Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Bed bugs are considered a major public health problem in industrialized countries. Usually, bed bug infestations are managed using a combination of physical and chemical methods. In recent years, new strategies for bed bug control have emerged, particularly the use of dusts like diatomaceous earth and silicon dioxide. However, in Europe, the use of silicon dioxide is restricted to professional, while diatomaceous earth can be harmful to the lungs. This study aimed to assess bed bug mortality rates associated with Sommières earth, green clay, talc, and sodium bicarbonate compared to silicon dioxide and diatomaceous earth from a pest management company, diatomaceous earth for litter conditioner, and diatomaceous earth from a supermarket. We tested permanent exposure, short exposure, horizontal transfer and repellent effect on two bed bug colonies. Sommières earth demonstrated efficacy ranging from 75% to 100% in permanent and short exposures, similar to the efficacy of diatomaceous earth from the pest management company. On the contrary, diatomaceous earth for litter conditioner and diatomaceous earth from a supermarket, green clay, talc, and sodium bicarbonate were found to be ineffective. This study demonstrates, for the first time, the efficacy of Sommières earth against bed bugs, but also highlights the variability in efficacy of diatomaceous earths on bed bugs depending on their quality.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC11271705PMC
http://dx.doi.org/10.1051/parasite/2024040DOI Listing

Publication Analysis

Top Keywords

diatomaceous earth
36
bed bug
20
silicon dioxide
16
sommières earth
16
earth
13
bed bugs
12
diatomaceous
10
bed
8
bug control
8
dioxide diatomaceous
8

Similar Publications

Dry silica dust-based products for management of ixodids.

Vet Parasitol

August 2025

USDA-ARS, Knipling-Bushland U S. Livestock Insects Research Laboratory, Kerrville, TX 78028, United States. Electronic address:

Ixodids transmit a variety of disease-causing agents that afflict humans, livestock, companion animals, and wildlife, as well as reducing meat and milk yields, reproduction, hide quality, and occasionally inducing death from exsanguination. While the primary control tactic has been application of conventional synthetic acaricides, resistance to many of those products has occurred among various ixodid species. This development has instigated searches for alternative control tactics, such as growth regulators, bioactive animal and botanical substances, vaccines, biological control, and silica-based dusts.

View Article and Find Full Text PDF

In recent years, the use of supplementary cementitious materials (SCMs) in building materials has increased due to concerns about CO emissions from the cement industry. On the other hand, the scarcity of traditional sources of SCMs in certain regions exacerbates the issue of high demand for these materials in concrete production. In this context, this article explores the chemical, mineralogical, morphological, and physical properties and pozzolanic activity of two types of diatomaceous earth (DE) obtained from industrial waste and by-products.

View Article and Find Full Text PDF

Stevioside, a natural high-intensity sweetener, is widely employed across the food, pharmaceutical, and daily chemical industries due to its intense sweetness and health benefits. However, traditional extraction and purification processes for steviol glycosides from are plagued by low efficiency, high energy consumption, substantial environmental impact, and inconsistent product quality. This study systematically optimized the extraction, decolorization, decontamination, and desalting processes to overcome these challenges.

View Article and Find Full Text PDF

Polylactide (PLA) that is reinforced with diatomaceous earth (DE) is a promising and eco-friendly material with high engineering potential. This article provides a comprehensive overview of various PLA types and processing methods for PLA + DE composites. This study aimed to determine the mechanical strength limits of PLA + DE composites using two PLA grades-amorphous PLE 005-A and semi-crystalline Ingeo 4043D-that are each filled with Perma-Guard DE 5, 10, and 15% by weight, and two manufacturing methods, injection molding (IM) and additive manufacturing (3DP), using fused filament fabrication (FFF).

View Article and Find Full Text PDF

This study examines the effects of an emulsion gel (EG) and a fat bulking agent (BA), both formulated with pork lard (PL) and an alginate-based gelling system, as animal fat replacers in the reformulation of reduced-fat fresh pork sausages. Both fat analogs were characterized in terms of texture, color, and in vitro gastrointestinal digestion (GID) before being used in the reformulation of four fresh pork sausages, without and with added silicon (Si) from diatomaceous earth powder: S/EG, S/EG-Si, S/BA, and S/BA-Si. Reduced-fat sausages elaborated exclusively with pork backfat (PB), without and with Si, were used as controls (S/C and S/C-Si).

View Article and Find Full Text PDF