Orodispersible films prepared by hot-melt extrusion versus solvent casting.

This study investigated the influence of solvent casting and hot-melt extrusion manufacturing methods on the physical, chemical, and functional properties of orodispersible films with the same composition and incorporating a poorly soluble active pharmaceutical ingredient (API). Both techniques produced films that met pharmaceutical standards for disintegration and dissolution times. Solvent casting, the most used method, yielded films with homogeneous distribution of plasticizer, smoother textures, and greater flexibility.

Synthesis of Carboxylate-Dialdehyde Cellulose to Use as a Component in Composite Thin Films for an Antibacterial Material in Wound Dressing.

Wound infections can lead to life-threatening infection and death. Antibacterial materials from biopolymers in the form of films are a promising strategy for wound dressings. Carboxylate-dialdehyde cellulose (CDAC) is a proper candidate for use as an antibacterial material due to its biocompatibility, nontoxicity, and antibacterial property.

Evaluating the biomolecular interaction between delamanid/formulations and human serum albumin by fluorescence, CD spectroscopy and SPR: Effects on protein conformation, kinetic and thermodynamic parameters.

Delamanid is an anti-tuberculosis drug used for the treatment of drug-resistant tuberculosis. Since delamanid has a high protein bound potential, even patients with low albumin levels should experience high and rapid delamanid clearance. However, the interaction between delamanid and albumin should be better controlled to optimize drug efficacy.

Synergic versus Antagonist Effects of Rutin on Gallic Acid or Coumarin Incorporated into Chitosan Active Films: Impacts on Their Release Kinetics and Antioxidant Activity.

This work deals with the study of the release and antioxidant activity kinetics of three natural antioxidants associated as binary mixture (coumarin, and/or gallic acid and rutin) from chitosan films. Antioxidants were incorporated into film alone or in binary mixture. The aim was to determine the influence of rutin on the phenolic acid and benzopyrone.

Sustainable 3D printing of oral films with tunable characteristics using CMC-based inks from durian rind wastes.

With the growing interest in environmentally friendly and personalized medicines, new concept for combining three-dimensional printing (3DP) with natural-based biomaterials derived from agro-food wastes has emerged. This approach provides sustainable solutions for agricultural waste management and potential for developing of novel pharmaceutical products with tunable characteristics. This work demonstrated the feasibility of fabricating personalized theophylline films with four different structures (Full, Grid, Star, and Hilbert) using syringe extrusion 3DP and carboxymethyl cellulose (CMC) derived from durian rind wastes.

Core-shell polygalacturonate magnetic iron oxide nanoparticles: Synthesis, characterization, and functionalities.

This work aims to synthesize polygalacturonate-based magnetic iron oxide nanoparticles (INP-polyGalA). The synthesis consists of the diffusion of both Fe and Fe at a molar ratio of 1:2 through polyGalA solution followed by the addition of an alkaline solution. To form individual nanoparticle materials, the polyGalA concentration needs to be below its overlapping concentration (C*).

Steroidal glycosides from the Vietnamese cultivar Cordyline fruticosa "Fairchild red".

A phytochemical study of Cordyline fruticosa "Fairchild red" (Asparagaceae) from Vietnam, led to the isolation of fourteen steroidal glycosides, including twelve previously undescribed along with two known ones. Ten compounds were obtained by successive solid/liquid chromatographic methods from an aqueous-ethanolic extract of the roots, and four from the aerial parts. Their structures were elucidated mainly by spectroscopic analysis 2D NMR and mass spectroscopy (ESI-MS), as spirostanol glycosides, 5α-spirost-25(27)-ene-1β,3β,4α-triol 1-O-β-D-fucopyranoside, 5α-spirost-(25)27-ene-1β,3β,4α-triol 1-O-β-D-xylopyranoside, 5α-spirost-(25)27-ene-1β,3β,4α-triol 1-O-α-L-rhamnopyranosyl-(1 → 2)-β-D-fucopyranoside, 5α-spirost-(25)27-ene-1β,3β,4α-triol 1-O-α-L-rhamnopyranosyl-(1 → 2)-(4-O-sulfo)-β-D-fucopyranoside, 5α-spirost-25(27)-ene-1β,3β-diol 1-O-α-L-rhamnopyranosyl-(1 → 2)-β-D-fucopyranoside, and 5α-spirost-25(27)-ene-1β,3β-diol 1-O-α-L-rhamnopyranosyl-(1 → 2)-α-L-arabinopyranoside.

Modeling of the release kinetics of phenolic acids embedded in gelatin/chitosan bioactive-packaging films: Influence of both water activity and viscosity of the food simulant on the film structure and antioxidant activity.

Hydrocolloid-based films containing natural phenolic antioxidants (gallic and trans-cinnamic acids at 5% w/wt of polymers) embedded in a gelatin/chitosan matrix were designed as sustainable active packaging. This work deals with characterizing the release mechanisms of the phenolic acids from the films immersed into food simulants (sugar or polyol solutions) having different water activities and viscosities. The films containing gallic acid exhibited higher antioxidant activities than the trans-cinnamic acid films.

Cytotoxic glycosides from the roots of Weigela x "Bristol Ruby".

Seven oleanane-type glycosides were extracted and isolated by various chromatographic methods from the roots of Weigela x "Bristol Ruby" (1-7), six previously undescribed (1-6) and a known one (7). Their structures were assigned by spectroscopic analysis mainly 2D NMR and mass spectrometry (ESIMS). Selected triterpenoid glycosides (1-3, 6, 7) displayed a good cytotoxic activity against a mouse colon cancer cell line CT26.

