Hydrophilic ionic liquid assisted hydrothermal synthesis of ZnO nanostructures with controllable morphology.

Nanostructured ZnO with controllable morphology was prepared by a hydrothermal method in the presence of three different hydrophilic ionic liquids (ILs), 1-ethyl-3-methylimidazolium methylsulfate, ([Cmim]CHSO), 1-butyl-3-methylimidazolium methylsulfate, ([Cmim]CHSO) and 1-ethyl-3-methylimidazolium ethylsulfate, ([Cmim]CHSO) as soft templates. The formation of ZnO nanoparticles (NPs) with and without IL was verified using FT-IR and UV-visible spectroscopy. X-ray diffraction (XRD) and selected area electron diffraction (SAED) patterns indicated the formation of pure crystalline ZnO with a hexagonal wurtzite phase.

Cellulose-based hydrogels towards an antibacterial wound dressing.

Hydrogels are promising candidates for wound healing bandages because they can mimic the native skin microenvironment. Additionally, there is increasing growth in the use of naturally derived materials and plant-based biomaterials to produce healthcare products with healing purposes because of their biocompatibility and biodegradation properties. In this study, cellulose extracted from biodiverse sources in Ecuador was used as the raw material for the fabrication of hydrogels with enhanced antifouling properties.

Aloe Vera Functionalized Magnetic Nanoparticles Entrapped Ca Alginate Beads as Novel Adsorbents for Cu(II) Removal from Aqueous Solutions.

CABs (Ca alginate beads), AVCABs (Aloe vera Ca alginate beads), and AVMNCABs (Aloe-vera functionalized magnetic nanoparticles entrapped Ca alginate beads) were developed as adsorbents for the removal of Cu(II) from aqueous solutions. The materials were characterized using Fourier-transform infrared (FTIR) spectroscopy, high-resolution scanning electron microscopic (HR-SEM) analysis, X-ray diffraction (XRD), energy-dispersive X-ray (EDX) spectroscopy, and a vibrating-sample magnetometer (VSM). The effect of several parameters, such as pH, time, temperature, adsorbent dose, etc.

Potentialities of bioinspired metal and metal oxide nanoparticles in biomedical sciences.

To date, various reports have shown that metallic gold bhasma at the nanoscale form was used as medicine as early as 2500 B.C. in India, China, and Egypt.

Potentialities of graphene and its allied derivatives to combat against SARS-CoV-2 infection.

Graphene is a two-dimensional material with sp hybridization that has found its broad-spectrum potentialities in various domains like electronics, robotics, aeronautics, etc.; it has recently gained its utilities in the biomedical domain. The unique properties of graphene and its derivatives of graphene have helped them find their utilities in the biomedical domain.

Methionine-Functionalized Graphene Oxide/Sodium Alginate Bio-Polymer Nanocomposite Hydrogel Beads: Synthesis, Isotherm and Kinetic Studies for an Adsorptive Removal of Fluoroquinolone Antibiotics.

In spite of the growing demand for new antibiotics, in the recent years, the occurrence of fluoroquinolone antibiotics (as a curative agent for urinary tract disorders and respiratory problems) in wastewater have drawn immense attention. Traces of antibiotic left-overs are present in the water system, causing noxious impact on human health and ecological environments, being a global concern. Our present work aims at tackling the major challenge of toxicity caused by antibiotics.

Adsorption of cationic dyes, drugs and metal from aqueous solutions using a polymer composite of magnetic/β-cyclodextrin/activated charcoal/Na alginate: Isotherm, kinetics and regeneration studies.

In this work, we successfully synthesized novel polymer gel beads based on functionalized iron oxide (Fe3O4), activated charcoal (AC) particles with β-cyclodextrin (CD) and sodium alginate (SA) polymer (Fe3O4/CD/AC/SA), by a simple, reproducible and inexpensive method. These beads proved to be versatile and strong adsorbents with magnetic properties and high adsorption capacity. The composites were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, vibrating sample magnetometry, adsorption at -196 °C, high resolution transmission electron microscopy, thermogravimetric analysis and point of zero charge measurements.

Sensing Ability of Ferroelectric Oxide Nanowires Grown in Templates of Nanopores.

Nanowires of ferroelectric potassium niobate were grown by filling nanoporous templates of both side opened anodic aluminum oxide (AAO) through radiofrequency vacuum sputtering for multisensor fabrication. The precise geometrical ordering of the AAO matrix led to well defined single axis oriented wire-shaped material inside the pores. The sensing abilities of the samples were studied and analyzed in terms of piezoelectric and pyroelectric response and the results were compared for different length of the nanopores (nanotubes)-1.

Cationic Dye Removal Using Novel Magnetic/Activated Charcoal/β-Cyclodextrin/Alginate Polymer Nanocomposite.

New magnetic iron oxide (FeO)/activated charcoal (AC)/β-cyclodextrin (CD)/sodium alginate (Alg) polymer nanocomposite materials were prepared by direct mixing of the polymer matrix with the nanofillers. The obtained materials were utilized as nano-adsorbents for the elimination of methylene blue (MB), a hazardous water-soluble cationic dye, from aqueous solutions, and showed excellent regeneration capacity. The formation of the nanocomposites was followed by high-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectrometry (EDX), Fourier-transform infrared spectroscopy (FTIR), vibrating sample magnetometer (VSM), X-ray diffraction (XRD) and adsorption of N at -196 °C.

Chloramine-T/N-Bromosuccinimide/FeCl/KIO Decorated Graphene Oxide Nanosheets and Their Antibacterial Activity.

In this work, we report the synthesis of graphene oxide nanosheets (GO NS) using four different oxidants, namely, chloramine-T (CAT), FeCl, -bromosuccinimide (NBS), and KIO. Fourier transform infrared spectroscopy (FTIR) was used to characterize the functional groups present in the synthesized GO. The microstructure analysis was performed using X-ray diffraction (XRD) and scanning electron microscopy (SEM) to investigate the morphology of GO.

Tailored Engineering of Bimetallic Plasmonic Au@Ag Core@Shell Nanoparticles.

A distinctive synthetic method for the efficient synthesis of multifunctional bimetallic plasmonic Au@Ag core@shell nanoparticles (NPs) with tunable size, morphology, and localized surface plasmon resonance (LSPR) using Triton X-100/hexanol-1/deionized water/cyclohexane-based water-in-oil (W/O) microemulsion (ME) is described. The W/O ME acted as a "true nanoreactor" for the synthesis of Au@Ag core@shell NPs by providing a confined and controlled environment and suppressing the nucleation, growth, agglomeration, and aggregation of the NPs. High-resolution transmission electron microscopic analysis of the synthesized Au@Ag core@shell NPs revealed an "unusual core@shell" contrast, and the selected area electron diffraction and Moiré patterns showed that Au layers are paralleled to Ag layers, thus indicating the formation of Au@Ag core@shell NPs.

Kinetics and mechanism of Ru(III) and Hg(II) co-catalyzed oxidation of D-galactose and D-ribose by N-bromoacetamide in perchloric acid.

Kinetics of oxidation of reducing sugars D-galactose (Gal) and D-ribose (Rib) by N-bromoacetamide (NBA) in the presence of ruthenium(III) chloride as a homogeneous catalyst and in perchloric acid medium, using mercuric acetate as a scavenger for Br(minus sign) ions, as well as a co-catalyst, have been investigated. The kinetic results indicate that the first-order kinetics in NBA at lower concentrations tend towards zero order at its higher concentrations. The reactions follow identical kinetics, being first order in the [sugar] and [Ru(III)].