Sol-Gel-Synthesized Metal Oxide Nanostructures: Advancements and Prospects for Spintronic Applications-A Comprehensive Review.

Spintronics, an interdisciplinary field merging magnetism and electronics, has attracted considerable interest due to its potential to transform data storage, logic devices, and emerging quantum technologies. Among the materials explored for spintronic applications, metal oxide nanostructures synthesized via sol-gel methods offer a unique combination of low-cost processing, structural tunability, and defect-mediated magnetic control. This comprehensive review presents a critical overview of recent advances in sol-gel-derived magnetic oxides, such as Co-doped ZnO, LaSrMnO, FeO, NiFeO, and transition-metal-doped TiO, with emphasis on synthesis strategies, the dopant distribution, and room-temperature ferromagnetic behavior.

Influence of the pH Synthesis of FeO Magnetic Nanoparticles on Their Applicability for Magnetic Hyperthermia: An In Vitro Analysis.

Nanotechnology, specifically magnetic nanoparticles (MNPs), is revolutionizing cancer treatment. Magnetic hyperthermia is a treatment that, using MNPs, can selectively kill cancer cells without causing damage to the surrounding tissues. : This work aimed to analyze how the synthesis conditions, namely, how the pH of the reaction can influence the magnetic properties of FeO nanoparticles for magnetic hyperthermia, using the hydrothermal synthesis.

Polycaprolactone/Doped Bioactive Glass Composite Scaffolds for Bone Regeneration.

Critical-size bone defects do not heal spontaneously and require external support, making bone regeneration a central challenge in tissue engineering. Polymeric/ceramic composite scaffolds offer a promising approach to mimic the structural and biological properties of bone. In this study, we aimed to evaluate the effect of different doping oxides in bioactive glass (BG) on the performance of polycaprolactone (PCL)-based composite scaffolds for bone tissue engineering applications.

Sol-Gel Synthesis and Comprehensive Study of Structural, Electrical, and Magnetic Properties of BiBaO Perovskite.

In this study, BiBaO perovskite was successfully synthesized via the sol-gel method and thoroughly characterized to evaluate its structural, microstructural, dielectric, electrical, and magnetic properties. X-ray diffraction (XRD) confirmed the formation of a single-phase perovskite structure with high crystallinity. Scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDX) revealed a uniform grain morphology and elemental composition consistent with the intended stoichiometry.

Progress and Developments in the Fabrication and Characterization of Metal Halide Perovskites for Photovoltaic Applications.

Metal halide perovskites have emerged as a groundbreaking material class for photovoltaic applications, owing to their exceptional optoelectronic properties, tunable bandgap, and cost-effective fabrication processes. This review offers a comprehensive analysis of recent advancements in synthesis, structural engineering, and characterization of metal halide perovskites for efficient solar energy conversion. We explore a range of fabrication techniques, including solution processing, vapor deposition, and nanostructuring, emphasizing their impact on material stability, efficiency, and scalability.

A comparison of electrospinning and pressurized gyration: Production of empagliflozin-loaded polylactic acid/polycaprolactone fibrous patches.

Novel therapeutic strategies are essential for enhancing efficacy and accelerating the treatment of diabetes mellitus. This investigation focused on incorporating empagliflozin into a composite of polylactic acid and polycaprolactone, resulting in the fabrication of drug-loaded fibrous patches (DFPs) for transdermal application, both by electrospinning (ES) and by pressurized gyration (PG). Scanning electron microscopy results revealed that DFPs generated through the PG method exhibited smaller diameters and a larger surface area than ES.

Green Sol-Gel Synthesis of Iron Oxide Nanoparticles for Magnetic Hyperthermia Applications.

Background/objectives: The unique properties of iron oxide nanoparticles have attracted significant interest within the biomedical community, particularly for magnetic hyperthermia applications. Various synthesis methods have been developed to optimize these nanoparticles.

Methods: In this study, we employed a powdered coconut water (PCW)-assisted sol-gel method to produce magnetite nanoparticles for the first time.

Crystal Structural Characteristics and Electrical Properties of Novel Sol-Gel Synthesis of Ceramic BiBa(FeMn)O.

