Field Test of a Bioelectrochemical Membrane-Less Reactor for Chlorinated Aliphatic Hydrocarbon and Nitrate Removal from a Contaminated Groundwater.

This study uses a membrane-less reactor to explore the bioelectrochemical remediation of real contaminated groundwater from chlorinated aliphatic hydrocarbons (CAHs) and nitrates. The research focuses on testing a column-type bioelectrochemical reactor to stimulate in situ degradation of contaminants through the supply of electrons by a graphite granules biocathode. After a preliminary laboratory characterization and operation with a synthetic feeding solution, a field test is conducted in a real contaminated site, where the reactor demonstrates effective degradation of CAHs and inorganic anions.

A Coupled Adsorption-Biodegradation (CAB) Process Employing a Polyhydroxybutyrate (PHB)-Biochar Mini Pilot-Scale Reactor for Trichloroethylene-Contaminated Groundwater Remediation.

Actions for improving water quality are critical and include the remediation of polluted groundwater. The effectiveness of the remediation strategy to remove contamination by chlorinated solvents may be increased by combining physicochemical treatments (i.e.

Biochar/Biopolymer Composites for Potential In Situ Groundwater Remediation.

This study explores the use of pine wood biochar (BC) waste gasified at 950 °C as fillers in polymer matrices to create BC@biopolymer composites with perspectives in groundwater remediation. Four biochar samples underwent different sieving and grinding processes and were extensively characterized via UV-Vis, FTIR, and FESEM-EDS, highlighting the fact that that BCs are essentially graphitic in nature with a sponge-like morphology. The grinding process influences the particle size, reducing the specific surface area by about 30% (evaluated by BET).

Tetrachloroethane (TeCA) removal through sequential graphite-mixed metal oxide electrodes in a bioelectrochemical reactor.

Electro-bioremediation offers a promising approach for eliminating persistent pollutants from groundwater since allows the stimulation of biological dechlorinating activity, utilizing renewable electricity for process operation and avoiding the injection of chemicals into aquifers. In this study, a two-chamber microbial electrolysis cell has been utilized to achieve both reductive and oxidative degradation of tetrachloroethane (TeCA). By polarizing the graphite granules cathodic chamber at -650 mV vs the standard hydrogen electrode and employing a mixed metal oxide (MMO) counter electrode for oxygen production, the reductive and oxidative environment necessary for TeCA removal has been established.

Oxygen limitation in aerobic polyhydroxyalkanoates production from sewage sludge anaerobic fermentation liquids under low and medium organic loading rate.

The present study describes the microbial production of polyhydroxyalkanoates (PHA) from thermally pre-treated sewage sludge at pilot scale level, investigating for the first time the effect of the organic loading rate (OLR) under oxygen limitation on biomass storage properties and kinetics. Polymer characteristics have been also evaluated. The selection/enrichment of PHA-storing biomass was successfully achieved in a Sequencing Batch Reactor (SBR) under short hydraulic retention time (HRT; 2 days).

A Polyhydroxybutyrate (PHB)-Biochar Reactor for the Adsorption and Biodegradation of Trichloroethylene: Design and Startup Phase.

In this work, polyhydroxy butyrate (PHB) and biochar from pine wood (PWB) are used in a mini-pilot scale biological reactor (11.3 L of geometric volume) for trichloroethylene (TCE) removal (80 mgTCE/day and 6 L/day of flow rate). The PHB-biochar reactor was realized with two sequential reactive areas to simulate a multi-reactive permeable barrier.

Modelling Mixed Microbial Culture Polyhydroxyalkanoate Accumulation Bioprocess towards Novel Methods for Polymer Production Using Dilute Volatile Fatty Acid Rich Feedstocks.

Volatile fatty acid (VFA) rich streams from fermentation of organic residuals and wastewater are suitable feedstocks for mixed microbial culture (MMC) Polyhydroxyalkanoate (PHA) production. However, many such streams have low total VFA concentration (1-10 gCOD/L). PHA accumulation requires a flow-through bioprocess if the VFAs are not concentrated.

Effect of the organic loading rate on the PHA-storing microbiome in sequencing batch reactors operated with uncoupled carbon and nitrogen feeding.

Over the last years, in a search for sustainable and biodegradable alternatives to petrol-based plastics, biotechnological applications turned to the potentialities of mixed microbial cultures (MMC) for producing polyhydroxyalkanoates (PHAs). Under a feast and famine regime, an uncoupled carbon (C) and nitrogen (N)-feeding strategy may be adopted by dosing the C-source at the beginning of the feast and the N-source at the beginning of the famine in order to stimulate a PHA storage response and microbial growth. Even though this strategy has been already successfully applied for the PHA production, very few information is to date available regarding the MMC operating in these systems and the influence of Organic Loading Rate (OLR) on their selection and enrichment.

Ethylic Esters as Green Solvents for the Extraction of Intracellular Polyhydroxyalkanoates Produced by Mixed Microbial Culture.

