98%
921
2 minutes
20
The emission of volatile organic compounds (VOCs) from brake wear is a relatively underexplored aspect of nonexhaust traffic emissions. We employed a proton-transfer-reaction time-of-flight mass spectrometer to investigate the real-time emissions of VOCs from two commercially prevalent brake materials: low-metallic copper-free (LMCF) and nonasbestos organic (NAO). Experiments were conducted using a pin-on-a-disc tribometer integrated with a fast-mobility particle sizer spectrometer. The results reveal that NAO brake pads emit higher concentrations of VOCs than LMCF pads. Over 200 different sum formulas were identified for both materials, and siloxanes were observed as characteristic of NAO emissions. The ultrafine particle formation was systematically preceded by an increase in gaseous emissions. This observation supports the thesis that ultrafine particle formation emitted by brake wear occurs through VOCs nucleation, addressing a significant gap in the literature.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC12261270 | PMC |
http://dx.doi.org/10.1021/acsestair.5c00070 | DOI Listing |
PLoS One
September 2025
Department of Industrial Engineering, College of Engineering, King Saud University, Riyadh, Saudi Arabia.
The increasing concern over environmental pollution from brake dust and the adverse impacts of conventional brake pad materials, such as metallic, semi-metallic, and ceramic composites, has prompted the exploration of more sustainable alternatives. Traditional brake pads release harmful non-exhaust emissions that contribute to air pollution and wear down quickly, posing both environmental and operational challenges. This study investigates the development and performance evaluation of polymer friction composites enhanced with natural friction modifiers sourced from agricultural waste materials like walnut shell, coconut shell, and groundnut shell powders.
View Article and Find Full Text PDFEnviron Sci Technol
September 2025
Department of Chemistry & Chemical Biology, McMaster University, Hamilton, Ontario L8S 4M1, Canada.
Road dust, which consists of brake and tire wear, pavement particles, crustal material, semivolatile vehicle exhaust components, and natural organic matter, can contribute to both airborne particulate matter and urban runoff. To date, research has mainly focused on the health impact of road dust, but little work has been conducted to characterize its role as a reactive surface in the environment. Our group has previously shown that illuminated road dust is a source of singlet oxygen, an important environmental oxidant.
View Article and Find Full Text PDFEnviron Sci Technol
September 2025
Department of Chemical Engineering and Applied Chemistry, University of Toronto, Toronto, Ontario M5S 3E5, Canada.
Atmospheric nanoplastic particles (NPPs) are an emerging environmental concern due to their potential adverse effects on human and ecosystem health. Many recently identified sources involve subjecting plastic materials to elevated temperatures; however, fundamental understanding of airborne emissions is limited. This study is the first systematic characterization of particle and volatile organic compound emissions from plastic smoldering combustion.
View Article and Find Full Text PDFSci Rep
September 2025
Manufacturing and Production Engineering Dept, Modern Academy for Engineering and Technology, Cairo, Egypt.
This study evaluates the performance of three powder metallurgy-based brake pad formulations (BP1, BP2, and BP3) by examining mass loss, hardness, braking force, coefficient of friction (COF), noise, and vibration under 5 and 8 bar pressures. BP1 exhibited the highest braking force (640.99 N) and COF (0.
View Article and Find Full Text PDFSensors (Basel)
August 2025
Optics Division, National Institute of Metrology, Beijing 100029, China.
To address the growing need for field calibration of the optical properties of pedestrian targets used in autonomous emergency braking (AEB) tests, a novel three-dimensional multi-faceted standard body (TDMFSB) was developed. A camera-based analytical algorithm was proposed to evaluate the bidirectional reflectance distribution function (BRDF) characteristics of pedestrian targets. Additionally, a field calibration method applied in AEB testing scenarios (CPFAO and CPLA protocols) on one new and one aged typical pedestrian target of the same type revealed a 21% decrease in the BRDF uniformity of the aged target compared to the new one, confirming optical degradation due to repeated "crash-scatter-reassembly" cycles.
View Article and Find Full Text PDF