Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Compactness has obtained sufficient importance in wideband phase shifter design considerations, as it is directly related to fabrication cost. In this paper, a novel structure was presented to create compact broadband 180-degree phase shifter, which has the advantages of enhanced bandwidth and significantly reduced chip area. The proposed configuration consists of edge-coupled multi-microstrip lines (ECMML) and an artificial transmission line (ATL) with dual-shorted inductors, both of which have the periodic shunt load of capacitors. The ECMML can provide a high coupling coefficient, leading to an increase in the bandwidth, while the introduced capacitors can greatly reduce the line length (35.8% of the conventional method). To verify the relevant mechanisms, a wideband switched network with compact dimensions of 0.67 × 0.46 mm was designed via 0.15-micrometer GaAs pHEMT technology. Combined with the measured switch transistor, it was shown that the proposed phase shifter exhibits an insertion loss of less than 2 dB, a return loss of greater than 12 dB, a maximum phase error of less than 0.6° and a channel amplitude difference of less than 0.1 dB in the range of 10 to 20 GHz.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10537668PMC
http://dx.doi.org/10.3390/mi14091692DOI Listing

Publication Analysis

Top Keywords

phase shifter
16
180-degree phase
8
edge-coupled multi-microstrip
8
artificial transmission
8
phase
5
compact bandwidth-enhanced
4
bandwidth-enhanced 180-degree
4
shifter
4
shifter edge-coupled
4
multi-microstrip artificial
4

Similar Publications

The ability to dynamically shape ultrasound fields is critical for emerging applications in therapeutic ultrasound, particle manipulation and tissue engineering. While existing phased arrays provide beam steering for imaging, these newer applications require higher intensities. This complicates the electrical driving and ultimately limits the array size and spatial complexity of the field.

View Article and Find Full Text PDF

We present low-loss (<1.5) and power-efficient Mach-Zehnder interferometers (MZIs) on thin-film lithium niobate. To accurately measure small MZI losses, we develop a self-calibrated method using tunable Sagnac loop reflectors (SLRs) to build cavities.

View Article and Find Full Text PDF

Silicon photonic devices are fundamental to high-density wavelength-division multiplexed (DWDM) optical links and photonic switching networks, such as resonant modulators and Mach-Zehnder interferometers (MZIs), and are highly sensitive to fabrication variations and operational temperature swings. However, thermal tuning to compensate for fabrication and operational temperature variations can result in prohibitive power consumption, challenging the scalability of energy-efficient photonic integrated circuits (PICs). In this work, we develop and demonstrate a wafer-scale thermal undercut process in a 300 mm complementary metal oxide semiconductor (CMOS) foundry that dramatically improves the thermal isolation of thermo-optic devices by selectively removing substrate material beneath the waveguides and resonators.

View Article and Find Full Text PDF

Frequency-comb-steered ultrawideband quasi-true-time-delay beamformer for integrated sensing and communication.

Nat Commun

August 2025

Department of Electronic Engineering, Beijing National Research Center for Information Science and Technology, Tsinghua University, Beijing, China.

Ultrawideband beamforming is essential for next-generation radar and communication systems, however, the instantaneous bandwidth of phase-shifter-based phased array antennas (PAAs) is limited by beam squint. Photonic true-time-delay (TTD) beamformers offer a potential solution, yet their practical deployment is hindered by complex delay-line architectures. Here, we report a frequency-comb-steered photonic quasi-TTD beamforming approach that eliminates delay lines by leveraging frequency-diverse arrays and photonic microwave mixing arrays.

View Article and Find Full Text PDF

A thermo-optic 3 × 3 interferometer switch is proposed and demonstrated experimentally on silicon photonic platform. The switch is composed of two 3 × 3 multi-mode interferometer (MMI) and three interferometer arms equipped with spiral thermo-optic phase shifters (STOPS). The switching operation of the device is successfully demonstrated by heating the STOPS.

View Article and Find Full Text PDF