98%
921
2 minutes
20
Local mechanical stimuli in the bone microenvironment are essential for the homeostasis and adaptation of the skeleton, with evidence suggesting that disruption of the mechanically-driven bone remodelling process may lead to bone loss. Longitudinal clinical studies have shown the combined use of high-resolution peripheral quantitative computed tomography (HR-pQCT) and micro-finite element analysis can be used to measure load-driven bone remodelling in vivo; however, quantitative markers of bone mechanoregulation and the precision of these analyses methods have not been validated in human subjects. Therefore, this study utilised participants from two cohorts. A same-day cohort (n = 33) was used to develop a filtering strategy to minimise false detections of bone remodelling sites caused by noise and motion artefacts present in HR-pQCT scans. A longitudinal cohort (n = 19) was used to develop bone imaging markers of trabecular bone mechanoregulation and characterise the precision for detecting longitudinal changes in subjects. Specifically, we described local load-driven formation and resorption sites independently using patient-specific odds ratios (OR) and 99 % confidence intervals. Conditional probability curves were computed to link the mechanical environment to the remodelling events detected on the bone surface. To quantify overall mechanoregulation, we calculated a correct classification rate measuring the fraction of remodelling events correctly identified by the mechanical signal. Precision was calculated as root-mean-squared averages of the coefficient of variation (RMS-SD) of repeated measurements using scan-rescan pairs at baseline combined with a one-year follow-up scan. We found no significant mean difference (p < 0.01) between scan-rescan conditional probabilities. RMS-SD was 10.5 % for resorption odds, 6.3 % for formation odds, and 1.3 % for correct classification rates. Bone was most likely to be formed in high-strain and resorbed in low-strain regions for all participants, indicating a consistent, regulated response to mechanical stimuli. For each percent increase in strain, the likelihood of bone resorption decreased by 2.0 ± 0.2 %, and the likelihood of bone formation increased by 1.9 ± 0.2 %, totalling 38.3 ± 1.1 % of strain-driven remodelling events across the entire trabecular compartment. This work provides novel robust bone mechanoregulation markers and their precision for designing future clinical studies.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.bone.2023.116780 | DOI Listing |
Adv Healthc Mater
September 2025
Smart Materials, NanoSYD, Mads Clausen Institute, University of Southern Denmark, Alsion 2, Sønderborg, DK-6400, Denmark.
This study presents a comprehensive framework combining Selective Laser Melting (SLM) of Titanium (Ti64) alloys, finite element simulation, and artificial intelligence (AI) to advance orthopedic implants' design and predictive evaluation. Dense Ti64 specimens are fabricated using ten distinct SLM parameter sets to explore the effects of volumetric energy density (VED) on mechanical behavior, porosity distribution, and microstructural integrity. Optimal VED ranges are identified to balance defect minimization and mechanical performance, with porosity levels strongly influencing tensile strength and Young's modulus.
View Article and Find Full Text PDFBiomech Model Mechanobiol
September 2025
Insigneo Institute, University of Sheffield, Sheffield, UK.
Understanding how bone adapts to external forces is fundamental for exploring potential biomechanical interventions against skeletal diseases. This can be studied preclinically, combining in vivo experiments in rodents and in silico mechanoregulation models. While the in vivo tibial loading model is widely used to study bone adaptation, the common assumption of purely axial loading may be a simplification.
View Article and Find Full Text PDFComput Biol Med
September 2025
Musculoskeletal Translational Innovation Initiative, Beth Israel Deaconess Medical Center, Harvard Medical School, Boston, MA, USA; Department of Mechanical Engineering, Boston University, Boston, MA, USA; Department of Orthopaedic Surgery, Yerevan State Medical University, Yerevan, Armenia. Electro
Background: Fracture healing is a complex, time-dependent process governed by biological and mechanical factors, including implant properties. While finite element (FE) modeling provides detailed mechanobiological insights into this process, its computational cost remains a major limitation for widespread clinical or research use. In this study, we developed and validated a machine learning (ML) framework as a rapid alternative for a previously validated 21-day mechanoregulation-based FE model of femoral fracture healing in rodents.
View Article and Find Full Text PDFSci Rep
July 2025
Laboratory of Biomedical and Biophysical Chemistry, Institute for Materials Chemistry and Engineering, Kyushu University, 744 Moto-Oka, Nishi Ku, Fukuoka, Japan.
The Bone marrow-derived mesenchymal stem cells (MSCs) are widely used in clinical applications owing to their therapeutic properties. However, in vitro expansion of MSCs in tissue culture dishes induces aging, which reduces their quality through an undefined mechanism. This study delineates the role of substrate stiffness as a potential modulator to delay MSC aging by elucidating the senescence progression of preconditioned and serially passaged MSCs on engineered stiffness-tunable gelatinous hydrogels.
View Article and Find Full Text PDFJ Mech Behav Biomed Mater
October 2025
Department of Mechanics of Materials and Structures, Faculty of Civil and Environmental Engineering, Gdańsk University of Technology, Narutowicza 11/12, 80-233, Gdańsk, Poland.
In the paper the load capacity and mechanoregulation properties of a 3D printed gyroid scaffold made of pure PLA implanted into the long bone defect are assessed. The constitutive law of the material is estimated based on experimental data and a finite element method (FEM) model. Within the FEM, the bone healing process is simulated, considering the biphasic nature of the tissues and making use of the Prendergast mechanoregulation theory, where the mechanical stimuli include octahedral shear strain and interstitial fluid velocity.
View Article and Find Full Text PDF