98%
921
2 minutes
20
This study investigates and discusses the thread crimp in the jacquard woven two-dimensional (2D) fabrics. The study of thread crimp is important for technologists and weavers from a practical point of view, as it has a considerable influence on the behavior of the fabric during weaving on the weaving machine, and subsequently in the finishing process. The basis of the study is the creation of an analytical approach that allows estimating the thread crimp before weaving. The crimp of threads as well as waviness of yarn in a jacquard fabric is influenced by the complexity of the input image and the chosen weave combination. The thread transition parameter was introduced for prediction. The parameter responds both to changes in areas in the input image and to changes in the interlacing in the weave. An algorithm has been built in the ProTkaTex software that records the transition of both warp and weft threads in the pattern's weave. The theoretical predicted values of thread crimp in jacquard fabrics were compared with experimentally obtained values. Two conclusions are evident from the results, the first is that the presented model is applicable for estimating crimp threads in jacquard fabric, and the introduced parameter of thread transitions in the jacquard fabric pattern can respond to pattern change. The results show that the crimp value of the threads increases with the increasing number of transitions. In this study, two methods are used for the experimental analysis of crimp threads in jacquard fabric. Finally, their advantages and disadvantages in relation to jacquard fabric are discussed.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC12361554 | PMC |
http://dx.doi.org/10.1038/s41598-025-15897-7 | DOI Listing |
Sci Rep
August 2025
Department of Technologies and Structures, Technical University of Liberec, Liberec, Czech Republic.
This study investigates and discusses the thread crimp in the jacquard woven two-dimensional (2D) fabrics. The study of thread crimp is important for technologists and weavers from a practical point of view, as it has a considerable influence on the behavior of the fabric during weaving on the weaving machine, and subsequently in the finishing process. The basis of the study is the creation of an analytical approach that allows estimating the thread crimp before weaving.
View Article and Find Full Text PDFFront Phys
June 2023
School of Physics, Georgia Institute of Technology, Atlanta, GA, United States.
Sovrem Tekhnologii Med
May 2023
Professor, Corresponding Member of the Russian Academy of Sciences, General Director; E.N. Meshalkin National Research Medical Center of the Russian Ministry of Health, 15 Rechkunovskaya St., Novosibirsk, 630055, Russia.
Unlabelled: is to determine physical and structural properties of woven synthetic prostheses depending on the type of the weave.
Materials And Methods: Ten vascular prostheses manufactured at the Science and Technology Park of the BNTU "Polytechnic" (Minsk, Republic of Belarus) have been analyzed. The prostheses differed in the type of weaving, duration and temperature of thermal fixation during crimping.
ACS Appl Mater Interfaces
January 2021
Wilson College of Textiles, North Carolina State University, Raleigh, North Carolina 27606, United States.
In different mechanical conditions, repetitive friction in combination with pressure, shear, temperature, and moisture leads to skin discomfort and imposes the risks of developing skin injuries such as blisters and pressure ulcers, frequently reported in athletes, military personnel, and in people with compromised skin conditions and/or immobility. Textiles next to skin govern the skin microclimate, have the potential to influence the mechanical contact with skin, and contribute to skin comfort and health. The adhesion-friction theory suggests that contact area is a critical factor to influence adhesion, and therefore, friction force.
View Article and Find Full Text PDFMaterials (Basel)
November 2018
Henry Moseley X-ray Imaging Facility, Henry Royce Institute for Advanced Materials, School of Materials, University of Manchester, M13 9PL Manchester, UK.
Understanding the fatigue damage mechanisms in composite materials is of great importance in the wind turbine industry because of the very large number of loading cycles rotor blades undergo during their service life. In this paper, the fatigue damage mechanisms of a non-crimp unidirectional (UD) glass fibre reinforced polymer (GFRP) used in wind turbine blades are characterised by time-lapse ex-situ helical X-ray computed tomography (CT) at different stages through its fatigue life. Our observations validate the hypothesis that off-axis cracking in secondary oriented fibre bundles, the so-called backing bundles, are directly related to fibre fractures in the UD bundles.
View Article and Find Full Text PDF