber, and rosin demonstrate excellent dielectric properties, outstanding film forming, and ease of processability from ethyl alcohol solutions. Their trap-free nature allows fabrication of virtually hysteresis-free organic field effect transistors operating in a low voltage window with excellent stability under bias stress. Such green constituents represent an excellent choice of materials for applications targeting biocompatibility and biodegradability of electronics and sensors, within the overall effort of sustainable electronics development and environmental friendliness.

Isolation of Pure Lignin and Highly Digestible Cellulose from Defatted and Steam-Exploded .

In this work, a three-step approach to isolate the main components of lignocellulosic cardoon, lignin and cellulose, was investigated. The raw defatted biomass, , after steam explosion was subjected to a mild organosolv treatment to extract soluble lignin (). Then, enzymatic hydrolysis was performed to achieve decomposition of the saccharidic portion into monosaccharides and isolate residual lignin ().

Nanocellulose for Paper and Textile Coating: The Importance of Surface Chemistry.

Nanocellulose has received enormous scientific interest for its abundance, easy manufacturing, biodegradability, and low cost. Cellulose nanocrystals (CNCs) and cellulose nanofibers (CNFs) are ideal candidates to replace plastic coating in the textile and paper industry. Thanks to their capacity to form an interconnected network kept together by hydrogen bonds, nanocelluloses perform an unprecedented strengthening action towards cellulose- and other fiber-based materials.

Kumagawa and Soxhlet Solvent Fractionation of Lignin: The Impact on the Chemical Structure.

We investigated the effects of solvent fractionation on the chemical structures of two commercial technical lignins. We compared the effect of Soxhlet and Kumagawa extraction. The aim of this work was to compare the impact of the methods and of the solvents on lignin characteristics.

Peripherical thioester functionalization induces -aggregation in bithiophene-DPP films and nanoparticles.

In this work we demonstrated that the peripherical thioacetylation of a bithiophene-DPP molecule can greatly influence the solid-state properties triggering the formation of NIR emitting -aggregates in both bithiophene-DPP films and nanoparticles. The morphology and the kinetic and thermal stability of the organic nanoparticles were also investigated.

Toward a Reversible Consolidation of Paper Materials Using Cellulose Nanocrystals.

An innovative consolidation strategy for degraded paper is presented based on the reversible application of cellulose nanocrystals as sustainable fillers to reinforce mechanical properties and resistance to further degradation. The compatibility and efficacy of the proposed consolidation treatment are assessed first on pure cellulose paper, used as a model, by reliable techniques such as field emission scanning electron microscopy, atomic force microscopy, tensile tests, X-ray powder diffraction, and Fourier transform infrared spectroscopy, evidencing the influence of the surface functionalization of nanocellulose on the consolidation and protection effects. Then, the consolidation technique is applied to real aged paper samples from (1738), demonstrating the promising potential of the suggested approach.

Reductive Amination Reaction for the Functionalization of Cellulose Nanocrystals.

Cellulose nanocrystals (CNCs) represent intriguing biopolymeric nanocrystalline materials, that are biocompatible, sustainable and renewable, can be chemically functionalized and are endowed with exceptional mechanical properties. Recently, studies have been performed to prepare CNCs with extraordinary photophysical properties, also by means of their functionalization with organic light-emitting fluorophores. In this paper, we used the reductive amination reaction to chemically bind 4-(1-pyrenyl)butanamine selectively to the reducing termini of sulfated or neutral CNCs (S_CNC and N_CNC) obtained from sulfuric acid or hydrochloric acid hydrolysis.

Nanocellulose/Fullerene Hybrid Films Assembled at the Air/Water Interface as Promising Functional Materials for Photo-electrocatalysis.

Cellulose nanomaterials have been widely investigated in the last decade, unveiling attractive properties for emerging applications. The ability of sulfated cellulose nanocrystals (CNCs) to guide the supramolecular organization of amphiphilic fullerene derivatives at the air/water interface has been recently highlighted. Here, we further investigated the assembly of Langmuir hybrid films that are based on the electrostatic interaction between cationic fulleropyrrolidines deposited at the air/water interface and anionic CNCs dispersed in the subphase, assessing the influence of additional negatively charged species that are dissolved in the water phase.

Stability of Selected Hydrogen Bonded Semiconductors in Organic Electronic Devices.

The electronics era is flourishing and morphing itself into Internet of Everything, IoE. At the same time, questions arise on the issue of electronic materials employed: especially their natural availability and low-cost fabrication, their functional stability in devices, and finally their desired biodegradation at the end of their life cycle. Hydrogen bonded pigments and natural dyes like indigo, anthraquinone and acridone are not only biodegradable and of bio-origin but also have functionality robustness and offer versatility in designing electronics and sensors components.

Tailoring water stability of cellulose nanopaper by surface functionalization.

Cellulose nanopaper (CNP) features appealing properties, including transparency, flatness, a low thermal expansion coefficient and thermal stability, often outperforming conventional paper. However, free-standing crystalline cellulose films usually swell in water or upon moisture sorption, compromising part of their outstanding properties. This remains a major problem whenever working in a water environment is required.

