Ring-Expansion Metathesis Polymerization under Confinement.

The cationic molybdenum alkylidyne -heterocyclic carbene (NHC) complex [Mo(C--OMeCH)(OCMe(CF)) (IMes)][B(Ar] (IMes = 1,3-dimesitylimidazol-2-ylidene) was selectively immobilized inside the pores of ordered mesoporous silica (OMS) with pore diameters of 66, 56, and 28 Å and used in the ring-expansion metathesis polymerization (REMP) of cyclic olefins to yield cyclic polymers. A strong confinement effect was observed for -cyclooctene (COE), 1,5-cyclooctadiene (COD), (+)-2,3--dicarbomethoxynorborn-5-ene ((+)-DCMNBE), and 2-methyl-2-phenylcycloprop-1-ene (MPCP), allowing for the synthesis of low-molecular-weight cyclic polymers even at a high monomer concentration. The exclusive formation of cyclic polymers was demonstrated by matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometry.

Room Temperature Ethene to Propene (ETP) Tandem Catalysis using Single Crystalline Solid-State Molecular Pre-Catalysts.

A tandem catalytic ensemble of solid-state molecular organometallic (SMOM) crystalline pre-catalysts are deployed under batch or flow conditions for the ethene to propene process (ETP). These catalysts operate at ambient temperature and low pressure, via sequential ethene dimerization, butenes isomerization and cross-metathesis. Under flow conditions the on-stream ethene conversion (55 %), initial propene selectivity (92 %), stability (71 % selectivity after 7 h) and low temperature/pressures are competitive with the best-in-class heterogeneous systems, marking a new, in crystallo, approach to ETP.

Refining Penile Trauma Management: Introduction of the Penile Trauma Score.

Objective: To introduce the Penile Trauma Score (PTS), a new statistically driven classification system aimed at enhancing the management of penile trauma by providing clinically relevant treatment protocols.

Methods: A retrospective review was conducted of 34 men with penetrating penile injuries at the Elvis Presley Level 1 Trauma Center, Memphis, from January 2014 to December 2016. Variables assessed included injury mechanism, location, depth, and follow-up outcomes related to voiding and erectile function.

Molding Process Retaining Gold Nanoparticle Assembly Structures during Transfer to a Polycarbonate Surface.

The immobilization of gold nanoparticle (AuNP) linear surface assemblies on polycarbonate (PC) melt surface via molding is investigated. The order of the particle assemblies is preserved during the molding process. The assemblies on PC exhibit plasmonic coupling features and dichroic properties.

Stereoselective Ring Expansion Metathesis Polymerization with Cationic Molybdenum Alkylidyne N-Heterocyclic Carbene Complexes.

Molybdenum alkylidyne -heterocyclic carbene (NHC) complexes of the type [Mo(C--CHY)(OC(R)(CF)) (L)(NHC)][B(Ar)] (Y = OMe, NO; R = CH, CF; L = none, pivalonitrile, tetrahydrofuran; NHC = 1,3-dimesitylimidazol-2-ylidene (IMes), 1,3-dimesityl-3,4-dihydroimidazol-2-ylidene (IMesH), 1,3-dimesityl-3,4-dichloroimidazol-2-ylidene (IMesCl), 1,3-diisopropylimidazol-2-ylidene (IPr); B(Ar) = tetrakis(3,5-bis(trifluoromethyl)phen-1-yl)borate) were used in the ring expansion metathesis polymerization (REMP) of cyclic olefins. With -cyclooctene (COE) cyclic, low molecular weight oligomers were obtained at low monomer concentrations and the cyclic nature of the polymer was confirmed by MALDI-TOF measurements. High-molecular weight cyclic poly(COE) became available at high monomer concentrations.

Technical surgical skill assessment of neurovascular bundle dissection and urinary continence recovery after robotic-assisted radical prostatectomy.

Purpose: To examine the association between the of neurovascular bundle dissection and urinary continence recovery after robotic-assisted radical prostatectomy.

Materials And Methods: Patients who underwent RARPs from 2016 to 2018 in two institutions with ≥1-year postoperative follow-up were included. The primary outcomes were time to urinary continence recovery.

A Review of the Role of Robotics in Surgery: To DaVinci and Beyond!

Since its inception in 1985, robotic surgery has evolved into a mainstream surgical approach that has become virtually synonymous with minimally invasive surgery (MIS) and adopted across several specialties offering decreased patient morbidity and improved post-operative outcomes. This article discusses the current role of robotics in MIS and its varied applications, prevalence in the community and the future of the field.

Direct Enantioselective Addition of Alkynes to Imines by a Highly Efficient Palladacycle Catalyst.

Enantiopure propargylic amines are highly valuable synthetic building blocks. Much effort has been devoted to develop methods for their preparation. The arguably most important strategy is the 1,2-addition of alkynes to imines.

Expectations Facing Reality: Complication Management after Aquablation Treatment for Lower Urinary Tract Symptoms.

Aquablation is a modality recently introduced for surgical treatment of men with symptomatic benign prostatic hyperplasia. Large multi-institutional studies have shown a relatively low rate of high-grade (Clavien-Dindo grade ≥3) complications. Postoperative bleeding primarily depends on prostate volume and approached 8.

