98%
921
2 minutes
20
Lithium-rich layered oxides (LRLOs) are one of the most attractive families among future positive electrode materials for the so-called fourth generation of lithium-ion batteries (LIBs). Their electrochemical performance is enabled by the unique ambiguous crystal structure that is still not well understood despite decades of research. In the literature, a clear structural model able to describe their crystallographic features is missing thereby hindering a clear rationalization of the interplay between synthesis, structure, and functional properties. Here, the structure of a specific LRLO, LiMnNiCoAlO, using synchrotron X-ray diffraction (XRD), neutron diffraction (ND), and High-Resolution Transmission Electron Microscopy (HR-TEM), is analyzed. A systematic approach is applied to model diffraction patterns of LiMnNiCoAlO by using the Rietveld refinement method considering the R m and C2/m unit cells as the prototype structures. Here, the relative ability of a variety of structural models is compared to match the experimental diffraction pattern evaluating the impact of defects and supercells derived from the R m structure. To summarize, two possible models able to reconcile the description of experimental data are proposed here for the structure of LiMnNiCoAlO: namely a monoclinic C2/m defective lattice (prototype LiMnO) and a monoclinic defective supercell derived from the rhombohedral R m unit cell (prototype LiCoO).
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1002/smtd.202301466 | DOI Listing |
Chem Commun (Camb)
September 2025
State Key Laboratory of Electrical Insulation and Power Equipment, School of Chemical Engineering and Technology, Xi'an Jiaotong University, No. 28, West Xianning Road, Xi'an 710049, China.
Lithium-rich manganese-based cathode materials Li[LiNiMn]O have received considerable attention. However, severe voltage decay and structural distortion of O3-type layered oxides hinder further practical applications. O2-type layered cathode materials can restrict the movements of transition metals and effectively suppress the voltage decay.
View Article and Find Full Text PDFNano Lett
August 2025
Key Laboratory of Electromagnetic Processing of Materials (Ministry of Education), Northeastern University, Shenyang 110819, China.
Lithium-rich cathode materials (LROs) elicit great interest due to their excellent electrochemical performance and high energy density (>900 Wh kg). Anionic redox (AR) contributes additional capacity to LROs but causes unfavorable structural degradation and oxygen release. Surface oxygen vacancies (Vos) in LROs directly affect anion redox, and the effects of their concentration variations have been reported both positively and negatively in the current studies.
View Article and Find Full Text PDFSci Rep
July 2025
School of Chemistry and Materials Science, Key Laboratory of Resource Chemistry and Eco-environmental Protection in Tibetan Plateau of State Ethnic Affairs Commission, Qinghai Provincial Key Laboratory of Nanomaterials and Nanotechnology, Qinghai Minzu University, Xining, 810007, China. yulongxie201
The material LiAlTi(PO) is a lithium fast ion conductor with three-dimensional ion channels. It exhibits high ionic conductivity, with lithium ion conductivity. To prevent long-term direct contact between LiMnNiCoO material and electrolyte, and avoid HF corrosion of the electrode produced by the decomposition of the electrolyte.
View Article and Find Full Text PDFNanomaterials (Basel)
July 2025
College of Chemistry and Materials Science, Langfang Normal University, 100 Aimin West Road, Langfang 065000, China.
Lithium-rich layered oxide (LLO) has received extensive attention from researchers due to its high initial discharge capacity (≥250 mAh g). However, defects such as its high initial irreversible capacity, voltage decay, and poor rate performance have severely limited its commercialization. These issues arise because the LiMnO component in LLO is activated during the initial cycle, leading to the participation of lattice oxygen anions (O) in redox reactions.
View Article and Find Full Text PDFACS Omega
July 2025
ENFI R&D Institute, China ENFI Engineering Corporation, Beijing 100038, China.
Lithium-rich manganese-based (LRM) materials have emerged as leading contenders for next-generation LIBs, delivering exceptional energy densities (>900 W h kg), while maintaining cost advantages over cobalt-containing alternatives. However, the voltage decay, capacity loss, and life reduction have hindered their further commercialization. Herein, the strategy of using a polyimide/multi-walled carbon nanotubes (PI/MWCNTs) composite coating layer is proposed to optimize the microstructure and enhance the electrochemical properties.
View Article and Find Full Text PDF