Pd-Catalyzed Thiophene-Aryl Coupling Reaction via C-H Bond Activation in Deep Eutectic Solvents.

Direct arylation of 5-octylthieno[3,4-c]pyrrole-4,6-dione with a series of functionalized aryl iodides via C-H bond activation is demonstrated in a deep eutectic solvent made of choline chloride and urea in non-anhydrous conditions and without exclusion of air. This is the first demonstration of a thiophene-aryl coupling via direct arylation in deep eutectic solvents.

Synthetic Antenna Functioning As Light Harvester in the Whole Visible Region for Enhanced Hybrid Photosynthetic Reaction Centers.

The photosynthetic reaction center (RC) from the Rhodobacter sphaeroides bacterium has been covalently bioconjugated with a NIR-emitting fluorophore (AE800) whose synthesis was specifically tailored to act as artificial antenna harvesting light in the entire visible region. AE800 has a broad absorption spectrum with peaks centered in the absorption gaps of the RC and its emission overlaps the most intense RC absorption bands, ensuring a consistent increase of the protein optical cross section. The covalent hybrid AE800-RC is stable and fully functional.

Discrimination of mercuric ions in piezoelectric sensors with a conjugated polymeric active layer.

The synthetic conjugated poly(1,4-arylene-2,5-thienylene) containing benzo[c][2,1,3]thiadiazole monomeric units (Bz-PAT) is proposed as active layer for the selective detection of mercuric ions. The Bz-PAT polymer chemical structure induces the formation of a disordered film with numerous vacancies and the size of these defects could be exploited for a reversible trapping of mercuric ions. For these reasons the Langmuir-Schaefer (LS) deposition method has been employed for transferring Bz-PAT layers with the desired accurate bi-dimensional organization control of the layer and with a high control of the deposition parameters.

Electrowetting of nitro-functionalized oligoarylene thiols self-assembled on polycrystalline gold.

Four linear terarylene molecules (i) 4-nitro-terphenyl-4″-methanethiol (NTM), (ii) 4-nitro-terphenyl-3″,5″-dimethanethiol (NTD), (iii) ([1,1';4',1″] terphenyl-3,5-diyl)methanethiol (TM), and (iv) ([1,1';4',1″] terphenyl-3,5-diyl)dimethanethiol (TD) have been synthesized and their self-assembled monolayers (SAMs) have been obtained on polycrystalline gold. NTM and NTD SAMs have been characterized by X-ray photoelectron spectroscopy, Kelvin probe measurements, electrochemistry, and contact angle measurements. The terminal nitro group (-NO2) is irreversibly reduced to hydroxylamine (-NHOH), which can be reversibly turned into nitroso group (-NO).

Langmuir-Schaefer films for aligned carbon nanotubes functionalized with a conjugate polymer and photoelectrochemical response enhancement.

Single-walled carbon nanotubes (SWCNTs) were suspended in 1,2-dichloroethane by noncovalent functionalization with a low-band-gap conjugated polymer 1 alternating dialkoxyphenylene-bisthiophene units with benzo[c][2,1,3]thiadiazole monomeric units. The suspended 1/SWCNT blend was transferred onto different solid substrates by the Langmuir-Schaefer deposition method, resulting in films with a high percentage of aligned nanotubes. Photoelectrochemical characterization of 1/SWCNT thin films on indium-tin oxide showed the benefits of SWCNT alignment for photoconversion efficiency.

Enhancing the light harvesting capability of a photosynthetic reaction center by a tailored molecular fluorophore.

Light machine: The simplest photosynthetic protein able to convert sunlight into other energy forms is covalently functionalized with a tailored organic dye to obtain a fully functional hybrid complex that outperforms the natural system in light harvesting and conversion ability.

Tailoring density and optical and thermal behavior of gold surfaces and nanoparticles exploiting aromatic dithiols.

Self-assembled monolayers (SAMs) derived of 4-methoxy-terphenyl-3'',5''-dimethanethiol (TPDMT) and 4-methoxyterphenyl-4''-methanethiol (TPMT) have been prepared by chemisorption from solution onto gold thin films and nanoparticles. The SAMs have been characterized by spectroscopic ellipsometry, Raman spectroscopy and atomic force microscopy to determine their optical properties, namely the refractive index and extinction coefficient, in an extended spectral range of 0.75-6.

Synthesis of S-acetyl oligoarylenedithiols via Suzuki-Miyaura cross-coupling.

Oligoarylenes with three or four aromatic rings, bearing two S-acetylated mercaptomethyl groups in 1,3 position on one end of the polyaromatic system and presenting various functionalities on the other terminal ring, have been synthesized by the Suzuki-Miyaura cross-coupling reaction. The use of palladium complexes with a Buchwald's phosphine as ligand allowed us to perform this coupling reaction also in the presence of benzylic S-acetyl-protected functionalities on the aromatic halide. The obtained oligoarylenes are potential novel candidates for the generation of self-assembling monolayers on metal substrates.