Magnetic in situ determination of surface coordination motifs by utilizing the degree of particle agglomeration.

Most analytical techniques used to study the surface chemical properties of superparamagnetic iron oxide nanoparticles (SPIONs) are barely suitable for in situ investigations in liquids, where SPIONs are mostly applied for hyperthermia therapy, diagnostic biosensing, magnetic particle imaging or water purification. Magnetic particle spectroscopy (MPS) can resolve changes in magnetic interactions of SPIONs within seconds at ambient conditions. Herein, we show that by adding mono- and divalent cations to citric acid capped SPIONs, the degree of agglomeration can be utilized to study the selectivity of cations towards surface coordination motifs via MPS.

Tailored Solution-Based N-heterotriangulene Thin Films: Unravelling the Self-Assembly.

The ability of a series of bridged triarylamines, so-called N-heterotriangulenes, to form multilayer-type 2D-extended films via a solution-based processing method was examined using complementary microscopic techniques. We found that the long-range order, crystallinity, and layer thickness decisively depend on the nature of the substituents attached to the polycyclic backbone. Owing to their flat core unit, compounds exhibiting a carbonyl unit at the bridge position provide a superior building block as compared to thioketone-bridged derivatives.

Preparation of Graphene-Supported Microwell Liquid Cells for In Situ Transmission Electron Microscopy.

The fabrication and preparation of graphene-supported microwell liquid cells (GSMLCs) for in situ electron microscopy is presented in a stepwise protocol. The versatility of the GSMLCs is demonstrated in the context of a study about etching and growth dynamics of gold nanostructures from a HAuCl4 precursor solution. GSMLCs combine the advantages of conventional silicon- and graphene-based liquid cells by offering reproducible well depths together with facile cell manufacturing and handling of the specimen under investigation.

Unravelling the Mechanisms of Gold-Silver Core-Shell Nanostructure Formation by in Situ TEM Using an Advanced Liquid Cell Design.

The growth of silver shells on gold nanorods is investigated by in situ liquid cell transmission electron microscopy using an advanced liquid cell architecture. The design is based on microwells in which the liquid is confined between a thin SiN membrane on one side and a few-layer graphene cap on the other side. A well-defined specimen thickness and an ultraflat cell top allow for the application of high-resolution TEM and the application of analytical TEM techniques on the same sample.

Hierachical Ni@Fe2O3 superparticles through epitaxial growth of γ-Fe2O3 nanorods on in situ formed Ni nanoplates.

One endeavour of nanochemistry is the bottom-up synthesis of functional mesoscale structures from basic building blocks. We report a one-pot wet chemical synthesis of Ni@γ-Fe2O3 superparticles containing Ni cores densely covered with highly oriented γ-Fe2O3 (maghemite) nanorods (NRs) by controlled reduction/decomposition of nickel acetate (Ni(ac)2) and Fe(CO)5. Automated diffraction tomography (ADT) of the Ni-Fe2O3 interface in combination with Mössbauer spectroscopy showed that selective and oriented growth of the γ-Fe2O3 nanorods on the Ni core is facilitated through the formation of a Fe0.

Adsorption of the herbicide 4-chloro-2-methylphenoxyacetic acid (MCPA) by goethite.

Interaction between the goethite surface and 4-chloro-2-methylphenoxyacetic acid (MCPA) herbicide was studied using density functional theory (DFT) calculations combined with molecular dynamics (MD). The important step made here lies in the use of a periodic DFT method enabling the study of a mineral surface of different protonation states, in strong contrast with previous molecular modeling studies limited to single protonation state corresponding to the point of zero charge. Different surface OH groups and MCPA proton states were used to mimic the strong effects of pH on the outer- and inner-sphere surface complexes that are theoretically possible, together with their binding energies, and their bond lengths.

Microstructures in shells of the freshwater gastropod Viviparus viviparus: a potential sensor for temperature change?

Mollusk shells contain a plethora of information on past climate variability. However, only a limited toolkit is currently available to reconstruct such data from the shells. The environmental data of some proxies (e.

Controlled synthesis of linear and branched Au@ZnO hybrid nanocrystals and their photocatalytic properties.

Colloidal Au@ZnO hybrid nanocrystals with linear and branched shape were synthesized. The number of ZnO domains on the Au seeds can be controlled by the solvent mixture. Imidazole-functionalized Au@ZnO hybrid nanocrystals were soluble in water and exhibited a greatly enhanced photocatalytic activity compared to ZnO nanocrystals.

Hybrid chalcogenide nanoparticles: 2D-WS2 nanocrystals inside nested WS2 fullerenes.

The MOCVD assisted formation of nested WS2 inorganic fullerenes (IF-WS2) was performed by enhancing surface diffusion with iodine, and fullerene growth was monitored by taking TEM snapshots of intermediate products. The internal structure of the core-shell nanoparticles was studied using scanning electron microscopy (SEM) after cross-cutting with a focused ion beam (FIB). Lamellar reaction intermediates were found occluded in the fullerene particles.

Graphene-type sheets of Nb(1-x)W(x)S2: synthesis and in situ functionalization.

Enlightened by the discovery of graphenes, a variety of inorganic analogues have been synthesized and characterized in recent years. Solvated Nb1-xWxS2 analogues of graphene-type sheets were prepared by lithiation and exfoliation of multistacked Nb1-xWxS2 coin roll nanowires (CRNWs), followed by in situ functionalization with gold nanoparticles to synthesize gold-loaded Nb1-xWxS2/Au nanocomposites. The Nb1-xWxS2 nanosheets and the corresponding Nb1-xWxS2/Au nanocomposites were characterized by high resolution electron microscopy (HRTEM), energy-dispersive X-ray spectroscopy (EDX), scanning transmission electron microscopy (STEM), dynamic light scattering (DLS) and scanning force microscopy (AFM).

