Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Programmable photonic integrated circuits (PICs) are emerging as powerful tools for control of light, with applications in quantum information processing, optical range finding, and artificial intelligence. Low-power implementations of these PICs involve micromechanical structures driven capacitively or piezoelectrically but are often limited in modulation bandwidth by mechanical resonances and high operating voltages. Here we introduce a synchronous, micromechanically resonant design architecture for programmable PICs and a proof-of-principle 1×8 photonic switch using piezoelectric optical phase shifters. Our design purposefully exploits high-frequency mechanical resonances and optically broadband components for larger modulation responses on the order of the mechanical quality factor Q while maintaining fast switching speeds. We experimentally show switching cycles of all 8 channels spaced by approximately 11 ns and operating at 4.6 dB average modulation enhancement. Future advances in micromechanical devices with high Q, which can exceed 10000, should enable an improved series of low-voltage and high-speed programmable PICs.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10673894PMC
http://dx.doi.org/10.1038/s41467-023-42866-3DOI Listing

Publication Analysis

Top Keywords

synchronous micromechanically
8
micromechanically resonant
8
programmable photonic
8
mechanical resonances
8
programmable pics
8
programmable
4
resonant programmable
4
photonic circuits
4
circuits programmable
4
photonic integrated
4

Similar Publications

Noise-enhanced stability in synchronized systems.

Sci Adv

August 2025

Department of Mechanics, Key Laboratory of Soft Machines and Smart Devices of Zhejiang Province, Zhejiang University, Hangzhou 310027, China.

Synchronization underpins coherence in natural and engineered systems, unifying dynamics and countering noise while remaining vulnerable to disturbances threatening the stability and risking desynchronization. Here, we present a counterintuitive approach: harnessing noise to dilute the energy of unwanted fluctuations from external disturbances, thereby enhancing stability while preserving synchronization through the system's inherent noise suppression at the synchronized frequency. Through experiments with micromechanical oscillators and macroscale rotors, combined with stochastic averaging analysis, we show that this noise dilution effect improves synchronization efficiency, bolsters resistance to interference, and enhances long-term frequency stability.

View Article and Find Full Text PDF

A fair comparison of multiple live cell cultures requires examining them under identical environmental conditions, which can only be done accurately if all cells are prepared simultaneously and studied at the same time and place. This contribution introduces a multiplexed lensless digital holographic microscopy system (MLS), enabling synchronous, label-free, quantitative observation of multiple live cell cultures with single-cell precision. The innovation of this setup lies in its ability to robustly compare the behaviour, i.

View Article and Find Full Text PDF

This paper focuses on the size-dependent free vibration and buckling behaviors of the axially functionally graded (AFG) graphene platelets (GPLs) reinforced nanocomposite microbeams subjected to axially varying loads (AVLs). With various axial grading patterns, the GPL nano-reinforcements are distributed throughout the polymer matrix against microbeam length, and the improved Halpin-Tsai micromechanics model and the rule of mixture are adopted to evaluate the effective material properties. Eigenvalue equations of the microbeams governing the static stability and vibration are derived based on the modified couple stress Euler-Bernoulli beam theory via the state-space method, and are analytically solved with the discrete equilong segment model.

View Article and Find Full Text PDF

Nonlinearity-Induced Asymmetric Synchronization Region in Micromechanical Oscillators.

Micromachines (Basel)

February 2024

Department of Mechanics, Key Laboratory of Soft Machines and Smart Devices of Zhejiang Province, Zhejiang University, Hangzhou 310027, China.

Synchronization in microstructures is a widely explored domain due to its diverse dynamic traits and promising practical applications. Within synchronization analysis, the synchronization bandwidth serves as a pivotal metric. While current research predominantly focuses on symmetric evaluations of synchronization bandwidth, the investigation into potential asymmetries within nonlinear oscillators remains unexplored, carrying implications for sensor application performance.

View Article and Find Full Text PDF

Programmable photonic integrated circuits (PICs) are emerging as powerful tools for control of light, with applications in quantum information processing, optical range finding, and artificial intelligence. Low-power implementations of these PICs involve micromechanical structures driven capacitively or piezoelectrically but are often limited in modulation bandwidth by mechanical resonances and high operating voltages. Here we introduce a synchronous, micromechanically resonant design architecture for programmable PICs and a proof-of-principle 1×8 photonic switch using piezoelectric optical phase shifters.

View Article and Find Full Text PDF