Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

The rational defect engineering of Mn-based spinel cathode materials by metal-ion doping and vacancy creation fosters reversible intercalation/deintercalation of charge carriers and boosts the charge storage performance of an aqueous rechargeable zinc-ion battery (ZIB). Herein, we demonstrate the Zn ion storage performance of a defect-engineered ternary spinel cathode based on Zn, Ni, and Mn. The defect engineering of ZnMnO is achieved by Ni doping and creating a cation (Mn and Zn) deficiency. The engineered cathode material has cubic spinel structure in contrast to the defect-free ZnMnO. The DFT studies show that the defect engineering modifies the electronic structure and improves the electronic conductivity. An aqueous rechargeable ZIB is fabricated by using the spinel cathode, and its performance is evaluated in terms of charge-discharge cycling stability, specific capacity, and so on. The ternary spinel-based ZIB has a very long charge-discharge cycling stability with a specific capacity as high as 265 mAh g (at 100 mA g). A 2-fold enhancement in the specific capacity is observed after 5000 cycles. Ni doping affords ultralong cycling stability. The self-discharge studies for a year show that the device retains 63% of the initial performance.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.2c04596DOI Listing

Publication Analysis

Top Keywords

aqueous rechargeable
12
defect engineering
12
spinel cathode
12
cycling stability
12
specific capacity
12
ternary spinel
8
rechargeable zinc-ion
8
zinc-ion battery
8
storage performance
8
charge-discharge cycling
8

Similar Publications

With the rapid advancement of science and technology, rechargeable aqueous zinc ion batteries (AZIBs) has garnered increasing attention in consideration of security, chemical stability and cost-effectiveness. Vanadium-based oxides have emerged as a promising high-performance electrode materials for AZIBs, owing to their high energy density, rich crystal configurations, and simple preparation process. However, the practical application of vanadium oxides is hindered by their low ion/electron transfer rate and significant capacity fading during electrochemical reactions.

View Article and Find Full Text PDF

Aqueous rechargeable sodium-ion batteries (ARNIBs) are emerging as cost-effective and safe candidates for large-scale energy storage applications. However, their advancement has been constrained by the narrow electrochemical stability window (ESW) of conventional aqueous electrolytes (1.23 V).

View Article and Find Full Text PDF

Conquering Shuttle Effect and Dendrites Synergistically: A Zwitterionic Bacterial Cellulose Hydrogel Electrolyte for Ultralong-Lifespan Zn-I Batteries.

Small

August 2025

CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, CAS Center for Excellence in Complex System Mechanics, University of Science and Technology of China, Hefei, 230027, China.

Rechargeable aqueous zinc-iodine batteries (ZIBs) hold significant promise for energy storage. Their advancement, however, faces critical challenges: soluble polyiodide shuttling and rampant Zn dendrite growth. This work introduces a polyampholyte bacterial cellulose hydrogel electrolyte (SBC) engineered to overcome these limitations.

View Article and Find Full Text PDF

The aqueous rechargeable magnesium ion batteries (ARMBs) are considered as one of the promising alternatives for the lithium organic batteries (Libs). However, the strong Coulombic repulsion brought by divalent alkaline earth metal ions (Mg) poses a new challenge to the stability of electrode materials. We present for the first time the introduction of a ternary medium-entropy effect (Fe, Mn and Co) at the 4b-active-site of the high spin (HS) of the Prussian blue analog (named KMEHCF) to enhance the "sp-mixing" effect of its cyanogen structure.

View Article and Find Full Text PDF

Rechargeable aqueous zinc-ion batteries (AZIBs) have become a viable option in electrochemical energy storage systems (EESS) owing to their inherent safety features and economic friendliness. Nonetheless, creating suitable cathode materials for AZIBs with high structural stability, good rate performance, and great capacity remains a significant challenge. Polyoxometalate (POM)-based nanohybrid materials have shown promising results in high cycling stability and great specific capacity.

View Article and Find Full Text PDF