Ni@Fe₂O₃ heterodimers: controlled synthesis and magnetically recyclable catalytic application for dehalogenation reactions.

Ni@Fe(2)O(3) heterodimer nanoparticles (NPs) were synthesized by thermal decomposition of organometallic reactants. After functionalization, these Ni@Fe(2)O(3) heterodimers became water soluble. The pristine heterodimeric NPs were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Mössbauer spectroscopy and magnetic susceptibility measurements.

Unexpected multivalent display of proteins by temperature triggered self-assembly of elastin-like polypeptide block copolymers.

We report herein the unexpected temperature triggered self-assembly of proteins fused to thermally responsive elastin-like polypeptides (ELPs) into spherical micelles. A set of six ELP block copolymers (ELP(BC)) differing in hydrophilic and hydrophobic block lengths were genetically fused to two single domain proteins, thioredoxin (Trx) and a fibronectin type III domain (Fn3) that binds the α(v)β(3) integrin. The self-assembly of these protein-ELP(BC) fusions as a function of temperature was investigated by UV spectroscopy, light scattering, and cryo-TEM.

Wet chemical synthesis and a combined X-ray and Mössbauer study of the formation of FeSb2 nanoparticles.

Understanding how solids form is a challenging task, and few strategies allow for elucidation of reaction pathways that are useful for designing the synthesis of solids. Here, we report a powerful solution-mediated approach for formation of nanocrystals of the thermoelectrically promising FeSb(2) that uses activated metal nanoparticles as precursors. The small particle size of the reactants ensures minimum diffusion paths, low activation barriers, and low reaction temperatures, thereby eliminating solid-solid diffusion as the rate-limiting step in conventional bulk-scale solid-state synthesis.

Hydrogen peroxide sensors for cellular imaging based on horse radish peroxidase reconstituted on polymer-functionalized TiO₂ nanorods.

We describe the reconstitution of apo-horse radish peroxidase (apo-HRP) onto TiO(2) nanorods functionalized with a multifunctional polymer. After functionalization, the horse radish peroxidase (HRP) functionalized TiO(2) nanorods were well dispersible in aqueous solution, catalytically active and biocompatible, and they could be used to quantify and image H(2)O(2) which is a harmful secondary product of cellular metabolism. The shape, size and structure of TiO(2) nanorods (anatase) were analyzed by transmission electron microscopy (TEM), high resolution TEM (HRTEM), electron diffraction (ED) and X-ray diffraction (XRD).

Controlling phase formation in solids: rational synthesis of phase separated Co@Fe2O3 heteroparticles and CoFe2O4 nanoparticles.

A wet chemical approach from organometallic reactants allowed the targeted synthesis of Co@Fe(2)O(3) heterodimer and CoFe(2)O(4) ferrite nanoparticles. They display magnetic properties that are useful for magnetic MRI detection.

Nanoparticle vesicles through self assembly of cyclodextrin- and adamantyl-modified silica.

Stable nanoparticle vesicles were for the first time prepared from adamantyl- and cyclodextrin (CD)-modified silica nanoparticles forming host-guest interactions in aqueous solution. Adamantyl-functionalized nanoparticles were obtained from thiol-isocyanate reaction of thiol-modified nanoparticles with 1-adamantyl isocyanate. The CD modified silica particles were isolated from a reaction of mono-6-para-toluenesulfonyl-β-cyclodextrin with the thiol functionalized silica under microwave conditions in basic media.

Soluble IF-ReS2 nanoparticles by surface functionalization with terpyridine ligands.

A major drawback in the application of layered chalcogenide nanoparticles/tubes is their inertness to chemical and biological modification and functionalization. Their potential use in composite materials might be greatly enhanced by improving the chalcogenide/matrix interface bonding. A novel modification strategy for layered chalcogenide nanoparticles based on the chalcophilic affinity of metals and the chelating terpyridine is reported.

IVIVC for fenofibrate immediate release tablets using solubility and permeability as in vitro predictors for pharmacokinetics.

The goal of this study was to investigate the in vitro-in vivo correlation (IVIVC) for fenofibrate immediate release (IR) tablet formulations based on MeltDose-technique. The in vitro determined drug solubility and permeability data were related to the C(max) values observed from two in vivo human studies. Solubility and permeation studies of fenofibrate were conducted in medium simulating the fasted state conditions in the upper jejunum, containing the surfactant compositions of the six formulations at different concentrations.

Interaction of alkaline metal cations with oxidic surfaces: effect on the morphology of SnO2 nanoparticles.

Reaction pathways to SnO(2) nanomaterials through the hydrolysis of hydrated tin tetrachloride precursors were investigated. The products were prepared solvothermally starting from hydrated tin tetrachloride and various (e.g.

Electrically conductive and optically transparent Sb-doped SnO2 STM-probe for local excitation of electroluminescence.

We demonstrate that an optically transparent and electrically conductive antimon-doped tin-oxide tip that is prepared in a sol-gel process can be used as a probe for scanning tunnelling microscopy (STM), yielding atomic vertical and nanometre lateral resolution. Emission of visible light from the tunnelling junction between gold particles and the tip is observed for bias voltages above 7 V. In contrast to the metallic tips generally used in STM, this tip does not significantly perturb the local optical response.