Insights into gelation kinetics and gel front migration in cation-induced polysaccharide hydrogels by viscoelastic and turbidity measurements: Effect of the nature of divalent cations.

Polysaccharide-based hydrogels were prepared by the diffusion of various divalent cations (X) into the polygalacturonate (polyGal) solution through a dialysis membrane. The diffusion of various divalent cations (Mg, Ca, Zn and Ba) was investigated. The polyGal gel growth was studied as a function of the initial cation concentration by both viscoelastic and turbidity measurements.

Optimized tableting for extremely oxygen-sensitive probiotics using direct compression.

Faecalibacterium prausnitzii was previously recognized for its intestinal anti-inflammatory activities and it has been shown less abundant in patients with chronic intestinal diseases. However, the main problems encountered in the use of this interesting anaerobic microorganism are firstly its high sensitivity to the oxygen and secondly, its ability to reach the large intestine alive as targeted site. The aim of this study was to investigate the effect of direct compression on the viability of this probiotic strain after different compression pressure and storage using three different excipients (MCC, HPMC and HPMCP).

Effect of Plasticizer Type on Tensile Property and In Vitro Indomethacin Release of Thin Films Based on Low-Methoxyl Pectin.

This study developed the interests of low-methoxyl pectin (LMP) together with plasticizers for the preparation of elastic thin films. The effect of different plasticizer types (glycerol: Gly; sorbitol: Sor; propylene glycol: PG; and polyethylene glycol 300: PEG 300) and concentrations (20⁻40% ) on mechanical and thermal properties of LMP films as well as on in vitro release of indomethacin were evaluated. Without any plasticizer, a brittle LMP film with low tensile strength and % elongation at break was obtained.

Binding of Divalent Cations to Polygalacturonate: A Mechanism Driven by the Hydration Water.

We have investigated the interactions between polygalacturonate (polyGal) and four divalent cations (M(2+) = Ba(2+), Ca(2+), Mg(2+), Zn(2+)) that differ in size and affinity for water. Our results evidence that M(2+)-polyGal interactions are intimately linked to the affinity of M(2+) for water. Mg(2+) interacts so strongly with water that it remains weakly bound to polyGal (polycondensation) by sharing water molecules from its first coordination shell with the carboxylate groups of polyGal.

Structural behaviour differences in low methoxy pectin solutions in the presence of divalent cations (Ca(2+) and Zn(2+)): a process driven by the binding mechanism of the cation with the galacturonate unit.

In this paper, we compare the interactions between low methoxy pectin (LMP) and either Ca(2+) or Zn(2+) in semi-dilute solutions. Intrinsic viscosity and turbidity measurements reveal that pectin-calcium solutions are more viscous, but yet less turbid, than pectin-zinc ones. To get a molecular understanding of the origin of this rather unexpected behavior, we further performed isothermal titration calorimetry, small angle neutron scattering experiments, as well as molecular dynamics simulations.

Physico-chemical state influences in vitro release profile of curcumin from pectin beads.

Curcumin is a polyphenolic compound with diverse effects interesting to develop health benefit products but its formulation in functional foods or in food supplement is hampered by its poor water solubility and susceptibility to alkaline conditions, light, oxidation and heat. Encapsulation of curcumin could be a mean to overcome these difficulties. In this paper, curcumin was encapsulated by ionotropic gelation method in low methoxyl pectin beads associated with different surfactants: Solutol(®), Transcutol(®) and sodium caseinate.

The impact of whey protein preheating on the properties of emulsion gel bead.

Thermal treatment effect (70 or 80 °C for 5 or 30 min) was evaluated on functional properties of whey protein isolate (WPI) dispersions used for the development of novel vitamin A delivery systems based on emulsion gel beads. This process combines an (O/W) emulsion diluted by a polysaccharide solution and a cold-set gelation induced by salt addition. Pre-heated WPI had a significant impact on the denaturation degree and on the surface hydrophobicity, respectively studied by differential scanning calorimetry and fluorescence.

Influence of low methoxyl pectin gel textures and in vitro release of rutin from calcium pectinate beads.

This study described the preparation and characterization of low methoxyl pectin (LMP) gels and beads for controlled release applications. The rheological characterization of the various formulations was proposed. Then the mechanical and morphological characterizations of beads were determined.

Silica-coated calcium pectinate beads for colonic drug delivery.

The aim of this work is to develop novel organic-inorganic hybrid beads for colonic drug delivery. For this purpose, calcium pectinate beads with theophylline are prepared by a cross-linking reaction between amidated low-methoxyl pectin and calcium ions. The beads are then covered with silica, starting from tetraethyoxysilane (TEOS), by a sol-gel process.

Zinc-pectinate beads as an in vivo self-assembling system for pulsatile drug delivery.

Zinc-pectinate beads are interesting drug carriers for oral delivery. In order to investigate their in vitro and in vivo release behaviour, ionotropic gelation was used to entrap theophylline into calcium- or zinc-pectinate beads. Beads were investigated in vitro for their particle properties, especially the release kinetic in different media, and their in vivo pharmacokinetic parameters were tested in rats.

Structure of calcium and zinc pectinate films investigated by FTIR spectroscopy.

Calcium and zinc pectinate gels were prepared using a method which allowed calcium or zinc to diffuse from the cross-linking solution through a dialysis membrane to form a gel with amidated low-methoxyl pectin. The gel thus obtained was then dried, and the film structure was studied using FTIR spectroscopy as a function of the cation content (0%, 5%, 10%, and 15% w/v). Important consideration was given to the three functional groups (amide, carboxyl ester, and carboxylate groups) present in the pectin.