98%
921
2 minutes
20
An optically anisotropic alkali-earth-metal gallium fluoroiodate, Ba[GaF(IOF)] (), was ingeniously obtained by integrating fluoride and fluoroiodate functional units under moderate hydrothermal conditions. It features a three-dimensional (3D) structure constructed by the highly polarizable fluoroiodate unit [IOF] and the fluoride groups [GaOF] and [BaOF] ( = 6, 7). The compound is stable at temperatures up to 500 °C. With the synergistic interaction between [IOF] and the fluoride groups, the mixed-metal fluoroiodate induces a short ultraviolet cutoff edge at about 230 nm, a medium measured birefringence of 0.068 @ 550 nm, and a wide optical transparent window (0.34-11.9 μm), indicating that has potential applications as a birefringent material from near-UV to mid-infrared. Theoretical calculations prove that the optical characteristics of the compound are mainly attributed to [IOF] and the fluoride functional groups. This work demonstrates that the presence of various specific functional groups in compounds will help to develop promising inorganic functional materials possessing good optical performance.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acs.inorgchem.3c02213 | DOI Listing |
Chin Med J (Engl)
September 2018
Department of Dermatology, Jingxi Campus, Beijing Chaoyang Hospital, Capital Medical University, Beijing 100043, China.
The combination of in situ spectrophotometry during film deposition and ex situ spectrophotometry allows insight into the depth distribution of optical losses in plasma ion assisted deposition coatings. An adapted optical characterization strategy for absorbing coatings using only in situ transmittance data has been developed and is exemplified in application to magnesium fluoride coatings. Measurements and simulation results strongly indicate an increased absorption caused by local understoichiometry of the fluoride material close to the fused silica substrate.
View Article and Find Full Text PDFAppl Opt
March 2006
Fraunhofer-Institut für Angewandte Optik und Feinmechanik, Albert Einstein Strasse 7, Jena 07745, Germany.
Vacuum-ultraviolet (VUV) narrow-bandpass filters with central wavelengths at 177.5, 180.7, and 193 nm are necessary for analytical chemistry applications and for atomic emission spectrum separation.
View Article and Find Full Text PDFAppl Opt
January 2006
Fraunhofer-Institut für Angewandte Optik und Feinmechanik, Albert Einstein Strasse 7, Jena 07745, Germany.
We discuss the approaches to preserve the high-reflectance aluminum mirror for the vacuum-ultraviolet spectral region. Single fluoride and oxide layers, a homogeneous multilayer, and hybrid multilayer solutions are put forward. Single fluoride and oxide materials have achieved reflectance above 90% at 193 nm.
View Article and Find Full Text PDFInorg Chem
August 2003
Loker Hydrocarbon Research Institute, University of Southern California, University Park, Los Angeles, California 90089, USA.
The combination of CH(3)CN solutions of [N(CH(3))(4)][F] and a mixture of cis- and trans-[N(CH(3))(4)][IO(2)F(4)] produces the novel trans-IO(2)F(5)(2)(-) anion. Under the given conditions, only the trans-IO(2)F(4)(-) anion acts as a fluoride ion acceptor, thus allowing the separation of isomerically pure, soluble cis-IO(2)F(4)(-) from insoluble trans-IO(2)F(5)(2)(-). The trans-IO(2)F(5)(2)(-) and cis-IO(2)F(4)(-) anions were characterized by infrared and Raman spectroscopy and theoretical calculations at the LDFT and HF levels of theory.
View Article and Find Full Text PDF