Optimizing the Recovery of Rare Earth Elements from Spent Fluorescent Lamps by Living sp.

Given the significant industrial applications of rare earth elements (REEs), supply chain constraints, and negative environmental impacts associated with their extraction, finding alternative sources has become a critical challenge. Previously, we highlighted the potential of living sp. in the removal and pre-concentration of Y from a solution obtained by sequential acid leaching of spent fluorescent lamps (SFLs).

Enhanced removal of rare earth elements from aqueous media: exploring the potential of AM-3 and AM-4 titanosilicates.

This study investigates the impact of three key variables on the performance of nanoporous AM-3 and layered AM-4 titanosilicates in removing nine REEs (Y, La, Ce, Pr, Nd, Eu, Gd, Tb, and Dy) from natural mineral water and identifies optimal operational conditions using Response Surface Methodology (RSM). The experimental conditions were determined by a Box-Behnken Design of 3 factors-3 levels (pH 4, 6, and 8; sorbent dose 20, 100, and 180 mg/L; and element concentration 1, 3, and 5 μmol/L). Three-dimensional response surfaces were used to assess the linear, quadratic, and interaction influences of each factor on the REEs' removal percentage.

Removal of chromium(III) from contaminated waters using cobalt ferrite: how safe is remediated water to aquatic wildlife?

The release of hazardous elements by industrial effluents to aquatic ecosystems is a potential threat to the environment. Chromium (Cr) is one of the elements whose levels in several freshwater ecosystems should be reduced to promote water reuse. In recent years, magnetic materials have gained increasing interest as sorbents because of their easy removal from treated water through magnetic separation.

Eco-friendly methodology for removing and recovering rare earth elements from saline industrial wastewater.

In this study, response surface methodology (RSM) was applied with a Box-Behnken design to optimize the biosorption (removal and bioconcentration) of rare earth elements (REEs) (Y, La, Ce Eu, Gd, Tb) by living Ulva sp. from diluted industrial wastewaters (also containing Pt and the classic contaminants Hg, Pb, Zn, Cu, Co, and Cd). Element concentration (A: 10-190 μg/L), wastewater salinity (B: 15-35), and Ulva sp.

Application of response surface methodology and box-behnken design for the optimization of mercury removal by Ulva sp.

Mercury (Hg) is a global and top priority contaminant, toxic at low concentrations. Although it has been progressively eliminated from processes, this metal continues to circulate in the atmosphere, soil, and water. In this work, the Response Surface Methodology (RSM) combined with a Box-Behnken Design (3 factors - 3 levels) was used to optimize key operational conditions that influence the removal and uptake of Hg by living macroalga Ulva sp.

In Vitro Hepatotoxic and Neurotoxic Effects of Titanium and Cerium Dioxide Nanoparticles, Arsenic and Mercury Co-Exposure.

Considering the increasing emergence of new contaminants, such as nanomaterials, mixing with legacy contaminants, including metal(loid)s, it becomes imperative to understand the toxic profile resulting from these interactions. This work aimed at assessing and comparing the individual and combined hepatotoxic and neurotoxic potential of titanium dioxide nanoparticles (TiONPs 0.75-75 mg/L), cerium oxide nanoparticles (CeONPs 0.

Can water remediated by manganese spinel ferrite nanoparticles be safe for marine bivalves?

In the last few years the use of nanoparticles (NPs) such as the manganese spinel ferrite (MnFeO) has been increasing, with a vast variety of applications including water remediation from pollutants as metal(oid)s. Although an increasing number of studies already demonstrated the potential toxicity of NPs towards aquatic systems and inhabiting organisms, there is still scarce information on the potential hazard of the remediated water using NPs. The present study aimed to evaluate the ecotoxicological safety of Pb contaminated seawater remediated with MnFeO, NPs, assessing the toxicity induced in mussels Mytilus galloprovincialis exposed to contaminated seawater and to water that was remediated using MnFeO, NPs.

Spinel-type ferrite nanoparticles for removal of arsenic(V) from water.

Spinel ferrite particles (FeO, MnFeO, and CoFeO) were investigated as magnetic nanosorbents for removing arsenic from spiked water samples. The nanosorbents were collected via magnetic separation from aqueous solutions spiked with an arsenic concentration that mimics the amount of this contaminant in real water samples. This research shows that using amounts of CoFeO or MnFeO as low as 40 mg/L, the arsenic content in the contaminated water decreased for levels below the maximum admitted value by the World Health Organization for drinking waters (10 μg/L).

Unravelling the Potential Cytotoxic Effects of Metal Oxide Nanoparticles and Metal(Loid) Mixtures on A549 Human Cell Line.

Humans are typically exposed to environmental contaminants' mixtures that result in different toxicity than exposure to the individual counterparts. Yet, the toxicology of chemical mixtures has been overlooked. This work aims at assessing and comparing viability and cell cycle of A549 cells after exposure to single and binary mixtures of: titanium dioxide nanoparticles (TiONP) 0.

Remediation of arsenic from contaminated seawater using manganese spinel ferrite nanoparticles: Ecotoxicological evaluation in Mytilus galloprovincialis.