Volatile fatty acids obtained from the fermentation of the organic fraction of municipal solid waste can be used as raw materials for non-toxic ethyl ester (EE) synthesis as well as feedstock for the production of polyhydroxyalkanoates (PHAs). Taking advantage of the concept of an integrated process of a bio-refinery, in the present paper, a systematic investigation on the extraction of intracellular poly(3-hydroxybutyrate--3-hydroxyvalerate), produced by mixed microbial culture by using EEs was reported. Among the tested EEs, ethyl acetate (EA) was the best solvent, dissolving the copolymer at the lowest temperature.

Combined Strategies to Prompt the Biological Reduction of Chlorinated Aliphatic Hydrocarbons: New Sustainable Options for Bioremediation Application.

Groundwater remediation is one of the main objectives to minimize environmental impacts and health risks. Chlorinated aliphatic hydrocarbons contamination is prevalent and presents particularly challenging scenarios to manage with a single strategy. Different technologies can manage contamination sources and plumes, although they are usually energy-intensive processes.

Characterization of Polyhydroxyalkanoates Produced at Pilot Scale From Different Organic Wastes.

Polyhydroxyalkanoates (PHAs) production at pilot scale has been recently investigated and carried out exploiting different process configurations and organic wastes. More in detail, three pilot platforms, in Treviso (North-East of Italy), Carbonera (North-East of Italy) and Lisbon, produced PHAs by open mixed microbial cultures (MMCs) and different organic waste streams: organic fraction of municipal solid waste and sewage sludge (OFMSW-WAS), cellulosic primary sludge (CPS), and fruit waste (FW), respectively. In this context, two stabilization methods have been applied, and compared, for preserving the amount of PHA inside the cells: thermal drying and wet acidification of the biomass at the end of PHA accumulation process.

Identification and Quantification of Polycyclic Aromatic Hydrocarbons in Polyhydroxyalkanoates Produced from Mixed Microbial Cultures and Municipal Organic Wastes at Pilot Scale.

Polyhydroxyalkanoates (PHAs) are well-known biodegradable plastics produced by various bacterial strains, whose major drawback is constituted by the high cost of their synthesis. Producing PHAs from mixed microbial cultures and employing organic wastes as a carbon source allows us to both reduce cost and valorize available renewable resources, such as food waste and sewage sludge. However, different types of pollutants, originally contained in organic matrices, could persist into the final product, thus compromising their safety.

Valorization of Municipal Biowaste into Electrospun Poly(3-hydroxybutyrate--3-hydroxyvalerate) Biopapers for Food Packaging Applications.

The present study reports on the production and characterization of a new biopackaging material made of poly(3-hydroxybutyrate--3-hydroxyvalerate) (PHBV) derived from municipal biowaste (MBW) and produced by the mixed bacterial culture technology. After purification and extraction, the MBW-derived PHBV was processed by electrospinning to yield defect-free ultrathin fibers, which were thermally post-treated. Annealing at 130 °C, well below the biopolymer's melting temperature (), successfully yielded a continuous film resulting from coalescence of the electrospun fibrillar morphology, the so-called biopaper, exhibiting enhanced optical and color properties compared to traditional melt compounding routes.

Effect of the temperature in a mixed culture pilot scale aerobic process for food waste and sewage sludge conversion into polyhydroxyalkanoates.

The utilisation of urban organic waste as feedstock for polyhydroxyalkanoates (PHA) production is growing since it allows to solve the main concerns about their disposal and simultaneously to recover added-value products. A pilot scale platform has been designed for this purpose. The VFA-rich fermentation liquid coming from the anaerobic treatment of both source-sorted organic fraction of municipal solid waste (OFMSW) and waste activated sludge (WAS) has been used as substrate for the aerobic process steps: a first sequencing batch reactor (SBR, 100 L) for the selection of a PHA-producing biomass, and a second fed-batch reactor (70 L) for PHA accumulation inside the cells.

Elemental concentration and migratability in bioplastics derived from organic waste.

In line with the Circular Economy approach, the production of polyhydroxyalkanoate (PHA) with organic waste as the feedstock may a biotechnological application to reduce waste and recover high-value materials. The potential contaminants that could transfer from bio-waste to a PHA include inorganic elements, such as heavy metals. Hence, the total content and migratability of certain elements were evaluated in several PHA samples produced from different origins and following different methods.

Polychlorinated Biphenyl Profile in Polyhydroxy-alkanoates Synthetized from Urban Organic Wastes.

The microbial synthesis of polyhydroxyalkanoates (PHA) from organic wastes is a valuable process to valorize available renewable resources, such as food wastes and biological sludge. Bioplastics find many applications in various sectors, from medical field to food industry. However, persistent organic pollutants could be transferred from wastes to the final product.

High rate selection of PHA accumulating mixed cultures in sequencing batch reactors with uncoupled carbon and nitrogen feeding.

The selection and enrichment of a mixed microbial culture (MMC) for polyhydroxyalkanoates (PHA) production is a well-known technology, typically carried out in sequencing batch reactors (SBR) operated under a feast-famine regime. With a nitrogen-deficient carbon source to be used as feedstock for PHA synthesis, a nutrient supply in the SBR is required for efficient microbial growth. In this study, an uncoupled carbon (C) and nitrogen (N) feeding strategy was adopted by dosing the C-source at the beginning of the feast and the N-source at the beginning of the famine, at a fixed C/N ratio of 33.