Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
Organic-inorganic lead halide perovskite solar cells (PSCs) have presented promising improvements within recent years due to the superior photophysical properties of perovskites. The efficiency of PSCs is closely related to the quality of the of the perovskite film. Additive engineering is an effective strategy to regulate the crystallization of perovskite film. Therefore, in this work, we introduce methylammounium chloride (MACl) into a perovskite precursor as an additive to improve the crystallization of perovskite film and to suppress the formation of defects to achieve high-performance PSCs. By meticulously investigating and studying the influence of different percentages of MACl additives on perovskite film quality, we obtain that the best amount of incorporated MACl is 10%. Thanks the employment of the optimal amount of MACl, the perovskite film shows a significantly improved morphology with larger grains, a smoother surface, and suppressed defects. Finally, the target PSCs with the addition of 10% MACl present the highest PCE of 23.61%, which is much higher than the value (16.72%) of the control device.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11858799 | PMC |
| http://dx.doi.org/10.3390/nano15040292 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
UVA/B-Selective Skin-Inspired Nociceptors Based on Green Double Perovskite QDs-Sensitized 2D Semiconductor toward Reliable Human Somatosensory System Simulation.
J Phys Chem Lett
September 2025
Tianjin Key Laboratory of Film Electronic and Communication Devices, School of Integrated Circuit Science and Engineering, Tianjin University of Technology, Tianjin 300384, China.
Achieving UVA/B-selective, skin-inspired nociceptors with perception and blockade functions at the single-unit device level remains challenging. This is because the device necessitates distinct components for every performance metric, thereby leading to complex preparation processes and restricted performance, as well as the absence of deep UV (UVB and below)-selective semiconductors. Here, to address this, we develop a structure-simplification skin-inspired nociceptor using a reverse type-II CuAgSbI/MoS heterostructure.
View Article and Find Full Text PDFDiverse Perovskite Solar Cells: Progress, Challenges, and Perspectives.
Adv Mater
September 2025
School of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou, 510006, China.
Perovskite materials have revolutionized optoelectronics by virtue of their tunable bandgaps, exceptional optoelectronic properties, and structural flexibility. Notably, the state-of-the-art performance of perovskite solar cells has reached 27%, making perovskite materials a promising candidate for next-generation photovoltaic technology. Although numerous reviews regarding perovskite materials have been published, the existing reviews generally focus on individual material systems (e.
View Article and Find Full Text PDFMolecular Extrusion Drives Polymer Dynamic Soft Encapsulation to Inhibit Lead Leakage for Efficient Inverted Perovskite Solar Cells and Modules.
Adv Mater
September 2025
School of Physical Science and Technology, College of Energy, School of Optoelectronic Science and Engineering, Soochow University, Suzhou, 215000, P. R. China.
Polymer additives exhibit unique advantages in suppressing lead leaching from perovskite solar cells (PSCs). However, polymers tend to excessively aggregate in the perovskite film, which hinders comprehensive encapsulation and disrupts charge transport efficiency, degrading lead leakage inhibition and device performance. Herein, a polymer dynamic soft encapsulation strategy driven by molecular extrusion is introduced to mitigate lead leakage in PSCs, achieved through the incorporation of poly(propylene adipate) (PPA) as a multifunctional additive in the perovskite formulation.
View Article and Find Full Text PDFHydrogen-Bond-Directed Chirality Transfer in Helical Polyacetylene-Perovskite-PDMS Elastomeric Films for Stretching-Tunable Multicolor Circularly Polarized Luminescence.
ACS Appl Mater Interfaces
September 2025
State Key Laboratory of Chemical Resource Engineering, Beijing 100029, China.
Circularly polarized luminescence (CPL) has emerged as a critical technology for anticounterfeiting and optical display applications due to its unique chiroptical properties. We report a multicolor CPL-emitting elastomeric film (P37/PSK@SiO-PDMS) that synergistically combines chiral helical polyacetylene (P37) and a surface-engineered perovskite (PSK@SiO) through hydrogen-bond-directed assembly. Confinement within the PDMS matrix drives P37 to self-assemble into a chiral supramolecular structure through hydrogen bonding, inducing a chiroptical inversion.
View Article and Find Full Text PDFLevetiracetam-Assisted Perovskite Crystallization and Tripartite Lead Iodide Reduction in Perovskite Solar Cells.
Adv Mater
September 2025
Key Lab of Artificial Micro- and Nano-Structures of Ministry of Education of China, School of Physics and Technology, Wuhan University, Wuhan, 430072, China.
Sequential deposition technique is widely used to fabricate perovskite films with large grain size in perovskite solar cells (PSCs). Residual lead halide (PbI) in the perovskite film tends to be decomposed into metallic lead (Pb) under long-term heating or light soaking. Here, a chiral levetiracetam (LEV) dopant containing α-amide and pyrrolidone groups is introduced into the PbI precursor solution.
View Article and Find Full Text PDF