98%
921
2 minutes
20
. In this paper, we focus on the dielectric and mechanical characterization of tissue-mimicking breast phantoms.. Starting from recipes previously proposed by our research group, based on easy-to-handle, cheap and safe components (i.e. sunflower oil, deionized water, dishwashing liquid and gelatin), we produced and tested, both dielectrically and mechanically, more than 100 samples. The dielectric properties were measured from 500 MHz to 14 GHz, the Cole-Cole parameters were derived to describe the dielectric behaviour in a broader frequency range, and the results were compared with dielectric properties of human breasttissues up to 50 GHz. The macroscale mechanical properties were measured by means of unconfined compression tests, and the impact of the experimental conditions (i.e. preload and test speed) on the measured Young's moduli was analysed. In addition, the mechanical contrast between healthy- and malignant-tissue-like phantoms was evaluated.. The results agree with the literature in the cases in which the experimental conditions are known, demonstrating the possibility to fabricate phantoms able to mimic both dielectric and mechanical properties of breast tissues.. In this work, for the first time, a range of materials reproducing all the categories of breast tissues were experimentally characterized, both from a dielectric and mechanical point of view. A large range of frequency were considered for the dielectric measurements and several combinations of experimental conditions were investigated in the context of the mechanical characterization. The proposed results can be useful in the design and testing of complementary or supplementary techniques for breast cancer detection based on micro/millimetre-waves, possibly in connection with other imaging modalities.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1088/1361-6560/ac7bcc | DOI Listing |
Adv Mater
September 2025
Departmant of Materials Science and Engineering, Seoul National University, Seoul, 08826, Republic of Korea.
Microrobots are expected to push the boundaries of robotics by enabling navigation in confined and cluttered environments due to their sub-centimeter scale. However, most microrobots perform best only in the specific conditions for which they are designed and require complete redesign and fabrication to adapt to new tasks and environments. Here, fully 3D-printed modular microrobots capable of performing a broad range of tasks across diverse environments are introduced.
View Article and Find Full Text PDFACS Omega
September 2025
School of Chemical and Materials Engineering (SCME), National University of Sciences & Technology (NUST), H-12, Islamabad 44000, Pakistan.
In this study, we present an indigenous approach to enhancing the properties of Pb-(ZrTi)-O by synthesizing it from β-PbO obtained from spent lead-acid batteries. Initially, β-PbO, orthorhombic massicot, was produced by two-step heating, and 99.9% lead powder was derived from recovered lead-acid batteries at 700 °C.
View Article and Find Full Text PDFRSC Adv
August 2025
University of Coimbra, CEMMPRE, ARISE, Department of Mechanical Engineering Rua Luís Reis Santos Coimbra 3030-788 Portugal.
This study addresses the growing need for sustainable and multifunctional materials by developing novel polycaprolactone (PCL)/chitosan (CS)/zirconium dioxide (ZrO) nanocomposite films. While PCL and CS offer biocompatibility and biodegradability, their combined use presents limitations for advanced applications requiring specific functional features. The incorporation of ZrO nanoparticles aims to overcome these limitations and create materials with enhanced mechanical, electrical, optical, and antibacterial properties.
View Article and Find Full Text PDFRSC Adv
August 2025
University of Coimbra, CFisUC, Physics Department Rua Larga P-3004-516 Coimbra Portugal
Nanoscale materials are attracting a great deal of attention due to their exceptional properties, making them indispensable for many advanced applications. Among these materials, spinel ferrites stand out for their potential applications in electronic, optoelectronic, energy storage and other devices. This is why the development of a synthesis process combined with rigorous optimization of annealing conditions is provided to be an essential approach to control nanoparticle formation and fine-tuning their structural, morphological and functional characteristics.
View Article and Find Full Text PDFRSC Adv
August 2025
Institute of Nanoscience and Nanotechnology, National Center for Scientific Research "Demokritos" Agia Paraskevi 15341 Greece.
In this study, porous polysiloxane (PS)/multi-walled carbon nanotube (MWCNT) nanocomposite films were developed as high-performance triboelectric layers for flexible triboelectric nanogenerators (TENGs). TENGs convert mechanical motion into electricity and offer a promising solution for self-powered electronic systems. The nanocomposites were fabricated using a doctor blading method, and porosity was introduced a simple, scalable salt-leaching technique.
View Article and Find Full Text PDF