Regio- and Stereospecific Cyclopolymerization of α,ω-Diynes by Cationic Molybdenum Imido Alkylidene N-Heterocyclic Carbene Complexes.

Both solvent-free and acetonitrile-containing cationic molybdenum imido alkylidene N-heterocyclic carbene (NHC) complexes of the general formula [Mo(NR')(CHCMe R)(NHC)(X) A ] (R' = 2,6-Cl -C H , tBu, 2-CF -C H , 2-tBu-C H , 2,6-iPr -C H , 2,6-Me -C H ; R = Me, Ph; NHC = 1,3-dimesitylimidazol-2-ylidene (IMes), 1,3-di-iPr-imidazol-2-ylidene (IPr), 1,3,5-triphenyl-1,3,4-triazol-2-ylidene); X = CF SO , C F O, OCH(CF ) , OC(CF ) , pyrrolide, C F COO, 2,6-(CF ) -C H COO; A = B(Ar ) , Al(OC(CF ) ) ), have been investigated for their propensity to cyclopolymerize 4,4-disubstituted 1,6-heptadiynes. All metal complexes contain a stereogenic (chiral) metal center, which accounts for the high reactivity and high regioselectivity of insertion (>99%) that are observed for all metal complexes, leading to highly conjugated, α-insertion-derived polyenes that are based on a highly regular polymer backbone and that show absorption maxima close to 600 nm. With the chiral monomer 4-(ethoxycarbonyl)-4-(1S,2R,5S)-(-)-menthoxycarbonyl-1,6-heptadiyne, high syndiospecifity (>99% syndiotactic) is observed.

Mechanotunable Surface Lattice Resonances in the Visible Optical Range by Soft Lithography Templates and Directed Self-Assembly.

We demonstrate a novel colloidal self-assembly approach toward obtaining mechanically tunable, cost-efficient, and low-loss plasmonic nanostructures that show pronounced optical anisotropy upon mechanical deformation. Soft lithography and template-assisted colloidal self-assembly are used to fabricate a stretchable periodic square lattice of gold nanoparticles on macroscopic areas. We stress the impact of particle size distribution on the resulting optical properties.

Confinement templates for hierarchical nanoparticle alignment prepared by azobenzene-based surface relief gratings.

Alignment of nanoparticles to hierarchical periodic structures is an emerging field in the development of patterned surfaces. Common alignment methods are based on templates that guide particle self-assembly. These can be formed using lithographic methods offering an almost free choice of the motif, while being expensive and time-consuming for large-scale production.

Hybridized Guided-Mode Resonances via Colloidal Plasmonic Self-Assembled Grating.

For many photonic applications, it is important to confine light of a specific wavelength at a certain volume of interest at low losses. So far, it is only possible to use the polarized light perpendicular to the solid grid lines to excite waveguide-plasmon polaritons in a waveguide-supported hybrid structure. In our work, we use a plasmonic grating fabricated by colloidal self-assembly and an ultrathin injection layer to guide the resonant modes selectively.

Botryoid Wilms Tumor: A Rare Diagnosis With an Atypical Presentation.

Wilms tumor commonly presents as an asymptomatic abdominal mass. In some cases, it can be accompanied with hypertension, constitutional symptoms, and hematuria when involving the collecting system. Below, we review the case of a child diagnosed with botryoid Wilms tumor involving the upper calyces and renal pelvis in which the presenting symptom was a concern for a foreign body in her left ear, and the only abnormality during initial history and physical examination was stage II hypertension.

Highly Oriented Nanowire Thin Films with Anisotropic Optical Properties Driven by the Simultaneous Influence of Surface Templating and Shear Forces.

The functional properties of nanoparticle thin films depend strongly on the arrangement of the nanoparticles within the material. In particular, anisotropic optoelectronic properties can be achieved through the aligned assembly of 1D nanomaterials such as silver nanowires (AgNWs). However, the control of the hierarchical organization of these nanoscale building blocks across multiple length scales and over large areas is still a challenge.

Optically anisotropic substrates via wrinkle-assisted convective assembly of gold nanorods on macroscopic areas.

We demonstrate the large-scale organisation of anisotropic nanoparticles into linear assemblies displaying optical anisotropy on macroscopic areas. Monodisperse gold nanorods with a hydrophilic protein shell are arranged by dip-coating on wrinkled surfaces and subsequently transferred to indium tin oxide (ITO) substrates by capillary transfer printing. We elucidate how tuning the wrinkle amplitude enables us to precisely adjust the assembly morphology and fabricate single, double and triple nanorod lines.

Improved radiographic outcomes with patient-specific total knee arthroplasty.

Patient-specific guides can improve limb alignment and implant positioning in total knee arthroplasty, although not all studies have supported this benefit. We compared the radiographs of 100 consecutively-performed patient-specific total knees to a similar group that was implanted with conventional instruments instead. The patient-specific group showed more accurate reproduction of the theoretically ideal mechanical axis, with fewer outliers, but implant positioning was comparable between groups.