In this investigation, our primary objective is to explore the structural, morphological, and electrical characteristics of BiBa(FeMn)O ceramic material synthesized by the sol-gel method. The prepared sample underwent synthesis through the conventional sol-gel technique. Examination through X-ray diffraction (XRD) unveiled a well-defined rhombohedral structure within the R3´C space group.

The Effect of Iron Oxide Insertion on the In Vitro Bioactivity, and Antibacterial Properties of the 45S5 Bioactive Glass.

The aging population and increasing incidence of trauma among younger age groups have heightened the increasing demand for reliable implant materials. Effective implant materials must demonstrate rapid osseointegration and strong antibacterial properties to ensure optimal patient outcomes and decrease the chance of implant rejection. This study aims to enhance the bone-implant interface by utilizing 45S5 bioglass modified with various concentrations of FeO as a coating material.

Dielectric Characterization of Solutions of Galactomannan Extracted from L.: Effects of Purification and Ethanol Concentration.

Galactomannans are polysaccharides obtained from legume seed extraction. They present a chemical structure consisting of D-mannose chains linked by glycosidic bonds and galactose branches. The main focus lies in their use as thickeners in the food industry, aimed at improving the dielectric properties of food during heating processes within the radiofrequency and microwave ranges.

Study of biphasic calcium phosphate (BCP) ceramics of tilapia fish bones by age.

Biphasic calcium phosphate (BCP), consisting of bioceramics such as HAp + β-TCP and Ca(PO)(OH) + Ca(PO), is a popular choice for optimizing performance due to its superior biological reabsorption and osseointegration. In this study, BCP was produced by calcining the bones of tilapia fish (Oreochromis niloticus) reared in net cages and slaughtered at an age ranging from 15 to 420 days. The bones were cleaned and dried, calcined at 900 °C for 8 h, and then subjected to high-energy grinding for 3 h to produce BCP powders.

Exploring the Impact of Copper Oxide Substitution on Structure, Morphology, Bioactivity, and Electrical Properties of 45S5 Bioglass.

In recent decades, the requirements for implantable medical devices have increased, but the risks of implant rejection still exist. These issues are primarily associated with poor osseointegration, leading to biofilm formation on the implant surface. This study focuses on addressing these issues by developing a biomaterial for implant coatings.

Influence of the Addition of Zinc, Strontium, or Magnesium Oxides to the Bioglass 45S5 Network on Electrical Behavior.

45S5 Bioglass has been widely used in regenerative medicine due to its ability to dissolve when inserted into the body. Its typically amorphous structure allows for an ideal dissolution rate for the formation of the hydroxyapatite layer, which is important for the development of new bone. This bioactive capacity can also be controlled by adding other oxides (e.

Bioactive Glasses Containing Strontium or Magnesium Ions to Enhance the Biological Response in Bone Regeneration.

The non-surgical treatments are being required to reconstruct damaged tissue, prioritizing our body's natural healing process. Thus, the use of bioactive materials such as bioactive glass has been studied to support the repair and restoration of hard and soft tissue. Thus, in this work Bioglass 45S5 was developed, adding 1 and 2%mol of SrO or MgO and the physical and biological properties were evaluated.

Exploring bismuth-doped polycrystalline ceramic BaBiNiMnO: synthesis, structure, and electrical properties for advanced electronic applications.

This manuscript investigates the structural and electrical properties of a BaBiNiMnO (BNMO) perovskite compound synthesized through the sol-gel method. The orthorhombic crystal structure of the sample is confirmed by X-ray diffraction analysis. The electrical conductivity of BNMO is found to increase with frequency, indicating the presence of local charge carriers.

Antibacterial Biomaterial Based on Bioglass Modified with Copper for Implants Coating.

Biofilm-related implant infections pose a substantial threat to patients, leading to inflammation in the surrounding tissue, and often resulting in implant loss and the necessity for additional surgeries. Overcoming this implantology challenge is crucial to ensure the success and durability of implants. This study shows the development of antibacterial materials for implant coatings by incorporating copper into 45S5 Bioglass.

Barium Titanate/Gadolinium Ferrite: A New Material Composite to Store Energy.

