98%
921
2 minutes
20
This study investigates the effects of varying exhaust gas recirculation (EGR) rates and temperatures on the combustion and emissions characteristics of a compression ignition engine fueled with hydrotreated vegetable oil (HVO). Understanding these effects is essential for optimizing renewable fuel applications in compression ignition engines, contributing to cleaner combustion, and supporting sustainable transportation initiatives. The experiments revealed that increasing the EGR rate to 20% not only reduces NOx emissions by approximately 25% but also increases smoke by around 15%, highlighting a trade-off between NOx and particulate matter control. When EGR temperature is increased from 130 to 220 °C, NOx emissions rise by about 10%, accompanied by a 12% increase in smoke emissions, indicating that elevated EGR temperatures can counteract the NOx-reducing benefits of EGR by raising the overall combustion temperature. Additionally, a higher EGR rate shifts particle size distributions, reducing nucleation mode particles by about 30% while increasing accumulation mode particles, with peak concentrations moving toward larger diameters. These findings suggest that precise control of EGR parameters is essential for optimizing emissions performance and ensuring the feasibility of HVO as an alternative fuel in compression ignition engines.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11755148 | PMC |
http://dx.doi.org/10.1021/acsomega.4c08533 | DOI Listing |
ACS Omega
August 2025
Institute of Research and Development, Ethiopian Defence University, Bishoftu, P.O. Box 27789/1000 27789/1000, Ethiopia.
With growing concerns over fossil fuel depletion, environmental pollution, and the need for sustainable energy solutions, alternative renewable fuels have gained significant attention in the transportation sector. Biodiesel and ethanol are promising biofuels that can reduce dependence on conventional diesel and lower harmful emissions. However, challenges such as fuel compatibility and combustion inefficiencies limit their widespread adoption in compression ignition engines.
View Article and Find Full Text PDFPhys Rev Lett
August 2025
Lawrence Livermore National Laboratory, Livermore, California 94551, USA.
This Letter details the role of reduced hydrodynamic mix in achieving the first fusion plasma to satisfy the Lawson criterion for ignition. Using novel 3D measurements of the temperature and density of the burning deuterium-tritium plasma across a series of experiments, we demonstrate that hydrodynamic mixing from small-scale capsule defects was a key degradation mechanism inhibiting ignition. A series of five layered deuterium-tritium experiments using 1.
View Article and Find Full Text PDFSci Rep
August 2025
Faculty of Mechanical Engineering, Jimma Institute of Technology, Jimma University, P.O. Box. 378, Jimma, Ethiopia.
The present work explores the synergistic impact of mullite-based thermal barrier coatings (TBCs) and varying compression ratios (CRs) on the performance, combustion, and emission behavior of a single-cylinder, four-stroke variable compression ratio (VCR) diesel engine operated with Scum Oil Methyl Ester (SOME) diesel fuel blends. Mullite ceramic (3AlO·2SiO) was applied via plasma spraying onto engine components including the piston crown, cylinder head, and intake/exhaust valves to minimize thermal losses. Experimental tests were carried out at CRs of 16.
View Article and Find Full Text PDFSci Rep
August 2025
Department of Physics, Saveetha School of Engineering, SIMATS, Saveetha University, Chennai, Tamilnadu, India.
Energy resource sustainability has been of critical concern as a result of unlimited energy demand worldwide. In this research work, extraction of the alternate fuel for diesel (i.e.
View Article and Find Full Text PDFSci Rep
August 2025
Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai, 600036, India.
The utilization of thermodynamics-based modeling emerged as a valuable technique to simulate various complex phenomena and their interactions occurring in a thermodynamic system. This paper presents a thermodynamics-based modeling approach aimed at simplifying the understanding and simulation of various in-cylinder phenomena in spark ignition engines. These phenomena include gas exchange, compression and expansion processes, heat transfer from cylinder walls, combustion, emission formation, mixture composition, properties calculation and frictional losses, which collectively impact the overall engine performance.
View Article and Find Full Text PDF