In the last decade different approaches have been applied for water remediation purposes, including the use of nanoparticles (NPs) to remove metals and metalloids from water. Although studies have been done on the toxic impacts of such NPs, very scarce information is available on the impacts of water after decontamination when discharged into aquatic environments. As such, in the present study we aimed to evaluate the ecotoxicological safety of seawater previously contaminated with arsenic (As) and remediated by using manganese-ferrite (MnFeO-NPs) NPs.

Reliable quantification of mercury in natural waters using surface modified magnetite nanoparticles.

Reliable determination of mercury (Hg) in natural waters is a major analytical challenge due to its low concentration and to the risk of Hg losses or contamination during sampling, storage and pre-treatment of samples. The present work proposes a simple, efficient, sensitive and easy-handling methodology for extraction, pre-concentration and quantification of total dissolved mercury in natural waters, using iron oxide nanoparticles (NPs) coated with silica shells functionalized with dithiocarbamate groups (FeO@SiOSiDTC). Ten mg L of these NPs were sufficient to remove 83-97% of 500 to 10 ng L of Hg in ultra-pure water and artificial seawater, used as model Hg solutions, within 24 h.

Mercury in river, estuarine and seawaters - Is it possible to decrease realist environmental concentrations in order to achieve environmental quality standards?

Dithiocarbamate-functionalized magnetite nanoparticles (FeO@SiO/SiDTC) have been investigated as a convenient and effective sorbent for mercury removal from river, estuarine and sea waters, and their capability to decrease realistic environmental concentrations to the new environmental quality standards was evaluated. The sorption kinetics was well described by the Elovich model and the initial sorption rate was dependent of the sorbent dose. Except for river water sample, the FeO@SiO/SiDTC particles uptake 99.

Remediation of mercury contaminated saltwater with functionalized silica coated magnetite nanoparticles.

The study aimed to evaluate the efficiency of dithiocarbamate functionalized silica coated magnetite nanoparticles (NPs) for Hg decontamination of saltwater either contaminated with Hg alone or with As and Cd. For this, the residual levels of Hg in seawater were assessed and Hg-contaminated or Hg+As+Cd-contaminated seawater toxicity to aquatic biota, before and after the sorption process, was compared. The results showed that under highly competitive conditions (water salts, Cd and As), the removal of Hg from seawater, by using these magnetic NPs, for the lowest concentration (50μg/L) was superior to 98% and for the highest concentration (500μg/L) ranged between 61% to 67%.

Ferromagnetic sorbents based on nickel nanowires for efficient uptake of mercury from water.

This work reports the preparation of ferro-magnetic nickel nanowires (NiNW) coated with dithiocarbamate-functionalized siliceous shells and its application for the uptake of aqueous Hg(II) ions by magnetic separation. NiNW with an average diameter and length of 35 nm and 5 μm, respectively, were firstly prepared by Ni electrodeposition in an anodic aluminum oxide template. The NiNW surfaces were then coated with siliceous shells containing dithiocarbamate groups via a one-step procedure consisting in the alkaline hydrolytic co-condensation of tetraethoxysilane (TEOS) and a siloxydithiocarbamate precursor (SiDTC).

Competitive effects on mercury removal by an agricultural waste: application to synthetic and natural spiked waters.

In this work, the efficiency of a local and highly, available agricultural waste, the raw rice husk, was used to remove mercury (Hg) from synthetic and natural waters, spiked with concentrations that reflect the contamination problems found in the environment. Different operating conditions were tested, including initial pH, ionic strength, the presence of co-ions (cadmium) and organic matter. The sorption efficiency of rice husk was slightly affected by the presence H+ ions (pH range between 3 and 9), but in the presence of NaNO3 and NaCl electrolytes and in binary solutions containing Cd2+ and H2+, the sorption efficiency was dependent on the nature and levels of the interfering ion and on the initial concentration of Hg+ used.

Cork stoppers as an effective sorbent for water treatment: the removal of mercury at environmentally relevant concentrations and conditions.

The technical feasibility of using stopper-derived cork as an effective biosorbent towards bivalent mercury at environmentally relevant concentrations and conditions was evaluated in this study. Only 25 mg/L of cork powder was able to achieve 94 % of mercury removal for an initial mercury concentration of 500 μg/L. It was found that under the conditions tested, the efficiency of mercury removal expressed as equilibrium removal percentage does not depend on the amount of cork or its particle size, but is very sensitive to initial metal concentration, with higher removal efficiencies at higher initial concentrations.

Fluorescent Magnetic Bioprobes by Surface Modification of Magnetite Nanoparticles.

Bimodal nanoprobes comprising both magnetic and optical functionalities have been prepared via a sequential two-step process. Firstly, magnetite nanoparticles (MNPs) with well-defined cubic shape and an average dimension of 80 nm were produced by hydrolysis of iron sulfate and were then surface modified with silica shells by using the sol-gel method. The Fe₃O₄@SiO₂ particles were then functionalized with the fluorophore, fluorescein isothiocyanate (FITC), mediated by assembled shells of the cationic polyelectrolyte, polyethyleneimine (PEI).