This work investigates the dielectric properties of barium titanate/gadolinium ferrite ceramic composites, with different concentrations of each material. Our objective was to increase the storage ability of this material, finding a compromise between high permittivity and low dielectric losses. A two-step sintering procedure was used in the preparation of the composites to attain the desired results.

Bioactive Glass Modified with Zirconium Incorporation for Dental Implant Applications: Fabrication, Structural, Electrical, and Biological Analysis.

Implantology is crucial for restoring aesthetics and masticatory function in oral rehabilitation. Despite its advantages, certain issues, such as bacterial infection, may still arise that hinder osseointegration and result in implant rejection. This work aims to address these challenges by developing a biomaterial for dental implant coating based on 45S5 Bioglass modified by zirconium insertion.

Potassium Ferrite for Biomedical Applications.

Ferrites have been widely studied for their use in the biomedical area, mostly due to their magnetic properties, which gives them the potential to be used in diagnostics, drug delivery, and in treatment with magnetic hyperthermia, for example. In this work, KFeO particles were synthesized with a proteic sol-gel method using powdered coconut water as a precursor; this method is based on the principles of green chemistry. To improve its properties, the base powder obtained was subjected to multiple heat treatments at temperatures between 350 and 1300 °C.

An Eco-Friendly Process to Extract Hydroxyapatite from Sheep Bones for Regenerative Medicine: Structural, Morphologic and Electrical Studies.

Hydroxyapatite (HA) promotes excellent bone regeneration in bone-tissue engineering, due to its similarity to bone mineral and its ability to connect to living tissues. These factors promote the osteointegration process. This process can be enhanced by the presence of electrical charges, stored in the HA.

Bioactivity Enhancement of Plasma-Sprayed Hydroxyapatite Coatings through Non-Contact Corona Electrical Charging.

Atmospheric plasma spray (APS) remains the only certified industrial process to produce hydroxyapatite (Hap) coatings on orthopaedic and dental implants intended for commercialization. Despite the established clinical success of Hap-coated implants, such as hip and knee arthroplasties, a concern is being raised regarding the failure and revision rates in younger patients, which are increasing rapidly worldwide. The lifetime risk of replacement for patients in the 50-60 age interval is about 35%, which is significantly higher than 5% for patients aged 70 or older.

Extensive Investigation on the Effect of Niobium Insertion on the Physical and Biological Properties of 45S5 Bioactive Glass for Dental Implant.

Dental implants have emerged as one of the most consistent and predictable treatments in the oral surgery field. However, the placement of the implant is sometimes associated with bacterial infection leading to its loss. In this work, we intend to solve this problem through the development of a biomaterial for implant coatings based on 45S5 Bioglass modified with different amounts of niobium pentoxide (NbO).

Oral empagliflozin-loaded tri-layer core-sheath fibers fabricated using tri-axial electrospinning: Enhanced in vitro and in vivo antidiabetic performance.

Empagliflozin (EM) was successfully loaded in polycaprolactone/poly (L-lactic acid)/polymethyl methacrylate (PCL/PLA/PMMA) fibers. In the rat β-cell line (BRIN-BD11), the insulin expression ratio of pancreatic β-cells was stimulated at high and low glucose by culturing with tri-layer EM-loaded fiber (EMF) for 48 h. The expression ratios of glucokinase and GLUT-2 proteins increased after EMF treatment.

Fabrication, Structural and Biological Characterization of Zinc-Containing Bioactive Glasses and Their Use in Membranes for Guided Bone Regeneration.

Polymeric membranes are widely used in guided bone regeneration (GBR), particularly in dentistry. In addition, bioactive glasses can be added to the polymers in order to develop a matrix that is osteoconductive and osteoinductive, increasing cell adhesion and proliferation. The bioactive glasses allow the insertion into its network of therapeutic ions in order to add specific biological properties.

Biocompatibility, Bioactivity, and Antibacterial Behaviour of Cerium-Containing Bioglass.

The main reason for the increased use of dental implants in clinical practice is associated with aesthetic parameters. Implants are also presented as the only technique that conserves and stimulates natural bone. However, there are several problems associated with infections, such as peri-implantitis.