98%
921
2 minutes
20
An increasing number of human fMRI studies aim to discern the time delays between evoked responses under different stimuli conditions in different brain regions. To achieve that, a primary goal is to acquire fMRI data with high sampling rates. This task is now possible with ultra-high field (≥7 T) MRI and the advancement of imaging acceleration methods. Consequently, it becomes imperative to understand what is the actual or effective temporal resolution (ETR) that is realized in given settings of an fMRI experiment. In this study, we utilized a dynamic phantom to reliably repeat a set of scans, generating a "ground truth" signal with controllable onset delays mimicking fMRI responses in a task-based block-designed fMRI. Here, we define the ETR and quantify a scan's ETR using the dynamic phantom. The quantification was performed for various scanning parameters, including echo time (TE), repetition time (TR), voxel size, and contrast-to-noise ratio (CNR). We further show that combining data from multi-echo EPI can improve the ETR (i.e., reduce it). In addition, parameters of the fMRI paradigm were examined, including the blocks' length and density. As tissue properties (e.g., level of iron deposition) affect the CNR and thus change the ETR, we examined the signal rise mimicking not only the cortex, but also the basal ganglia (known for its high iron deposition). Combining multi-echo data, the estimated ETR for the examined scans was 151 ms for a cortex-mimicking setup and 248 ms for a basal ganglia-mimicking setup, when scanning with a sampling time (i.e., TR) of 600 ms. Yet, a substantial penalty was paid when the CNR was low, in which case the ETR was even larger than the TR. A feasibility set of experiments was also designed to evaluate how the ETR is affected by physiological signal fluctuations and the variability of the hemodynamic response. This study shows the viability of studying time responses with fMRI, by demonstrating that a very short ETR can be achieved. However, it also emphasizes the need to examine the attainable ETR for a particular experiment.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC12290576 | PMC |
http://dx.doi.org/10.1162/imag_a_00309 | DOI Listing |
Med Phys
September 2025
Division of Medical Radiation Physics and Department of Radiation Oncology, Inselspital, Bern University Hospital and University of Bern, Bern, Switzerland.
Background: Radiotherapy workflows conventionally deliver one treatment plan multiple times throughout the treatment course. Non-coplanar techniques with beam angle optimization or dosimetrically optimized pathfinding (DOP) exploit additional degrees of freedom to improve spatial conformality of the dose distribution compared to widely used techniques like volumetric-modulated arc therapy (VMAT). The temporal dimension of dose delivery can be exploited using multiple plans (sub-plans) within one treatment course.
View Article and Find Full Text PDFPLoS One
September 2025
Department of Radiation Oncology, Yonsei Cancer Center, Heavy Ion Therapy Research Institute, Yonsei University College of Medicine, Seoul, Korea.
Volumetric modulated arc therapy (VMAT) for lung cancer involves complex multileaf collimator (MLC) motion, which increases sensitivity to interplay effects with tumour motion. Current dynamic conformal arc methods address this issue but may limit the achievable dose distribution optimisation compared with standard VMAT. This study examined the clinical utility of a VMAT technique with monitor unit limits (VMATliMU) to mimic conformal arc delivery and reduce interplay effects while maintaining plan quality.
View Article and Find Full Text PDFMAGMA
September 2025
Institute of Diagnostic and Interventional Radiology, School of Medicine and Health, Technical University of Munich, Munich, Germany.
Purpose: To enable accelerated Bloch simulations by enhancing the open-source multi-purpose MRI simulation tool JEMRIS with graphic processing units (GPU) parallelization.
Methods: A GPU-compatible version of JEMRIS was built by shifting the computationally expensive parallelizable processes to the GPU to benefit from heterogeneous computing and by adding asynchronous communication and mixed precision support. With key classes reimplemented in CUDA C++, the developed GPU-JEMRIS framework was tested on simulations of common MRI artifacts in numerical phantoms.
J Appl Clin Med Phys
September 2025
Department of Radiology, University of Kentucky, Lexington, Kentucky, USA.
Background: Digital dynamic radiography (DDR), integrated into Konica Minolta's portable mKDR system, provides dynamic imaging for pulmonary, orthopedic, and interventional applications. While DDR is not classified as fluoroscopy, its use of pulsed x-rays for cine-like image sequences raises concerns about radiation exposure and shielding, particularly given the absence of a primary beam stop, high output capabilities, and increasing clinical adoption.
Purpose: To characterize the primary and scatter radiation output of a DDR system and compare it against commonly used mobile C-arm fluoroscopy units, and to evaluate shielding requirements and potential occupational exposure risks associated with DDR use.
Phys Med
September 2025
School of Physics, Chemistry and Earth Sciences, The University of Adelaide, Adelaide, South Australia, Australia; Australian Bragg Centre for Proton Therapy and Research, Adelaide, South Australia, Australia.
Background: The use of patient-specific apertures in pencil beam scanning (PBS) proton therapy improves target conformity but increases secondary neutron production and induces aperture activation. While brass is commonly used for apertures, Cerrobend and tungsten carbide may offer cost-effective alternatives.
Purpose: This study evaluates the viability of Cerrobend and tungsten carbide for PBS apertures by examining secondary neutron production and activation using Tool for Particle Simulation (TOPAS).