Category Ranking
98%
Total Visits
921
Avg Visit Duration
2 minutes
Citations
20
Article Abstract
Various organic solvents are widely used in the manufacturing, processing, and purification of drug substances, drug products, formulations, excipients, etc. These solvents must be removed to the lowest amount permitted, as they do not possess any therapeutic advantages and may cause undesirable toxicities. Therefore, a rapid and sensitive analytical method for the quantitation of residual solvents is needed. The following chapter presents a static headspace gas chromatographic (HSGC) method for determining the concentration of common residual solvents in various nanoformulations. An efficient and sensitive HSGC method has been developed using PerkinElmer's headspace autosampler/gas chromatographic system with a flame ionization detector (FID) and validated according to the International Conference for Harmonization (ICH) guideline Q3C. The method validation indicates that the method is specific, linear, accurate, precise, and sensitive for the analyzed solvents. The method is suitable for the analysis of 13 residual solvents (methanol, ethanol, acetone, diethyl ether, 2-propanol, acetonitrile, 1-propanol, ethyl acetate, tetrahydrofuran, dichloromethane, chloroform, 1-butanol, and pyridine) and utilizes an Elite 624 Crossbond 6% cyanopropylphenyl, 94% dimethylpolysiloxanes column with helium as a carrier gas.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1007/978-1-0716-3786-9_8 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A Highly Versatile Enantiodifferentiating Polyglutamate Alignment Medium to Measure Residual Dipolar Couplings in Non-Polar and Polar Solvents.
J Am Chem Soc
September 2025
Clemens-Schöpf-Institut für Organische Chemie und Biochemie, Technische Universität Darmstadt, Peter-Grünberg-Str. 16, 64287 Darmstadt, Germany.
Helical structures are ubiquitous in nature and exhibit fascinating properties. They are inherently chiral, and many rely on hydrogen bonds to stabilize their conformation. Homopolypeptides of the glutamate type form α-helical secondary structures and are considered rigid-rod polymers.
View Article and Find Full Text PDFPost-washing using a Soxhlet apparatus improves the mechanical properties and biocompatibility of 3D printing resin in contaminated solvent.
J Mech Behav Biomed Mater
August 2025
Department of Prosthodontics, College of Dentistry, Yonsei University, 50-1 Yonsei-ro, Seodaemun-gu, Seoul, 03722, Republic of Korea. Electronic address:
Photopolymerization-based 3D printing is widely used in dental manufacturing due to its precision and customizability. However, printed resin specimens require effective post-washing to remove unpolymerized resin, which is a critical step that affects both their mechanical properties and biocompatibility. A conventional ultrasonic bath may fail to achieve effective post-washing due to solvent contamination by the residual resin, resulting in incomplete cleaning and possible redeposition.
View Article and Find Full Text PDFTime-Resolved Small-Angle X-Ray Studies of Spherical Micelle Formation and Growth During Polymerization-Induced Self-Assembly in Polar Solvents.
Small
September 2025
South China Advanced Institute for Soft Matter Science and Technology, School of Emergent Soft Matter, Guangdong Provincial Key Laboratory of Functional and Intelligent Hybrid Materials and Devices, Guangdong Basic Research Center of Excellence for Energy and Information Polymer Materials, South Chi
Self-assembled poly(2-dimethylaminoethyl methacrylate)-poly(2-(diisopropylamino)ethyl methacrylate) (PDMA-PDPA) diblock copolymer nanoparticles are widely employed in biological applications, driving the need for a robust and scalable production method. Although polymerization-induced self-assembly (PISA) enables efficient nanoparticle synthesis at high solids content, its research and application to PDMA-PDPA are limited, likely due to kinetic trapping. Leveraging our recently developed generic time-resolved small-angle X-ray scattering (TR-SAXS) approach for PISA in non-polar media, a reversible addition-fragmentation chain transfer-mediated PDMA-PDPA PISA process in polar solvent that produces spherical micelles is examined.
View Article and Find Full Text PDFMicro-mechanism of residual PCE removal from aquifers by in-situ microemulsion: behavior and proportion of mobilization and solubilization.
Water Res
September 2025
School of Mines, China University of Mining & Technology, Xuzhou, 221116, PR China.
In-situ microemulsion has shown great potential for remediation of dense non-aqueous phase liquids (DNAPLs) contaminated aquifers due to the capacity to enhance DNAPL solubility and mobility. Understanding the pore-scale removal behavior of DNAPL and quantifying proportions of mobilization/solubilization in flushing process are essential to improve remediation efficiency. However, owing to the opacity of aquifer medium, the sand columns commonly used in flushing experiments are hard to reveal the dynamic behaviors and removal mechanism of DNAPLs in aquifer by in-situ microemulsion.
View Article and Find Full Text PDFApplication of Isothermal Differential Scanning Calorimetry Equipped with a UV Probe for Photostability Assessment of Pharmaceutical Drugs in the Solid State.
Chem Pharm Bull (Tokyo)
August 2025
Department of Formulation Design and Pharmaceutical Technology, Faculty of Pharmacy, Osaka Medical and Pharmaceutical University, Osaka 569-1094, Japan.
Current methods for evaluating the photostability of pharmaceutical drugs typically separate the irradiation step from the analytical process, making it challenging to observe real-time photodegradation during irradiation. The use of HPLC equipped with UV and/or MS detectors, which are commonly used for quantitative analysis, requires considerable time to establish optimal conditions, and employs organic solvents, which are harmful to both the environment and the analyst. The aim of this study is to investigate the effectiveness of isothermal differential scanning calorimetry (DSC) equipped with a UV probe (photo-DSC) for evaluating the photostability of pharmaceutical drugs in the solid state.
View Article and Find Full Text PDF