98%
921
2 minutes
20
Zero-valent iron (ZVI) materials have been developed and applied to treat various pollutants due to their strong reducing properties and large specific surface area. Red mud contains a large amount of iron oxide and therefore can be used as a source of iron base for the preparation of ZVI materials. Industrial reduction of iron oxides to prepare ZVI materials requires high temperatures resulting in high energy consumption and high costs. Biomass can be pyrolyzed at low temperatures to release large amounts of reducing gas, which can efficiently reduce red mud to obtain ZVI at lower temperatures. Therefore, this paper studied the pyrolysis of five biomasses, corn straw, wheat straw, rice husk, pine wood and coffee grounds, and compared the reduction of iron oxide in red mud at different temperatures for different biomass feedstocks. The results showed that the biomass could reduce most of the iron oxide in red mud to ZVI at 800 °C, which was at least 100 °C lower than the conventional iron reduction temperature. The reducing gas greatly facilitated the conversion of iron oxide to ZVI in this process. Moreover, the material has a good removal effect on both gentian violet and methylene blue. A low-energy and low-cost method was explored for the preparation of ZVI materials, and the resource utilization of biomass and red mud was realized.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.scitotenv.2022.160907 | DOI Listing |
Environ Res
September 2025
National Key Laboratory of Deep Coal Mining Safety and Environmental Protection, Anhui University of Science and Technology, Huainan, 232001, Anhui, China.
Zeolite synthesis from fly ash offers recycling and environmental benefits for carbon dioxide capture, but varying fly ash composition from different sources has different compositions, leading to inconsistent adsorption results. To achieve high CO adsorption performance and stability in zeolite synthesis from fly ash systems, this study established an element-controlled simulated fly ash system with Ca/Fe gradient differences. Hydrothermal synthesis yielded zeolites with optimized oxide ratios for CO adsorption.
View Article and Find Full Text PDFEnviron Res
September 2025
China Construction Fourth Engineering Bureau Fifth Construction Engineering Co., Ltd. Nanxin Road, Nanshan District, Shenzhen, 518000, China. Electronic address:
The production of phosphogypsum (PG), calcium carbide slag (CS), and red mud (RM) in global industrial development imposes serious environmental issues. Utilizing CS and PG as curing agents and incorporating RM as a soil substitute can facilitate the solid waste resource utilization. However, few studies have investigated the synergistic effects of PG and CS on the stabilization of RM and soil.
View Article and Find Full Text PDFBiology (Basel)
August 2025
College of Biological and Environmental Engineering, Guiyang University, Guiyang 550005, China.
Preparing red mud/phosphogypsum-based artificial soils for vegetation restoration is promising. However, how artificial soil develops during vegetation restoration is unclear, especially regarding the relationship between the bacterial community and the development of artificial soil. The bacterial community changes in the early-stage engineering simulation of red mud/phosphogypsum-based artificial soil vegetation restoration were analyzed for the first time in this paper.
View Article and Find Full Text PDFSci Rep
September 2025
Department of Chemistry, Faculty of Basic Sciences, Ayatollah Boroujerdi University, Boroujerd, Iran.
This study revealed the synthesis of a novel metal-organic framework (MOF) through the reaction between red mud as an industrial waste material, and trimesic acid (TCA) for the adsorption of methyl orange (MO) through Response Surface Methodology (RSM) from aqueous solutions. The synthesis process utilized red mud as a sustainable source of metal ions and TCA as the organic linker to obtain Red Mud-Trimesic Acid MOF (RM/TCA-MOF) under hydrothermal conditions. The synthesized MOF was characterized using various techniques such as Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Field emission scanning electron microscopy (FE-SEM), Energy dispersive X-ray (EDX), Brunauer-Emmett-Teller (BET) surface area analysis, Transmission electron microscopy (TEM), and Thermogravimetric Analysis (TGA).
View Article and Find Full Text PDFMaterials (Basel)
August 2025
College of Urban and Rural Construction, Shanxi Agricultural University, Jinzhong 030800, China.
To address the environmental risks associated with large-scale stockpiling of red mud (RM) and coal gangue (CG) and the demand for their high-value utilization, this study proposes a ternary concrete system incorporating RM, fly ash (FA), and CG aggregate. The effects of RM content, FA content, CG aggregate replacement rate, and water-to-binder ratio on workability, mechanical properties, and frost resistance durability were systematically investigated through orthogonal experiments, with the underlying micro-mechanisms revealed by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The results indicate that workability is predominantly governed by the water-to-binder ratio, while the micro-aggregate effect of FA significantly enhances fluidity.
View Article and Find Full Text PDF