98%
921
2 minutes
20
Tadalafil is an illegal additive in antifatigue supplements. It is often misused in various plant dietary supplements (BDS), resulting in serious health risks. In this paper, terahertz spectroscopy combined with chemometrics is used to quantitatively analyze the content of tadalafil in nutritional and health products. The absorption coefficient spectrum of tadalafil in the range of 0.1-2.5 THz was obtained, and an obvious characteristic absorption peak appeared at 1.7 THz. To verify the accuracy of this characteristic absorption peak theoretically, tadalafil was simulated by density functional theory, and the calculated terahertz vibration spectrum matched well with the experimental spectrum. Then, the pure fatigue-based nutraceutical matrix and pure tadalafil were mixed in different proportions, and the terahertz absorption coefficient spectra of the mixtures were obtained. Finally, a quantitative analysis model of the tadalafil mixture was developed based on the support vector regression (SVR) algorithm, and the SVR model was optimized using particle swarm optimization (PSO) and genetic algorithm (GA), respectively. Compared with the SVR model, both PSO-SVR and GA-SVR enabled some improvement in their prediction accuracy, but the PSO-SVR model ran faster at 4.85 s, whereas the GA-SVR model had a higher prediction accuracy with a prediction set correlation coefficient ( ) of 0.9996 and a root mean square error (RMSEP) of 0.011. In summary, this study used terahertz time-domain spectroscopy for the identification and quantification of tadalafil in health product matrices. This study provides a new solution for the nondestructive detection of illegally added tadalafil in antifatigue health products, which is pivotal to the quality control of the health product industry.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1364/AO.462727 | DOI Listing |
J Sep Sci
September 2025
Department of Analytical Chemistry, Faculty of Science, Palacký University Olomouc, Olomouc, Czech Republic.
The increasing use of engineered nanoparticles (NPs) in consumer and biomedical products has raised concern over their potential accumulation, transformation, and toxicity in biological systems. Accurate analytical methods are essential to detect, characterize, and quantify NPs in complex biological matrices. Inductively coupled plasma mass spectrometry (ICP-MS) has emerged as a leading technique due to its high sensitivity, elemental selectivity, and quantitative capabilities.
View Article and Find Full Text PDFAnal Bioanal Chem
September 2025
GuangDong Engineering Technology Research Center of Antibody Drug and Immunoassay, Department of Biological Sciences and Biotechnology, College of Life Science and Technology, Jinan University, Guangzhou, 510632, China.
Illicit drug abuse poses a significant global threat to public health and social security, highlighting the urgent need for rapid, sensitive, and versatile detection technologies. To address the limitations of traditional chromatographic techniques-such as high costs and slow response times-and the drawbacks of conventional immunochromatographic sensors (ICS), including low sensitivity and non-intuitive signal outputs, a fluorescence-quenching ICS (FQICS) was developed. This sensor leverages fluorescence resonance energy transfer (FRET) between aggregation-induced emission fluorescent microspheres (AIEFMs) and gold nanoparticles (AuNPs).
View Article and Find Full Text PDFEnviron Res
September 2025
College of Chemistry, Chemical Engineering and Environment, Minnan Normal University, Zhangzhou 363000, China; Fujian Province Key Laboratory of Morden Analytical Science and Separation Technology, Minnan Normal University, Zhangzhou 363000, China; Fujian Provincial University Key Laboratory of Poll
The derivation of defect-engineered metal-organic frameworks (MOFs) from industrial waste simultaneously mitigates environmental pollution, reduces MOF synthesis costs, and enhances adsorption performance. Herein, this study demonstrates a sustainable strategy for the resourceful synthesis of iron-based MOF s-MIL-100(Fe) using galvanizing pickling waste liquor (80.5 wt.
View Article and Find Full Text PDFEur J Pharm Sci
September 2025
Department of Biopharmaceutics and Pharmaceutical Technology, Institute of Pharmaceutical and Biomedical Sciences, Johannes Gutenberg University, Mainz, Germany.
The use of single-use systems in the manufacturing of biopharmaceuticals raises concerns about the accumulation of process equipment-related leachables in their production and purification processes. However, this risk is mitigated by effective sinks in the manufacturing processes and dilution of product flow, for example, in tangential-flow-filtration. This paper presents a modeling approach that combines the release and adsorption of compounds with dynamic process conditions of biopharmaceutical processes.
View Article and Find Full Text PDFSmall
September 2025
School of Chemistry and Chemical Engineering, Guangxi Key Laboratory of AI-Driven Zero-Carbon Technologies, Key Laboratory of New Low-carbon Green Chemical Technology Education Department of Guangxi Zhuang Autonomous Region, Guangxi University, Nanning, 530004, China.
Sarcosine (Sar), a critical potential biomarker for prostate cancer (PCa), is primarily detected via enzyme cascade reactions involving sarcosine oxidase (SOx) and peroxidase. Nevertheless, the intermediate product hydrogen peroxide (HO) tends to diffuse to the bulk solution phase without entering subsequent reaction, leading to suboptimal detection sensitivity and compromised analytical performance. To tackle this challenge, a multilayered sandwich nanozyme cascade sensor (designated as Cu-MOF/Rf@BDC) is proposed through a confinement-mediated HO enrichment strategy.
View Article and Find Full Text PDF