98%
921
2 minutes
20
Stable and efficient high-power biohybrid light-emitting diodes (Bio-HLEDs) using fluorescent proteins (FPs) in photon downconverting filters have not been achieved yet, reaching best efficiencies of 130 lm W stable for >5 h. This is related to the rise of the device temperature (70-80 °C) caused by FP-motion and quick heat-transmission in water-based filters, they lead to a strong thermal emission quenching followed by the quick chromophore deactivation via photoinduced H-transfer. To tackle both issues at once, this work shows an elegant concept of a new FP-based nanoparticle, in which the FP core is shielded by a SiO -shell (FP@SiO ) with no loss of the photoluminescence figures-of-merit over years in foreign environments: dry powder at 25 °C (ambient) or constant 50 °C, as well as suspensions in organic solvents. This enables the preparation of water-free photon downconverting coatings with FP@SiO , realizing on-chip high-power Bio-HLEDs with 100 lm W stable for >120 h. Both thermal emission quenching and H-transfer deactivation are suppressed, since the device temperature holds <40 °C and remote high-power Bio-HLEDs exhibit final stabilities of 130 days compared to reference devices with water-based FP@SiO (83 days) and FP-polymer coatings (>100 h). Hence, FP@SiO is a new paradigm toward water-free zero-thermal-quenching biophosphors for first-class high-power Bio-HLEDs.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC10238177 | PMC |
http://dx.doi.org/10.1002/advs.202300069 | DOI Listing |
ACS Nano
September 2023
Applied Nano and Thermal Science Lab, Department of Mechanical Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul, 08826, Korea.
Metal nanomaterials are highly valued for their enhanced surface area and electrochemical properties, which are crucial for energy devices and bioelectronics. However, their practical applications are often limited by challenges, such as scalability and dimensional constraints. In this study, we developed a synthesis method for highly porous Ag-Au core-shell nanowire foam (AACNF) using a one-pot process based on a simultaneous nanowelding synthesis method.
View Article and Find Full Text PDFAdv Sci (Weinh)
June 2023
Chair of Biogenic Functional Materials, Technical University of Munich, Schulgasse, 22, 94315, Straubing, Germany.
Stable and efficient high-power biohybrid light-emitting diodes (Bio-HLEDs) using fluorescent proteins (FPs) in photon downconverting filters have not been achieved yet, reaching best efficiencies of 130 lm W stable for >5 h. This is related to the rise of the device temperature (70-80 °C) caused by FP-motion and quick heat-transmission in water-based filters, they lead to a strong thermal emission quenching followed by the quick chromophore deactivation via photoinduced H-transfer. To tackle both issues at once, this work shows an elegant concept of a new FP-based nanoparticle, in which the FP core is shielded by a SiO -shell (FP@SiO ) with no loss of the photoluminescence figures-of-merit over years in foreign environments: dry powder at 25 °C (ambient) or constant 50 °C, as well as suspensions in organic solvents.
View Article and Find Full Text PDFBio Protoc
April 2021
Graduate Aerospace Laboratories (GALCIT), California Institute of Technology, Pasadena, CA, USA.
Biohybrid robotics is a growing field that incorporates both live tissues and engineered materials to build robots that address current limitations in robots, including high power consumption and low damage tolerance. One approach is to use microelectronics to enhance whole organisms, which has previously been achieved to control the locomotion of insects. However, the robotic control of jellyfish swimming offers additional advantages, with the potential to become a new ocean monitoring tool in conjunction with existing technologies.
View Article and Find Full Text PDF