Category Ranking

98%

Total Visits

921

Avg Visit Duration

2 minutes

Citations

20

Article Abstract

Many studies have recently investigated the characteristics of combustion products emitted from ships and onshore plant facilities for use as energy sources. Most combustion products that have been reported until now are from heavy oils, however, no studies on those from light oils have been published. This study attempted to use the combustion products from the light oils from naval ships as anode materials for lithium ion batteries (LIBs). These products have a carbon black morphology and were transformed into highly crystalline carbon structures through a simple heat treatment. These new structured materials showed reversible capacities of 544, 538, 510, 485, 451 and 395 mA h g at C-rates of 0.1, 0.2, 0.5, 1.0, 2.0 and 5.0C, respectively, and excellent rate performance. These findings were the result of a combination hierarchical pores ranging from the meso- to macroscale and the high capacitive charge storage behavior of the soot. The results of this study prove that annealed soot with a unique multilayer graphite structure shows promising electrochemical performance suitable for the production of low-cost, high-performance LIB anode materials.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC9056966PMC
http://dx.doi.org/10.1039/d0ra07195aDOI Listing

Publication Analysis

Top Keywords

combustion products
12
lithium ion
8
ion batteries
8
light oils
8
anode materials
8
application soot
4
soot discharged
4
combustion
4
discharged combustion
4
combustion marine
4

Similar Publications

The retinol isotope dilution (RID) test is the most sensitive method to assess vitamin A status by estimating total liver reserves, considered the reference standard. For gas chromatography-combustion-isotope ratio mass spectrometry detection, C is added to the retinol moiety. The synthetic procedure for C-retinyl acetate begins with the naturally occurring β-ionone.

View Article and Find Full Text PDF

The U.S. Food and Drug Administration has proposed a nicotine-limiting standard, which would increase the unit price of nicotine in cigarettes and could cause people who smoke and are unable/unwilling to quit nicotine to switch to other products.

View Article and Find Full Text PDF

The production of diesel-biodiesel blends (DBB) aims to mitigate the environmental impacts of diesel combustion. However, gaps remain in understanding their molecular properties, particularly fluorescence anisotropy (FA), which reflects molecular rotation and environmental constraints (e.g.

View Article and Find Full Text PDF

Plasma-Driven Decomposition of HAN-Based Ionic Liquids.

ACS Omega

September 2025

Ming Hsieh Department of Electrical Engineering, University of Southern California, Los Angeles, California 90089, United States.

A nanosecond pulse transient plasma is employed to initiate and control the exothermic decomposition of ionic liquids, namely, a mixture of hydroxylammonium nitrate (HAN) and 1-ethyl-3-methylimidazolium ethyl sulfate [EMIM]/[EtSO], as well as some noncombustible ionic liquids. Here, the plasma is discharged in a cylindrical geometry with a coaxial center wire electrode. High voltage (20 kV) nanosecond pulses (20 ns) at various frequencies up to 10 kHz produce a plasma discharge in the ionic liquid that initiates its nonthermal decomposition.

View Article and Find Full Text PDF

Study on Permeability and Flow Characteristics of Composite Thermosensitive Hydrogel and Its Fire Prevention and Extinguishment Performance.

ACS Omega

September 2025

State Key Laboratory for Fine Exploration and Intelligent Development of Coal Resources, China University of Mining and Technology, Xuzhou, Jiangsu 221116, People's Republic of China.

This study focuses on the issues of poor fluidity, low penetration into residual coal, and suboptimal inhibition of coal spontaneous combustion associated with traditional coal mine gel fire retardants. The permeability and flow characteristics of a sodium alginate-based composite thermosensitive hydrogel, as well as its fire prevention and extinguishment performance, were investigated. The findings suggest that the thermosensitive hydrogel behaves as a pseudoplastic fluid at 40 °C and a yield-pseudoplastic fluid at 65 °C, exhibiting shear-thinning behavior with increasing shear rate.

View Article and Find Full Text PDF